/* * Copyright (c) 2004, 2013, Oracle and/or its affiliates. All rights reserved. */ /* crypto/engine/e_pk11_pub.c */ /* * This product includes software developed by the OpenSSL Project for * use in the OpenSSL Toolkit (http://www.openssl.org/). * * This project also referenced hw_pkcs11-0.9.7b.patch written by * Afchine Madjlessi. */ /* * ==================================================================== * Copyright (c) 2000-2001 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * licensing@OpenSSL.org. * * 5. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft.com). This product includes software written by Tim * Hudson (tjh@cryptsoft.com). * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #ifndef OPENSSL_NO_RSA #include #endif /* OPENSSL_NO_RSA */ #ifndef OPENSSL_NO_DSA #include #endif /* OPENSSL_NO_DSA */ #ifndef OPENSSL_NO_DH #include #endif /* OPENSSL_NO_DH */ #include #include #include #include #include #ifndef OPENSSL_NO_HW #ifndef OPENSSL_NO_HW_PK11 #include #include #include "e_pk11.h" #include "e_pk11_uri.h" static CK_BBOOL pk11_login_done = CK_FALSE; extern CK_SLOT_ID pubkey_SLOTID; /* * During the reinitialization after a detected fork we will try to login to the * token using the passphrasedialog keyword that we inherit from the parent. */ char *passphrasedialog; #ifndef OPENSSL_NO_RSA /* RSA stuff */ static int pk11_RSA_public_encrypt(int flen, const unsigned char *from, unsigned char *to, RSA *rsa, int padding); static int pk11_RSA_private_encrypt(int flen, const unsigned char *from, unsigned char *to, RSA *rsa, int padding); static int pk11_RSA_public_decrypt(int flen, const unsigned char *from, unsigned char *to, RSA *rsa, int padding); static int pk11_RSA_private_decrypt(int flen, const unsigned char *from, unsigned char *to, RSA *rsa, int padding); static int pk11_RSA_init(RSA *rsa); static int pk11_RSA_finish(RSA *rsa); static int pk11_RSA_sign(int type, const unsigned char *m, unsigned int m_len, unsigned char *sigret, unsigned int *siglen, const RSA *rsa); static int pk11_RSA_verify(int dtype, const unsigned char *m, unsigned int m_len, const unsigned char *sigbuf, unsigned int siglen, const RSA *rsa); EVP_PKEY *pk11_load_privkey(ENGINE*, const char *privkey_id, UI_METHOD *ui_method, void *callback_data); EVP_PKEY *pk11_load_pubkey(ENGINE*, const char *pubkey_id, UI_METHOD *ui_method, void *callback_data); static int pk11_RSA_public_encrypt_low(int flen, const unsigned char *from, unsigned char *to, RSA *rsa); static int pk11_RSA_private_encrypt_low(int flen, const unsigned char *from, unsigned char *to, RSA *rsa); static int pk11_RSA_public_decrypt_low(int flen, const unsigned char *from, unsigned char *to, RSA *rsa); static int pk11_RSA_private_decrypt_low(int flen, const unsigned char *from, unsigned char *to, RSA *rsa); static CK_OBJECT_HANDLE pk11_get_public_rsa_key(RSA* rsa, PK11_SESSION *sp); static CK_OBJECT_HANDLE pk11_get_private_rsa_key(RSA* rsa, PK11_SESSION *sp); static int pk11_check_new_rsa_key_pub(PK11_SESSION *sp, const RSA *rsa); static int pk11_check_new_rsa_key_priv(PK11_SESSION *sp, const RSA *rsa); #endif /* DSA stuff */ #ifndef OPENSSL_NO_DSA static int pk11_DSA_init(DSA *dsa); static int pk11_DSA_finish(DSA *dsa); static DSA_SIG *pk11_dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa); static int pk11_dsa_do_verify(const unsigned char *dgst, int dgst_len, DSA_SIG *sig, DSA *dsa); static CK_OBJECT_HANDLE pk11_get_public_dsa_key(DSA* dsa, DSA **key_ptr, BIGNUM **dsa_pub_num, CK_SESSION_HANDLE session); static CK_OBJECT_HANDLE pk11_get_private_dsa_key(DSA* dsa, DSA **key_ptr, BIGNUM **dsa_priv_num, CK_SESSION_HANDLE session); static int check_new_dsa_key_pub(PK11_SESSION *sp, DSA *dsa); static int check_new_dsa_key_priv(PK11_SESSION *sp, DSA *dsa); #endif /* DH stuff */ #ifndef OPENSSL_NO_DH static int pk11_DH_init(DH *dh); static int pk11_DH_finish(DH *dh); static int pk11_DH_generate_key(DH *dh); static int pk11_DH_compute_key(unsigned char *key, const BIGNUM *pub_key, DH *dh); static CK_OBJECT_HANDLE pk11_get_dh_key(DH* dh, DH **key_ptr, BIGNUM **priv_key, CK_SESSION_HANDLE session); static int check_new_dh_key(PK11_SESSION *sp, DH *dh); #endif static int find_one_object(PK11_OPTYPE op, CK_SESSION_HANDLE s, CK_ATTRIBUTE_PTR ptempl, CK_ULONG nattr, CK_OBJECT_HANDLE_PTR pkey); static int init_template_value(BIGNUM *bn, CK_VOID_PTR *pValue, CK_ULONG *ulValueLen); static void attr_to_BN(CK_ATTRIBUTE_PTR attr, CK_BYTE attr_data[], BIGNUM **bn); static int pk11_pkey_meth_nids[] = {NID_dsa}; /* Read mode string to be used for fopen() */ #if SOLARIS_OPENSSL static char *read_mode_flags = "rF"; #else static char *read_mode_flags = "r"; #endif /* * Increment existing or create a new reference for an asymmetric key PKCS#11 * object handle in the active object list. If the operation fails, unlock (if * locked), set error variable and jump to the specified label. We use this list * so that we can track how many references to the PKCS#11 objects are used from * all our sessions structures. If we are replacing an object reference in the * session structure and the ref count for the reference being replaced gets to * 0 we know that we can safely free the object itself via C_ObjectDestroy(). * See also TRY_OBJ_DESTROY. */ #define KEY_HANDLE_REFHOLD(key_handle, alg_type, unlock, var, label) \ { \ if (pk11_active_add(key_handle, alg_type) < 0) \ { \ var = CK_TRUE; \ if (unlock) \ UNLOCK_OBJSTORE(alg_type); \ goto label; \ } \ } /* * Find active list entry according to object handle and return pointer to the * entry otherwise return NULL. * * This function presumes it is called with lock protecting the active list * held. */ static PK11_active *pk11_active_find(CK_OBJECT_HANDLE h, PK11_OPTYPE type) { PK11_active *entry; for (entry = active_list[type]; entry != NULL; entry = entry->next) if (entry->h == h) return (entry); return (NULL); } /* * Search for an entry in the active list using PKCS#11 object handle as a * search key and return refcnt of the found/created entry or -1 in case of * failure. * * This function presumes it is called with lock protecting the active list * held. */ int pk11_active_add(CK_OBJECT_HANDLE h, PK11_OPTYPE type) { PK11_active *entry = NULL; if (h == CK_INVALID_HANDLE) { PK11err(PK11_F_ACTIVE_ADD, PK11_R_INVALID_HANDLE); return (-1); } /* search for entry in the active list */ if ((entry = pk11_active_find(h, type)) != NULL) entry->refcnt++; else { /* not found, create new entry and add it to the list */ entry = OPENSSL_malloc(sizeof (PK11_active)); if (entry == NULL) { PK11err(PK11_F_ACTIVE_ADD, PK11_R_MALLOC_FAILURE); return (-1); } entry->h = h; entry->refcnt = 1; entry->prev = NULL; entry->next = NULL; /* connect the newly created entry to the list */ if (active_list[type] == NULL) active_list[type] = entry; else /* make the entry first in the list */ { entry->next = active_list[type]; active_list[type]->prev = entry; active_list[type] = entry; } } return (entry->refcnt); } /* * Remove active list entry from the list and free it. * * This function presumes it is called with lock protecting the active list * held. */ void pk11_active_remove(PK11_active *entry, PK11_OPTYPE type) { PK11_active *prev_entry; /* remove the entry from the list and free it */ if ((prev_entry = entry->prev) != NULL) { prev_entry->next = entry->next; if (entry->next != NULL) entry->next->prev = prev_entry; } else { active_list[type] = entry->next; /* we were the first but not the only one */ if (entry->next != NULL) entry->next->prev = NULL; } /* sanitization */ entry->h = CK_INVALID_HANDLE; entry->prev = NULL; entry->next = NULL; OPENSSL_free(entry); } /* Free all entries from the active list. */ void pk11_free_active_list(PK11_OPTYPE type) { PK11_active *entry; /* only for asymmetric types since only they have C_Find* locks. */ switch (type) { case OP_RSA: case OP_DSA: case OP_DH: break; default: return; } /* see find_lock array definition for more info on object locking */ LOCK_OBJSTORE(type); while ((entry = active_list[type]) != NULL) pk11_active_remove(entry, type); UNLOCK_OBJSTORE(type); } /* * Search for active list entry associated with given PKCS#11 object handle, * decrement its refcnt and if it drops to 0, disconnect the entry and free it. * * Return 1 if the PKCS#11 object associated with the entry has no references, * return 0 if there is at least one reference, -1 on error. * * This function presumes it is called with lock protecting the active list * held. */ int pk11_active_delete(CK_OBJECT_HANDLE h, PK11_OPTYPE type) { PK11_active *entry = NULL; if ((entry = pk11_active_find(h, type)) == NULL) { PK11err(PK11_F_ACTIVE_DELETE, PK11_R_INVALID_HANDLE); return (-1); } OPENSSL_assert(entry->refcnt > 0); entry->refcnt--; if (entry->refcnt == 0) { pk11_active_remove(entry, type); return (1); } return (0); } #ifndef OPENSSL_NO_RSA /* Our internal RSA_METHOD that we provide pointers to */ static RSA_METHOD pk11_rsa = { "PKCS#11 RSA method", pk11_RSA_public_encrypt, /* rsa_pub_encrypt */ pk11_RSA_public_decrypt, /* rsa_pub_decrypt */ pk11_RSA_private_encrypt, /* rsa_priv_encrypt */ pk11_RSA_private_decrypt, /* rsa_priv_decrypt */ NULL, /* rsa_mod_exp */ NULL, /* bn_mod_exp */ pk11_RSA_init, /* init */ pk11_RSA_finish, /* finish */ RSA_FLAG_SIGN_VER, /* flags */ NULL, /* app_data */ pk11_RSA_sign, /* rsa_sign */ pk11_RSA_verify, /* rsa_verify */ /* Internal rsa_keygen will be used if this is NULL. */ NULL /* rsa_keygen */ }; RSA_METHOD * PK11_RSA(void) { return (&pk11_rsa); } #endif #ifndef OPENSSL_NO_DSA /* Our internal DSA_METHOD that we provide pointers to */ static DSA_METHOD pk11_dsa = { "PKCS#11 DSA method", pk11_dsa_do_sign, /* dsa_do_sign */ NULL, /* dsa_sign_setup */ pk11_dsa_do_verify, /* dsa_do_verify */ NULL, /* dsa_mod_exp */ NULL, /* bn_mod_exp */ pk11_DSA_init, /* init */ pk11_DSA_finish, /* finish */ 0, /* flags */ NULL /* app_data */ }; DSA_METHOD * PK11_DSA(void) { return (&pk11_dsa); } #endif #ifndef OPENSSL_NO_DH /* * PKCS #11 V2.20, section 11.2 specifies that the number of bytes needed for * output buffer may somewhat exceed the precise number of bytes needed, but * should not exceed it by a large amount. That may be caused, for example, by * rounding it up to multiple of X in the underlying bignum library. 8 should be * enough. */ #define DH_BUF_RESERVE 8 /* Our internal DH_METHOD that we provide pointers to */ static DH_METHOD pk11_dh = { "PKCS#11 DH method", pk11_DH_generate_key, /* generate_key */ pk11_DH_compute_key, /* compute_key */ NULL, /* bn_mod_exp */ pk11_DH_init, /* init */ pk11_DH_finish, /* finish */ 0, /* flags */ NULL, /* app_data */ NULL /* generate_params */ }; DH_METHOD * PK11_DH(void) { return (&pk11_dh); } #endif /* Size of an SSL signature: MD5+SHA1 */ #define SSL_SIG_LENGTH 36 /* Lengths of DSA data and signature */ #define DSA_DATA_LEN 20 #define DSA_SIGNATURE_LEN 40 #ifndef OPENSSL_NO_RSA /* * Similar to OpenSSL to take advantage of the paddings. The goal is to * support all paddings in this engine although PK11 library does not * support all the paddings used in OpenSSL. * The input errors should have been checked in the padding functions. */ static int pk11_RSA_public_encrypt(int flen, const unsigned char *from, unsigned char *to, RSA *rsa, int padding) { int i, num = 0, r = -1; unsigned char *buf = NULL; num = BN_num_bytes(rsa->n); if ((buf = (unsigned char *)OPENSSL_malloc(num)) == NULL) { PK11err(PK11_F_RSA_PUB_ENC, PK11_R_MALLOC_FAILURE); goto err; } switch (padding) { case RSA_PKCS1_PADDING: i = RSA_padding_add_PKCS1_type_2(buf, num, from, flen); break; #ifndef OPENSSL_NO_SHA case RSA_PKCS1_OAEP_PADDING: i = RSA_padding_add_PKCS1_OAEP(buf, num, from, flen, NULL, 0); break; #endif case RSA_SSLV23_PADDING: i = RSA_padding_add_SSLv23(buf, num, from, flen); break; case RSA_NO_PADDING: i = RSA_padding_add_none(buf, num, from, flen); break; default: PK11err(PK11_F_RSA_PUB_ENC, PK11_R_UNKNOWN_PADDING_TYPE); goto err; } if (i <= 0) goto err; /* PK11 functions are called here */ r = pk11_RSA_public_encrypt_low(num, buf, to, rsa); err: if (buf != NULL) { OPENSSL_cleanse(buf, num); OPENSSL_free(buf); } return (r); } /* * Similar to Openssl to take advantage of the paddings. The input errors * should be caught in the padding functions */ static int pk11_RSA_private_encrypt(int flen, const unsigned char *from, unsigned char *to, RSA *rsa, int padding) { int i, num = 0, r = -1; unsigned char *buf = NULL; num = BN_num_bytes(rsa->n); if ((buf = (unsigned char *)OPENSSL_malloc(num)) == NULL) { PK11err(PK11_F_RSA_PRIV_ENC, PK11_R_MALLOC_FAILURE); goto err; } switch (padding) { case RSA_PKCS1_PADDING: i = RSA_padding_add_PKCS1_type_1(buf, num, from, flen); break; case RSA_NO_PADDING: i = RSA_padding_add_none(buf, num, from, flen); break; case RSA_SSLV23_PADDING: default: PK11err(PK11_F_RSA_PRIV_ENC, PK11_R_UNKNOWN_PADDING_TYPE); goto err; } if (i <= 0) goto err; /* PK11 functions are called here */ r = pk11_RSA_private_encrypt_low(num, buf, to, rsa); err: if (buf != NULL) { OPENSSL_cleanse(buf, num); OPENSSL_free(buf); } return (r); } /* Similar to OpenSSL code. Input errors are also checked here */ static int pk11_RSA_private_decrypt(int flen, const unsigned char *from, unsigned char *to, RSA *rsa, int padding) { BIGNUM f; int j, num = 0, r = -1; unsigned char *p; unsigned char *buf = NULL; BN_init(&f); num = BN_num_bytes(rsa->n); if ((buf = (unsigned char *)OPENSSL_malloc(num)) == NULL) { PK11err(PK11_F_RSA_PRIV_DEC, PK11_R_MALLOC_FAILURE); goto err; } /* * This check was for equality but PGP does evil things * and chops off the top '0' bytes */ if (flen > num) { PK11err(PK11_F_RSA_PRIV_DEC, PK11_R_DATA_GREATER_THAN_MOD_LEN); goto err; } /* make data into a big number */ if (BN_bin2bn(from, (int)flen, &f) == NULL) goto err; if (BN_ucmp(&f, rsa->n) >= 0) { PK11err(PK11_F_RSA_PRIV_DEC, PK11_R_DATA_TOO_LARGE_FOR_MODULUS); goto err; } /* PK11 functions are called here */ r = pk11_RSA_private_decrypt_low(flen, from, buf, rsa); /* * PK11 CKM_RSA_X_509 mechanism pads 0's at the beginning. * Needs to skip these 0's paddings here. */ for (j = 0; j < r; j++) if (buf[j] != 0) break; p = buf + j; j = r - j; /* j is only used with no-padding mode */ switch (padding) { case RSA_PKCS1_PADDING: r = RSA_padding_check_PKCS1_type_2(to, num, p, j, num); break; #ifndef OPENSSL_NO_SHA case RSA_PKCS1_OAEP_PADDING: r = RSA_padding_check_PKCS1_OAEP(to, num, p, j, num, NULL, 0); break; #endif case RSA_SSLV23_PADDING: r = RSA_padding_check_SSLv23(to, num, p, j, num); break; case RSA_NO_PADDING: r = RSA_padding_check_none(to, num, p, j, num); break; default: PK11err(PK11_F_RSA_PRIV_DEC, PK11_R_UNKNOWN_PADDING_TYPE); goto err; } if (r < 0) PK11err(PK11_F_RSA_PRIV_DEC, PK11_R_PADDING_CHECK_FAILED); err: BN_clear_free(&f); if (buf != NULL) { OPENSSL_cleanse(buf, num); OPENSSL_free(buf); } return (r); } /* Similar to OpenSSL code. Input errors are also checked here */ static int pk11_RSA_public_decrypt(int flen, const unsigned char *from, unsigned char *to, RSA *rsa, int padding) { BIGNUM f; int i, num = 0, r = -1; unsigned char *p; unsigned char *buf = NULL; BN_init(&f); num = BN_num_bytes(rsa->n); buf = (unsigned char *)OPENSSL_malloc(num); if (buf == NULL) { PK11err(PK11_F_RSA_PUB_DEC, PK11_R_MALLOC_FAILURE); goto err; } /* * This check was for equality but PGP does evil things * and chops off the top '0' bytes */ if (flen > num) { PK11err(PK11_F_RSA_PUB_DEC, PK11_R_DATA_GREATER_THAN_MOD_LEN); goto err; } if (BN_bin2bn(from, flen, &f) == NULL) goto err; if (BN_ucmp(&f, rsa->n) >= 0) { PK11err(PK11_F_RSA_PUB_DEC, PK11_R_DATA_TOO_LARGE_FOR_MODULUS); goto err; } /* PK11 functions are called here */ r = pk11_RSA_public_decrypt_low(flen, from, buf, rsa); /* * PK11 CKM_RSA_X_509 mechanism pads 0's at the beginning. * Needs to skip these 0's here */ for (i = 0; i < r; i++) if (buf[i] != 0) break; p = buf + i; i = r - i; /* i is only used with no-padding mode */ switch (padding) { case RSA_PKCS1_PADDING: r = RSA_padding_check_PKCS1_type_1(to, num, p, i, num); break; case RSA_NO_PADDING: r = RSA_padding_check_none(to, num, p, i, num); break; default: PK11err(PK11_F_RSA_PUB_DEC, PK11_R_UNKNOWN_PADDING_TYPE); goto err; } if (r < 0) PK11err(PK11_F_RSA_PUB_DEC, PK11_R_PADDING_CHECK_FAILED); err: BN_clear_free(&f); if (buf != NULL) { OPENSSL_cleanse(buf, num); OPENSSL_free(buf); } return (r); } /* * This function implements RSA public encryption using C_EncryptInit and * C_Encrypt pk11 interfaces. Note that the CKM_RSA_X_509 is used here. * The calling function allocated sufficient memory in "to" to store results. */ static int pk11_RSA_public_encrypt_low(int flen, const unsigned char *from, unsigned char *to, RSA *rsa) { CK_ULONG bytes_encrypted = flen; int retval = -1; CK_RV rv; CK_MECHANISM mech_rsa = {CKM_RSA_X_509, NULL, 0}; CK_MECHANISM *p_mech = &mech_rsa; CK_OBJECT_HANDLE h_pub_key = CK_INVALID_HANDLE; PK11_SESSION *sp; if ((sp = pk11_get_session(OP_RSA)) == NULL) return (-1); (void) pk11_check_new_rsa_key_pub(sp, rsa); h_pub_key = sp->opdata_rsa_pub_key; if (h_pub_key == CK_INVALID_HANDLE) h_pub_key = sp->opdata_rsa_pub_key = pk11_get_public_rsa_key(rsa, sp); if (h_pub_key != CK_INVALID_HANDLE) { rv = pFuncList->C_EncryptInit(sp->session, p_mech, h_pub_key); if (rv != CKR_OK) { PK11err_add_data(PK11_F_RSA_PUB_ENC_LOW, PK11_R_ENCRYPTINIT, rv); pk11_return_session(sp, OP_RSA); return (-1); } rv = pFuncList->C_Encrypt(sp->session, (unsigned char *)from, flen, to, &bytes_encrypted); if (rv != CKR_OK) { PK11err_add_data(PK11_F_RSA_PUB_ENC_LOW, PK11_R_ENCRYPT, rv); pk11_return_session(sp, OP_RSA); return (-1); } retval = bytes_encrypted; } pk11_return_session(sp, OP_RSA); return (retval); } /* * This function implements RSA private encryption using C_SignInit and * C_Sign pk11 APIs. Note that CKM_RSA_X_509 is used here. * The calling function allocated sufficient memory in "to" to store results. */ static int pk11_RSA_private_encrypt_low(int flen, const unsigned char *from, unsigned char *to, RSA *rsa) { CK_ULONG ul_sig_len = flen; int retval = -1; CK_RV rv; CK_MECHANISM mech_rsa = {CKM_RSA_X_509, NULL, 0}; CK_MECHANISM *p_mech = &mech_rsa; CK_OBJECT_HANDLE h_priv_key = CK_INVALID_HANDLE; PK11_SESSION *sp; if ((sp = pk11_get_session(OP_RSA)) == NULL) return (-1); (void) pk11_check_new_rsa_key_priv(sp, rsa); h_priv_key = sp->opdata_rsa_priv_key; if (h_priv_key == CK_INVALID_HANDLE) h_priv_key = sp->opdata_rsa_priv_key = pk11_get_private_rsa_key(rsa, sp); if (h_priv_key != CK_INVALID_HANDLE) { rv = pFuncList->C_SignInit(sp->session, p_mech, h_priv_key); if (rv != CKR_OK) { PK11err_add_data(PK11_F_RSA_PRIV_ENC_LOW, PK11_R_SIGNINIT, rv); pk11_return_session(sp, OP_RSA); return (-1); } rv = pFuncList->C_Sign(sp->session, (unsigned char *)from, flen, to, &ul_sig_len); if (rv != CKR_OK) { PK11err_add_data(PK11_F_RSA_PRIV_ENC_LOW, PK11_R_SIGN, rv); pk11_return_session(sp, OP_RSA); return (-1); } retval = ul_sig_len; } pk11_return_session(sp, OP_RSA); return (retval); } /* * This function implements RSA private decryption using C_DecryptInit and * C_Decrypt pk11 APIs. Note that CKM_RSA_X_509 mechanism is used here. * The calling function allocated sufficient memory in "to" to store results. */ static int pk11_RSA_private_decrypt_low(int flen, const unsigned char *from, unsigned char *to, RSA *rsa) { CK_ULONG bytes_decrypted = flen; int retval = -1; CK_RV rv; CK_MECHANISM mech_rsa = {CKM_RSA_X_509, NULL, 0}; CK_MECHANISM *p_mech = &mech_rsa; CK_OBJECT_HANDLE h_priv_key; PK11_SESSION *sp; if ((sp = pk11_get_session(OP_RSA)) == NULL) return (-1); (void) pk11_check_new_rsa_key_priv(sp, rsa); h_priv_key = sp->opdata_rsa_priv_key; if (h_priv_key == CK_INVALID_HANDLE) h_priv_key = sp->opdata_rsa_priv_key = pk11_get_private_rsa_key(rsa, sp); if (h_priv_key != CK_INVALID_HANDLE) { rv = pFuncList->C_DecryptInit(sp->session, p_mech, h_priv_key); if (rv != CKR_OK) { PK11err_add_data(PK11_F_RSA_PRIV_DEC_LOW, PK11_R_DECRYPTINIT, rv); pk11_return_session(sp, OP_RSA); return (-1); } rv = pFuncList->C_Decrypt(sp->session, (unsigned char *)from, flen, to, &bytes_decrypted); if (rv != CKR_OK) { PK11err_add_data(PK11_F_RSA_PRIV_DEC_LOW, PK11_R_DECRYPT, rv); pk11_return_session(sp, OP_RSA); return (-1); } retval = bytes_decrypted; } pk11_return_session(sp, OP_RSA); return (retval); } /* * This function implements RSA public decryption using C_VerifyRecoverInit * and C_VerifyRecover pk11 APIs. Note that CKM_RSA_X_509 is used here. * The calling function allocated sufficient memory in "to" to store results. */ static int pk11_RSA_public_decrypt_low(int flen, const unsigned char *from, unsigned char *to, RSA *rsa) { CK_ULONG bytes_decrypted = flen; int retval = -1; CK_RV rv; CK_MECHANISM mech_rsa = {CKM_RSA_X_509, NULL, 0}; CK_MECHANISM *p_mech = &mech_rsa; CK_OBJECT_HANDLE h_pub_key = CK_INVALID_HANDLE; PK11_SESSION *sp; if ((sp = pk11_get_session(OP_RSA)) == NULL) return (-1); (void) pk11_check_new_rsa_key_pub(sp, rsa); h_pub_key = sp->opdata_rsa_pub_key; if (h_pub_key == CK_INVALID_HANDLE) h_pub_key = sp->opdata_rsa_pub_key = pk11_get_public_rsa_key(rsa, sp); if (h_pub_key != CK_INVALID_HANDLE) { rv = pFuncList->C_VerifyRecoverInit(sp->session, p_mech, h_pub_key); if (rv != CKR_OK) { PK11err_add_data(PK11_F_RSA_PUB_DEC_LOW, PK11_R_VERIFYRECOVERINIT, rv); pk11_return_session(sp, OP_RSA); return (-1); } rv = pFuncList->C_VerifyRecover(sp->session, (unsigned char *)from, flen, to, &bytes_decrypted); if (rv != CKR_OK) { PK11err_add_data(PK11_F_RSA_PUB_DEC_LOW, PK11_R_VERIFYRECOVER, rv); pk11_return_session(sp, OP_RSA); return (-1); } retval = bytes_decrypted; } pk11_return_session(sp, OP_RSA); return (retval); } static int pk11_RSA_init(RSA *rsa) { /* * This flag in the RSA_METHOD enables the new rsa_sign, * rsa_verify functions. See rsa.h for details. */ rsa->flags |= RSA_FLAG_SIGN_VER; return (1); } static int pk11_RSA_finish(RSA *rsa) { /* * Since we are overloading OpenSSL's native RSA_eay_finish() we need * to do the same as in the original function, i.e. to free bignum * structures. */ if (rsa->_method_mod_n != NULL) BN_MONT_CTX_free(rsa->_method_mod_n); if (rsa->_method_mod_p != NULL) BN_MONT_CTX_free(rsa->_method_mod_p); if (rsa->_method_mod_q != NULL) BN_MONT_CTX_free(rsa->_method_mod_q); return (1); } /* * Standard engine interface function. Majority codes here are from * rsa/rsa_sign.c. We replaced the decrypt function call by C_Sign of PKCS#11. * See more details in rsa/rsa_sign.c */ static int pk11_RSA_sign(int type, const unsigned char *m, unsigned int m_len, unsigned char *sigret, unsigned int *siglen, const RSA *rsa) { X509_SIG sig; ASN1_TYPE parameter; int i, j; unsigned char *p, *s = NULL; X509_ALGOR algor; ASN1_OCTET_STRING digest; CK_RV rv; CK_MECHANISM mech_rsa = {CKM_RSA_PKCS, NULL, 0}; CK_MECHANISM *p_mech = &mech_rsa; CK_OBJECT_HANDLE h_priv_key; PK11_SESSION *sp = NULL; int ret = 0; unsigned long ulsiglen; /* Encode the digest */ /* Special case: SSL signature, just check the length */ if (type == NID_md5_sha1) { if (m_len != SSL_SIG_LENGTH) { PK11err(PK11_F_RSA_SIGN, PK11_R_INVALID_MESSAGE_LENGTH); goto err; } i = SSL_SIG_LENGTH; s = (unsigned char *)m; } else { sig.algor = &algor; sig.algor->algorithm = OBJ_nid2obj(type); if (sig.algor->algorithm == NULL) { PK11err(PK11_F_RSA_SIGN, PK11_R_UNKNOWN_ALGORITHM_TYPE); goto err; } if (sig.algor->algorithm->length == 0) { PK11err(PK11_F_RSA_SIGN, PK11_R_UNKNOWN_ASN1_OBJECT_ID); goto err; } parameter.type = V_ASN1_NULL; parameter.value.ptr = NULL; sig.algor->parameter = ¶meter; sig.digest = &digest; sig.digest->data = (unsigned char *)m; sig.digest->length = m_len; i = i2d_X509_SIG(&sig, NULL); } j = RSA_size(rsa); if ((i - RSA_PKCS1_PADDING) > j) { PK11err(PK11_F_RSA_SIGN, PK11_R_DIGEST_TOO_BIG); goto err; } if (type != NID_md5_sha1) { s = (unsigned char *)OPENSSL_malloc((unsigned int)(j + 1)); if (s == NULL) { PK11err(PK11_F_RSA_SIGN, PK11_R_MALLOC_FAILURE); goto err; } p = s; (void) i2d_X509_SIG(&sig, &p); } if ((sp = pk11_get_session(OP_RSA)) == NULL) goto err; (void) pk11_check_new_rsa_key_priv(sp, rsa); h_priv_key = sp->opdata_rsa_priv_key; if (h_priv_key == CK_INVALID_HANDLE) h_priv_key = sp->opdata_rsa_priv_key = pk11_get_private_rsa_key((RSA *)rsa, sp); if (h_priv_key != CK_INVALID_HANDLE) { rv = pFuncList->C_SignInit(sp->session, p_mech, h_priv_key); if (rv != CKR_OK) { PK11err_add_data(PK11_F_RSA_SIGN, PK11_R_SIGNINIT, rv); goto err; } ulsiglen = j; rv = pFuncList->C_Sign(sp->session, s, i, sigret, (CK_ULONG_PTR) &ulsiglen); *siglen = ulsiglen; if (rv != CKR_OK) { PK11err_add_data(PK11_F_RSA_SIGN, PK11_R_SIGN, rv); goto err; } ret = 1; } err: if (type != NID_md5_sha1) { (void) memset(s, 0, (unsigned int)(j + 1)); OPENSSL_free(s); } pk11_return_session(sp, OP_RSA); return (ret); } static int pk11_RSA_verify(int type, const unsigned char *m, unsigned int m_len, const unsigned char *sigbuf, unsigned int siglen, const RSA *rsa) { X509_SIG sig; ASN1_TYPE parameter; int i, j; unsigned char *p, *s = NULL; X509_ALGOR algor; ASN1_OCTET_STRING digest; CK_RV rv; CK_MECHANISM mech_rsa = {CKM_RSA_PKCS, NULL, 0}; CK_MECHANISM *p_mech = &mech_rsa; CK_OBJECT_HANDLE h_pub_key; PK11_SESSION *sp = NULL; int ret = 0; /* Encode the digest */ /* Special case: SSL signature, just check the length */ if (type == NID_md5_sha1) { if (m_len != SSL_SIG_LENGTH) { PK11err(PK11_F_RSA_VERIFY, PK11_R_INVALID_MESSAGE_LENGTH); goto err; } i = SSL_SIG_LENGTH; s = (unsigned char *)m; } else { sig.algor = &algor; sig.algor->algorithm = OBJ_nid2obj(type); if (sig.algor->algorithm == NULL) { PK11err(PK11_F_RSA_VERIFY, PK11_R_UNKNOWN_ALGORITHM_TYPE); goto err; } if (sig.algor->algorithm->length == 0) { PK11err(PK11_F_RSA_VERIFY, PK11_R_UNKNOWN_ASN1_OBJECT_ID); goto err; } parameter.type = V_ASN1_NULL; parameter.value.ptr = NULL; sig.algor->parameter = ¶meter; sig.digest = &digest; sig.digest->data = (unsigned char *)m; sig.digest->length = m_len; i = i2d_X509_SIG(&sig, NULL); } j = RSA_size(rsa); if ((i - RSA_PKCS1_PADDING) > j) { PK11err(PK11_F_RSA_VERIFY, PK11_R_DIGEST_TOO_BIG); goto err; } if (type != NID_md5_sha1) { s = (unsigned char *)OPENSSL_malloc((unsigned int)(j + 1)); if (s == NULL) { PK11err(PK11_F_RSA_VERIFY, PK11_R_MALLOC_FAILURE); goto err; } p = s; (void) i2d_X509_SIG(&sig, &p); } if ((sp = pk11_get_session(OP_RSA)) == NULL) goto err; (void) pk11_check_new_rsa_key_pub(sp, rsa); h_pub_key = sp->opdata_rsa_pub_key; if (h_pub_key == CK_INVALID_HANDLE) h_pub_key = sp->opdata_rsa_pub_key = pk11_get_public_rsa_key((RSA *)rsa, sp); if (h_pub_key != CK_INVALID_HANDLE) { rv = pFuncList->C_VerifyInit(sp->session, p_mech, h_pub_key); if (rv != CKR_OK) { PK11err_add_data(PK11_F_RSA_VERIFY, PK11_R_VERIFYINIT, rv); goto err; } rv = pFuncList->C_Verify(sp->session, s, i, (CK_BYTE_PTR)sigbuf, (CK_ULONG)siglen); if (rv != CKR_OK) { PK11err_add_data(PK11_F_RSA_VERIFY, PK11_R_VERIFY, rv); goto err; } ret = 1; } err: if (type != NID_md5_sha1) { (void) memset(s, 0, (unsigned int)siglen); OPENSSL_free(s); } pk11_return_session(sp, OP_RSA); return (ret); } #define MAXATTR 1024 /* * Load RSA private key from a file or get its PKCS#11 handle if stored in the * PKCS#11 token. */ /* ARGSUSED */ EVP_PKEY *pk11_load_privkey(ENGINE* e, const char *privkey_id, UI_METHOD *ui_method, void *callback_data) { EVP_PKEY *pkey = NULL; FILE *privkey; CK_OBJECT_HANDLE h_priv_key = CK_INVALID_HANDLE; RSA *rsa = NULL; PK11_SESSION *sp; /* Anything else below is needed for the key by reference extension. */ const char *file; int ret; pkcs11_uri uri_struct; CK_RV rv; CK_BBOOL is_token = CK_TRUE; CK_BBOOL rollback = CK_FALSE; CK_BYTE attr_data[8][MAXATTR]; CK_OBJECT_CLASS key_class = CKO_PRIVATE_KEY; CK_OBJECT_HANDLE ks_key = CK_INVALID_HANDLE; /* key in keystore */ /* We look for private keys only. */ CK_ATTRIBUTE search_templ[] = { {CKA_TOKEN, &is_token, sizeof (is_token)}, {CKA_CLASS, &key_class, sizeof (key_class)}, {CKA_LABEL, NULL, 0} }; /* * These public attributes are needed to initialize the OpenSSL RSA * structure with something we can use to look up the key. Note that we * never ask for private components. */ CK_ATTRIBUTE get_templ[] = { {CKA_MODULUS, (void *)attr_data[0], MAXATTR}, /* n */ {CKA_PUBLIC_EXPONENT, (void *)attr_data[1], MAXATTR}, /* e */ }; if ((sp = pk11_get_session(OP_RSA)) == NULL) return (NULL); /* * The next function will decide whether we are going to access keys in * the token or read them from plain files. It all depends on what is in * the 'privkey_id' parameter. */ ret = pk11_process_pkcs11_uri(privkey_id, &uri_struct, &file); if (ret == 0) goto err; /* We will try to access a key from a PKCS#11 token. */ if (ret == 1) { if (pk11_check_token_attrs(&uri_struct) == 0) goto err; search_templ[2].pValue = uri_struct.object; search_templ[2].ulValueLen = strlen(search_templ[2].pValue); if (pk11_token_login(sp->session, &pk11_login_done, &uri_struct, CK_TRUE) == 0) goto err; /* * Now let's try to find the key in the token. It is a failure * if we can't find it. */ if (find_one_object(OP_RSA, sp->session, search_templ, 3, &ks_key) == 0) goto err; /* * Free the structure now. Note that we use uri_struct's field * directly in the template so we cannot free it until the find * is done. */ pk11_free_pkcs11_uri(&uri_struct, 0); /* * We might have a cache hit which we could confirm according to * the 'n'/'e' params, RSA public pointer as NULL, and non-NULL * RSA private pointer. However, it is easier just to recreate * everything. We expect the keys to be loaded once and used * many times. We do not check the return value because even in * case of failure the sp structure will have both key pointer * and object handle cleaned and pk11_destroy_object() reports * the failure to the OpenSSL error message buffer. */ (void) pk11_destroy_rsa_object_priv(sp, CK_TRUE); sp->opdata_rsa_priv_key = ks_key; /* This object shall not be deleted on a cache miss. */ sp->persistent = CK_TRUE; if ((rsa = sp->opdata_rsa_priv = RSA_new_method(e)) == NULL) goto err; if ((rv = pFuncList->C_GetAttributeValue(sp->session, ks_key, get_templ, 2)) != CKR_OK) { PK11err_add_data(PK11_F_LOAD_PRIVKEY, PK11_R_GETATTRIBUTVALUE, rv); goto err; } /* * Cache the RSA private structure pointer. We do not use it now * for key-by-ref keys but let's do it for consistency reasons. */ sp->opdata_rsa_priv = rsa; /* * We do not use pk11_get_private_rsa_key() here so we must take * care of handle management ourselves. */ KEY_HANDLE_REFHOLD(ks_key, OP_RSA, CK_FALSE, rollback, err); /* * Those are the sensitive components we do not want to export * from the token at all: rsa->(d|p|q|dmp1|dmq1|iqmp). */ attr_to_BN(&get_templ[0], attr_data[0], &rsa->n); attr_to_BN(&get_templ[1], attr_data[1], &rsa->e); /* * Must have 'n'/'e' components in the session structure as * well. They serve as a public look-up key for the private key * in the keystore. */ attr_to_BN(&get_templ[0], attr_data[0], &sp->opdata_rsa_n_num); attr_to_BN(&get_templ[1], attr_data[1], &sp->opdata_rsa_e_num); if ((pkey = EVP_PKEY_new()) == NULL) goto err; if (EVP_PKEY_set1_RSA(pkey, rsa) == 0) goto err; } else if ((privkey = fopen(file, read_mode_flags)) != NULL) { pkey = PEM_read_PrivateKey(privkey, NULL, NULL, NULL); (void) fclose(privkey); if (pkey != NULL) { rsa = EVP_PKEY_get1_RSA(pkey); if (rsa != NULL) { (void) pk11_check_new_rsa_key_priv(sp, rsa); h_priv_key = sp->opdata_rsa_priv_key = pk11_get_private_rsa_key(rsa, sp); if (h_priv_key == CK_INVALID_HANDLE) goto err; } else goto err; } } pk11_return_session(sp, OP_RSA); return (pkey); err: if (rsa != NULL) RSA_free(rsa); if (pkey != NULL) { EVP_PKEY_free(pkey); pkey = NULL; } return (pkey); } /* Load RSA public key from a file or load it from the PKCS#11 token. */ /* ARGSUSED */ EVP_PKEY *pk11_load_pubkey(ENGINE* e, const char *pubkey_id, UI_METHOD *ui_method, void *callback_data) { EVP_PKEY *pkey = NULL; FILE *pubkey; CK_OBJECT_HANDLE h_pub_key = CK_INVALID_HANDLE; RSA *rsa = NULL; PK11_SESSION *sp; /* everything else below needed for key by reference extension */ int ret; const char *file; pkcs11_uri uri_struct; CK_RV rv; CK_BBOOL is_token = CK_TRUE; CK_BYTE attr_data[2][MAXATTR]; CK_OBJECT_CLASS key_class = CKO_PUBLIC_KEY; CK_OBJECT_HANDLE ks_key = CK_INVALID_HANDLE; /* key in keystore */ CK_ATTRIBUTE search_templ[] = { {CKA_TOKEN, &is_token, sizeof (is_token)}, {CKA_CLASS, &key_class, sizeof (key_class)}, {CKA_LABEL, NULL, 0} }; /* * These public attributes are needed to initialize OpenSSL RSA * structure with something we can use to look up the key. */ CK_ATTRIBUTE get_templ[] = { {CKA_MODULUS, (void *)attr_data[0], MAXATTR}, /* n */ {CKA_PUBLIC_EXPONENT, (void *)attr_data[1], MAXATTR}, /* e */ }; if ((sp = pk11_get_session(OP_RSA)) == NULL) return (NULL); ret = pk11_process_pkcs11_uri(pubkey_id, &uri_struct, &file); if (ret == 0) goto err; if (ret == 1) { if (pk11_check_token_attrs(&uri_struct) == 0) goto err; search_templ[2].pValue = uri_struct.object; search_templ[2].ulValueLen = strlen(search_templ[2].pValue); if (pk11_token_login(sp->session, &pk11_login_done, &uri_struct, CK_FALSE) == 0) goto err; if (find_one_object(OP_RSA, sp->session, search_templ, 3, &ks_key) == 0) { goto err; } /* * Free the structure now. Note that we use uri_struct's field * directly in the template so we can't free until find is done. */ pk11_free_pkcs11_uri(&uri_struct, 0); /* * We load a new public key so we will create a new RSA * structure. No cache hit is possible. */ (void) pk11_destroy_rsa_object_pub(sp, CK_TRUE); sp->opdata_rsa_pub_key = ks_key; if ((rsa = sp->opdata_rsa_pub = RSA_new_method(e)) == NULL) goto err; if ((rv = pFuncList->C_GetAttributeValue(sp->session, ks_key, get_templ, 2)) != CKR_OK) { PK11err_add_data(PK11_F_LOAD_PUBKEY, PK11_R_GETATTRIBUTVALUE, rv); goto err; } /* * Cache the RSA public structure pointer. */ sp->opdata_rsa_pub = rsa; /* * These are the sensitive components we do not want to export * from the token at all: rsa->(d|p|q|dmp1|dmq1|iqmp). */ attr_to_BN(&get_templ[0], attr_data[0], &rsa->n); attr_to_BN(&get_templ[1], attr_data[1], &rsa->e); if ((pkey = EVP_PKEY_new()) == NULL) goto err; if (EVP_PKEY_set1_RSA(pkey, rsa) == 0) goto err; /* * Create a session object from it so that when calling * pk11_get_public_rsa_key() the next time, we can find it. The * reason why we do that is that we cannot tell from the RSA * structure (OpenSSL RSA structure does not have any room for * additional data used by the engine, for example) if it bears * a public key stored in the keystore or not so it's better if * we always have a session key. Note that this is different * from what we do for the private keystore objects but in that * case, we can tell from the RSA structure that the keystore * object is in play - the 'd' component is NULL in that case. */ h_pub_key = sp->opdata_rsa_pub_key = pk11_get_public_rsa_key(rsa, sp); if (h_pub_key == CK_INVALID_HANDLE) goto err; } else if ((pubkey = fopen(file, read_mode_flags)) != NULL) { pkey = PEM_read_PUBKEY(pubkey, NULL, NULL, NULL); (void) fclose(pubkey); if (pkey != NULL) { rsa = EVP_PKEY_get1_RSA(pkey); if (rsa != NULL) { /* * This will always destroy the RSA * object since we have a new RSA * structure here. */ (void) pk11_check_new_rsa_key_pub(sp, rsa); h_pub_key = sp->opdata_rsa_pub_key = pk11_get_public_rsa_key(rsa, sp); if (h_pub_key == CK_INVALID_HANDLE) { EVP_PKEY_free(pkey); pkey = NULL; } } else { EVP_PKEY_free(pkey); pkey = NULL; } } } pk11_return_session(sp, OP_RSA); return (pkey); err: if (rsa != NULL) RSA_free(rsa); if (pkey != NULL) { EVP_PKEY_free(pkey); pkey = NULL; } return (pkey); } /* * Get a public key object in a session from a given rsa structure. If the * PKCS#11 session object already exists it is found, reused, and * the counter in the active object list incremented. If not found, a new * session object is created and put also onto the active object list. * * We use the session field from sp, and we cache rsa->(n|e) in * opdata_rsa_(n|e|d)_num, respectively. */ static CK_OBJECT_HANDLE pk11_get_public_rsa_key(RSA* rsa, PK11_SESSION *sp) { CK_RV rv; CK_OBJECT_HANDLE h_key = CK_INVALID_HANDLE; CK_ULONG found; CK_OBJECT_CLASS o_key = CKO_PUBLIC_KEY; CK_KEY_TYPE k_type = CKK_RSA; CK_ULONG ul_key_attr_count = 7; CK_BBOOL rollback = CK_FALSE; CK_ATTRIBUTE a_key_template[] = { {CKA_CLASS, (void *) NULL, sizeof (CK_OBJECT_CLASS)}, {CKA_KEY_TYPE, (void *) NULL, sizeof (CK_KEY_TYPE)}, {CKA_TOKEN, &pk11_false, sizeof (pk11_false)}, {CKA_ENCRYPT, &pk11_true, sizeof (pk11_true)}, {CKA_VERIFY_RECOVER, &pk11_true, sizeof (pk11_true)}, {CKA_MODULUS, (void *)NULL, 0}, {CKA_PUBLIC_EXPONENT, (void *)NULL, 0} }; int i; a_key_template[0].pValue = &o_key; a_key_template[1].pValue = &k_type; a_key_template[5].ulValueLen = BN_num_bytes(rsa->n); a_key_template[5].pValue = (CK_VOID_PTR)OPENSSL_malloc( (size_t)a_key_template[5].ulValueLen); if (a_key_template[5].pValue == NULL) { PK11err(PK11_F_GET_PUB_RSA_KEY, PK11_R_MALLOC_FAILURE); goto malloc_err; } BN_bn2bin(rsa->n, a_key_template[5].pValue); a_key_template[6].ulValueLen = BN_num_bytes(rsa->e); a_key_template[6].pValue = (CK_VOID_PTR)OPENSSL_malloc( (size_t)a_key_template[6].ulValueLen); if (a_key_template[6].pValue == NULL) { PK11err(PK11_F_GET_PUB_RSA_KEY, PK11_R_MALLOC_FAILURE); goto malloc_err; } BN_bn2bin(rsa->e, a_key_template[6].pValue); /* see find_lock array definition for more info on object locking */ LOCK_OBJSTORE(OP_RSA); rv = pFuncList->C_FindObjectsInit(sp->session, a_key_template, ul_key_attr_count); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_PUB_RSA_KEY, PK11_R_FINDOBJECTSINIT, rv); goto err; } rv = pFuncList->C_FindObjects(sp->session, &h_key, 1, &found); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_PUB_RSA_KEY, PK11_R_FINDOBJECTS, rv); goto err; } rv = pFuncList->C_FindObjectsFinal(sp->session); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_PUB_RSA_KEY, PK11_R_FINDOBJECTSFINAL, rv); goto err; } if (found == 0) { rv = pFuncList->C_CreateObject(sp->session, a_key_template, ul_key_attr_count, &h_key); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_PUB_RSA_KEY, PK11_R_CREATEOBJECT, rv); goto err; } } if ((sp->opdata_rsa_n_num = BN_dup(rsa->n)) == NULL) { PK11err(PK11_F_GET_PUB_RSA_KEY, PK11_R_MALLOC_FAILURE); rollback = CK_TRUE; goto err; } if ((sp->opdata_rsa_e_num = BN_dup(rsa->e)) == NULL) { PK11err(PK11_F_GET_PUB_RSA_KEY, PK11_R_MALLOC_FAILURE); BN_free(sp->opdata_rsa_n_num); sp->opdata_rsa_n_num = NULL; rollback = CK_TRUE; goto err; } /* LINTED: E_CONSTANT_CONDITION */ KEY_HANDLE_REFHOLD(h_key, OP_RSA, CK_FALSE, rollback, err); sp->opdata_rsa_pub = rsa; err: if (rollback) { /* * We do not care about the return value from C_DestroyObject() * since we are doing rollback. */ if (found == 0) (void) pFuncList->C_DestroyObject(sp->session, h_key); h_key = CK_INVALID_HANDLE; } UNLOCK_OBJSTORE(OP_RSA); malloc_err: for (i = 5; i <= 6; i++) { if (a_key_template[i].pValue != NULL) { OPENSSL_free(a_key_template[i].pValue); a_key_template[i].pValue = NULL; } } return (h_key); } /* * Function similar to pk11_get_public_rsa_key(). In addition to 'n' and 'e' * components, it also caches 'd' if present. Note that if RSA keys by reference * are used, 'd' is never extracted from the token in which case it would be * NULL here. */ static CK_OBJECT_HANDLE pk11_get_private_rsa_key(RSA* rsa, PK11_SESSION *sp) { CK_RV rv; CK_OBJECT_HANDLE h_key = CK_INVALID_HANDLE; int i; CK_ULONG found; CK_OBJECT_CLASS o_key = CKO_PRIVATE_KEY; CK_KEY_TYPE k_type = CKK_RSA; CK_ULONG ul_key_attr_count = 14; CK_BBOOL rollback = CK_FALSE; /* * Both CKA_TOKEN and CKA_SENSITIVE have to be CK_FALSE for session keys */ CK_ATTRIBUTE a_key_template[] = { {CKA_CLASS, (void *) NULL, sizeof (CK_OBJECT_CLASS)}, {CKA_KEY_TYPE, (void *) NULL, sizeof (CK_KEY_TYPE)}, {CKA_TOKEN, &pk11_false, sizeof (pk11_false)}, {CKA_SENSITIVE, &pk11_false, sizeof (pk11_false)}, {CKA_DECRYPT, &pk11_true, sizeof (pk11_true)}, {CKA_SIGN, &pk11_true, sizeof (pk11_true)}, {CKA_MODULUS, (void *)NULL, 0}, {CKA_PUBLIC_EXPONENT, (void *)NULL, 0}, {CKA_PRIVATE_EXPONENT, (void *)NULL, 0}, {CKA_PRIME_1, (void *)NULL, 0}, {CKA_PRIME_2, (void *)NULL, 0}, {CKA_EXPONENT_1, (void *)NULL, 0}, {CKA_EXPONENT_2, (void *)NULL, 0}, {CKA_COEFFICIENT, (void *)NULL, 0}, }; a_key_template[0].pValue = &o_key; a_key_template[1].pValue = &k_type; /* Put the private key components into the template */ if (init_template_value(rsa->n, &a_key_template[6].pValue, &a_key_template[6].ulValueLen) == 0 || init_template_value(rsa->e, &a_key_template[7].pValue, &a_key_template[7].ulValueLen) == 0 || init_template_value(rsa->d, &a_key_template[8].pValue, &a_key_template[8].ulValueLen) == 0 || init_template_value(rsa->p, &a_key_template[9].pValue, &a_key_template[9].ulValueLen) == 0 || init_template_value(rsa->q, &a_key_template[10].pValue, &a_key_template[10].ulValueLen) == 0 || init_template_value(rsa->dmp1, &a_key_template[11].pValue, &a_key_template[11].ulValueLen) == 0 || init_template_value(rsa->dmq1, &a_key_template[12].pValue, &a_key_template[12].ulValueLen) == 0 || init_template_value(rsa->iqmp, &a_key_template[13].pValue, &a_key_template[13].ulValueLen) == 0) { PK11err(PK11_F_GET_PRIV_RSA_KEY, PK11_R_MALLOC_FAILURE); goto malloc_err; } /* see find_lock array definition for more info on object locking */ LOCK_OBJSTORE(OP_RSA); /* * We are getting the private key but the private 'd' component is NULL. * That means this is key by reference RSA key. In that case, we can * use only public components for searching for the private key handle. */ if (rsa->d == NULL) { ul_key_attr_count = 8; /* * We will perform the search in the token, not in the existing * session keys. */ a_key_template[2].pValue = &pk11_true; } rv = pFuncList->C_FindObjectsInit(sp->session, a_key_template, ul_key_attr_count); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_PRIV_RSA_KEY, PK11_R_FINDOBJECTSINIT, rv); goto err; } rv = pFuncList->C_FindObjects(sp->session, &h_key, 1, &found); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_PRIV_RSA_KEY, PK11_R_FINDOBJECTS, rv); goto err; } rv = pFuncList->C_FindObjectsFinal(sp->session); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_PRIV_RSA_KEY, PK11_R_FINDOBJECTSFINAL, rv); goto err; } if (found == 0) { /* * We have an RSA structure with 'n'/'e' components only so we * tried to find the private key in the keystore. If it was * really a token key we have a problem. Note that for other key * types we just create a new session key using the private * components from the RSA structure. */ if (rsa->d == NULL) { PK11err(PK11_F_GET_PRIV_RSA_KEY, PK11_R_PRIV_KEY_NOT_FOUND); goto err; } rv = pFuncList->C_CreateObject(sp->session, a_key_template, ul_key_attr_count, &h_key); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_PRIV_RSA_KEY, PK11_R_CREATEOBJECT, rv); goto err; } } /* * When RSA keys by reference code is used, we never extract private * components from the keystore. In that case 'd' was set to NULL and we * expect the application to properly cope with that. It is documented * in openssl(5). In general, if keys by reference are used we expect it * to be used exclusively using the high level API and then there is no * problem. If the application expects the private components to be read * from the keystore then that is not a supported way of usage. */ if (rsa->d != NULL) { if ((sp->opdata_rsa_d_num = BN_dup(rsa->d)) == NULL) { PK11err(PK11_F_GET_PRIV_RSA_KEY, PK11_R_MALLOC_FAILURE); rollback = CK_TRUE; goto err; } } else sp->opdata_rsa_d_num = NULL; /* * For the key by reference code, we need public components as well * since 'd' component is always NULL. For that reason, we always cache * 'n'/'e' components as well. */ if ((sp->opdata_rsa_n_num = BN_dup(rsa->n)) == NULL) { PK11err(PK11_F_GET_PUB_RSA_KEY, PK11_R_MALLOC_FAILURE); sp->opdata_rsa_n_num = NULL; rollback = CK_TRUE; goto err; } if ((sp->opdata_rsa_e_num = BN_dup(rsa->e)) == NULL) { PK11err(PK11_F_GET_PUB_RSA_KEY, PK11_R_MALLOC_FAILURE); BN_free(sp->opdata_rsa_n_num); sp->opdata_rsa_n_num = NULL; rollback = CK_TRUE; goto err; } /* LINTED: E_CONSTANT_CONDITION */ KEY_HANDLE_REFHOLD(h_key, OP_RSA, CK_FALSE, rollback, err); sp->opdata_rsa_priv = rsa; err: if (rollback) { /* * We do not care about the return value from C_DestroyObject() * since we are doing rollback. */ if (found == 0) (void) pFuncList->C_DestroyObject(sp->session, h_key); h_key = CK_INVALID_HANDLE; } UNLOCK_OBJSTORE(OP_RSA); malloc_err: /* * 6 to 13 entries in the key template are key components. * They need to be freed upon exit or error. */ for (i = 6; i <= 13; i++) { if (a_key_template[i].pValue != NULL) { (void) memset(a_key_template[i].pValue, 0, a_key_template[i].ulValueLen); OPENSSL_free(a_key_template[i].pValue); a_key_template[i].pValue = NULL; } } return (h_key); } /* * Check for cache miss. Objects are cleaned only if we have a full cache miss, * meaning that it's a different RSA key pair. Return 1 for cache hit, 0 for * cache miss. */ static int pk11_check_new_rsa_key_pub(PK11_SESSION *sp, const RSA *rsa) { /* * Provide protection against RSA structure reuse by making the * check for cache hit stronger. Only public components of RSA * key matter here so it is sufficient to compare them with values * cached in PK11_SESSION structure. * * We must check the handle as well since with key by reference, public * components 'n'/'e' are cached in private keys as well. That means we * could have a cache hit in a private key when looking for a public * key. That would not work, you cannot have one PKCS#11 object for * both data signing and verifying. */ if (sp->opdata_rsa_pub == rsa && BN_cmp(sp->opdata_rsa_n_num, rsa->n) == 0 && BN_cmp(sp->opdata_rsa_e_num, rsa->e) == 0) { if (sp->opdata_rsa_pub_key != CK_INVALID_HANDLE) return (1); else /* * No public key object yet but we have the right RSA * structure with potentially existing private key * object. We can just create a public object and move * on with this session structure. */ return (0); } /* * A different RSA key pair was using this session structure previously * or it's an empty structure. Destroy what we can. */ (void) pk11_destroy_rsa_object_pub(sp, CK_TRUE); (void) pk11_destroy_rsa_object_priv(sp, CK_TRUE); return (0); } /* * Check for cache miss. Objects are cleaned only if we have a full cache miss, * meaning that it's a different RSA key pair. Return 1 for cache hit, 0 for * cache miss. */ static int pk11_check_new_rsa_key_priv(PK11_SESSION *sp, const RSA *rsa) { /* * Provide protection against RSA structure reuse by making the * check for cache hit stronger. Comparing public exponent of RSA * key with value cached in PK11_SESSION structure should * be sufficient. Note that we want to compare the public component * since with the keys by reference mechanism, private components are * not in the RSA structure. Also, see pk11_check_new_rsa_key_pub() * about why we compare the handle as well. */ if (sp->opdata_rsa_priv == rsa && BN_cmp(sp->opdata_rsa_n_num, rsa->n) == 0 && BN_cmp(sp->opdata_rsa_e_num, rsa->e) == 0) { if (sp->opdata_rsa_priv_key != CK_INVALID_HANDLE) return (1); else /* * No private key object yet but we have the right RSA * structure with potentially existing public key * object. We can just create a private object and move * on with this session structure. */ return (0); } /* * A different RSA key pair was using this session structure previously * or it's an empty structure. Destroy what we can. */ (void) pk11_destroy_rsa_object_priv(sp, CK_TRUE); (void) pk11_destroy_rsa_object_pub(sp, CK_TRUE); return (0); } #endif #ifndef OPENSSL_NO_DSA /* The DSA function implementation */ /* ARGSUSED */ static int pk11_DSA_init(DSA *dsa) { return (1); } /* ARGSUSED */ static int pk11_DSA_finish(DSA *dsa) { return (1); } static DSA_SIG * pk11_dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa) { BIGNUM *r = NULL, *s = NULL; int i; DSA_SIG *dsa_sig = NULL; CK_RV rv; CK_MECHANISM Mechanism_dsa = {CKM_DSA, NULL, 0}; CK_MECHANISM *p_mech = &Mechanism_dsa; CK_OBJECT_HANDLE h_priv_key; /* * The signature is the concatenation of r and s, * each is 20 bytes long */ unsigned char sigret[DSA_SIGNATURE_LEN]; unsigned long siglen = DSA_SIGNATURE_LEN; unsigned int siglen2 = DSA_SIGNATURE_LEN / 2; PK11_SESSION *sp = NULL; if ((dsa->p == NULL) || (dsa->q == NULL) || (dsa->g == NULL)) { PK11err(PK11_F_DSA_SIGN, PK11_R_MISSING_KEY_COMPONENT); goto ret; } i = BN_num_bytes(dsa->q); /* should be 20 */ if (dlen > i) { PK11err(PK11_F_DSA_SIGN, PK11_R_INVALID_SIGNATURE_LENGTH); goto ret; } if ((sp = pk11_get_session(OP_DSA)) == NULL) goto ret; (void) check_new_dsa_key_priv(sp, dsa); h_priv_key = sp->opdata_dsa_priv_key; if (h_priv_key == CK_INVALID_HANDLE) h_priv_key = sp->opdata_dsa_priv_key = pk11_get_private_dsa_key((DSA *)dsa, &sp->opdata_dsa_priv, &sp->opdata_dsa_priv_num, sp->session); if (h_priv_key != CK_INVALID_HANDLE) { rv = pFuncList->C_SignInit(sp->session, p_mech, h_priv_key); if (rv != CKR_OK) { PK11err_add_data(PK11_F_DSA_SIGN, PK11_R_SIGNINIT, rv); goto ret; } (void) memset(sigret, 0, siglen); rv = pFuncList->C_Sign(sp->session, (unsigned char *) dgst, dlen, sigret, (CK_ULONG_PTR) &siglen); if (rv != CKR_OK) { PK11err_add_data(PK11_F_DSA_SIGN, PK11_R_SIGN, rv); goto ret; } } if ((s = BN_new()) == NULL) { PK11err(PK11_F_DSA_SIGN, PK11_R_MALLOC_FAILURE); goto ret; } if ((r = BN_new()) == NULL) { PK11err(PK11_F_DSA_SIGN, PK11_R_MALLOC_FAILURE); goto ret; } if ((dsa_sig = DSA_SIG_new()) == NULL) { PK11err(PK11_F_DSA_SIGN, PK11_R_MALLOC_FAILURE); goto ret; } if (BN_bin2bn(sigret, siglen2, r) == NULL || BN_bin2bn(&sigret[siglen2], siglen2, s) == NULL) { PK11err(PK11_F_DSA_SIGN, PK11_R_MALLOC_FAILURE); goto ret; } dsa_sig->r = r; dsa_sig->s = s; ret: if (dsa_sig == NULL) { if (r != NULL) BN_free(r); if (s != NULL) BN_free(s); } pk11_return_session(sp, OP_DSA); return (dsa_sig); } static int pk11_dsa_do_verify(const unsigned char *dgst, int dlen, DSA_SIG *sig, DSA *dsa) { int i; CK_RV rv; int retval = 0; CK_MECHANISM Mechanism_dsa = {CKM_DSA, NULL, 0}; CK_MECHANISM *p_mech = &Mechanism_dsa; CK_OBJECT_HANDLE h_pub_key; unsigned char sigbuf[DSA_SIGNATURE_LEN]; unsigned long siglen = DSA_SIGNATURE_LEN; unsigned long siglen2 = DSA_SIGNATURE_LEN/2; PK11_SESSION *sp = NULL; if (BN_is_zero(sig->r) || sig->r->neg || BN_ucmp(sig->r, dsa->q) >= 0) { PK11err(PK11_F_DSA_VERIFY, PK11_R_INVALID_DSA_SIGNATURE_R); goto ret; } if (BN_is_zero(sig->s) || sig->s->neg || BN_ucmp(sig->s, dsa->q) >= 0) { PK11err(PK11_F_DSA_VERIFY, PK11_R_INVALID_DSA_SIGNATURE_S); goto ret; } i = BN_num_bytes(dsa->q); /* should be 20 */ if (dlen > i) { PK11err(PK11_F_DSA_VERIFY, PK11_R_INVALID_SIGNATURE_LENGTH); goto ret; } if ((sp = pk11_get_session(OP_DSA)) == NULL) goto ret; (void) check_new_dsa_key_pub(sp, dsa); h_pub_key = sp->opdata_dsa_pub_key; if (h_pub_key == CK_INVALID_HANDLE) h_pub_key = sp->opdata_dsa_pub_key = pk11_get_public_dsa_key((DSA *)dsa, &sp->opdata_dsa_pub, &sp->opdata_dsa_pub_num, sp->session); if (h_pub_key != CK_INVALID_HANDLE) { rv = pFuncList->C_VerifyInit(sp->session, p_mech, h_pub_key); if (rv != CKR_OK) { PK11err_add_data(PK11_F_DSA_VERIFY, PK11_R_VERIFYINIT, rv); goto ret; } /* * The representation of each of the two big numbers could * be shorter than DSA_SIGNATURE_LEN/2 bytes so we need * to act accordingly and shift if necessary. */ (void) memset(sigbuf, 0, siglen); BN_bn2bin(sig->r, sigbuf + siglen2 - BN_num_bytes(sig->r)); BN_bn2bin(sig->s, &sigbuf[siglen2] + siglen2 - BN_num_bytes(sig->s)); rv = pFuncList->C_Verify(sp->session, (unsigned char *) dgst, dlen, sigbuf, (CK_ULONG)siglen); if (rv != CKR_OK) { PK11err_add_data(PK11_F_DSA_VERIFY, PK11_R_VERIFY, rv); goto ret; } } retval = 1; ret: pk11_return_session(sp, OP_DSA); return (retval); } /* * Create a public key object in a session from a given dsa structure. * The *dsa_pub_num pointer is non-NULL for DSA public keys. */ static CK_OBJECT_HANDLE pk11_get_public_dsa_key(DSA* dsa, DSA **key_ptr, BIGNUM **dsa_pub_num, CK_SESSION_HANDLE session) { CK_RV rv; CK_OBJECT_CLASS o_key = CKO_PUBLIC_KEY; CK_OBJECT_HANDLE h_key = CK_INVALID_HANDLE; CK_ULONG found; CK_KEY_TYPE k_type = CKK_DSA; CK_ULONG ul_key_attr_count = 8; CK_BBOOL rollback = CK_FALSE; int i; CK_ATTRIBUTE a_key_template[] = { {CKA_CLASS, (void *) NULL, sizeof (CK_OBJECT_CLASS)}, {CKA_KEY_TYPE, (void *) NULL, sizeof (CK_KEY_TYPE)}, {CKA_TOKEN, &pk11_false, sizeof (pk11_false)}, {CKA_VERIFY, &pk11_true, sizeof (pk11_true)}, {CKA_PRIME, (void *)NULL, 0}, /* p */ {CKA_SUBPRIME, (void *)NULL, 0}, /* q */ {CKA_BASE, (void *)NULL, 0}, /* g */ {CKA_VALUE, (void *)NULL, 0} /* pub_key - y */ }; a_key_template[0].pValue = &o_key; a_key_template[1].pValue = &k_type; if (init_template_value(dsa->p, &a_key_template[4].pValue, &a_key_template[4].ulValueLen) == 0 || init_template_value(dsa->q, &a_key_template[5].pValue, &a_key_template[5].ulValueLen) == 0 || init_template_value(dsa->g, &a_key_template[6].pValue, &a_key_template[6].ulValueLen) == 0 || init_template_value(dsa->pub_key, &a_key_template[7].pValue, &a_key_template[7].ulValueLen) == 0) { PK11err(PK11_F_GET_PUB_DSA_KEY, PK11_R_MALLOC_FAILURE); goto malloc_err; } /* see find_lock array definition for more info on object locking */ LOCK_OBJSTORE(OP_DSA); rv = pFuncList->C_FindObjectsInit(session, a_key_template, ul_key_attr_count); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_PUB_DSA_KEY, PK11_R_FINDOBJECTSINIT, rv); goto err; } rv = pFuncList->C_FindObjects(session, &h_key, 1, &found); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_PUB_DSA_KEY, PK11_R_FINDOBJECTS, rv); goto err; } rv = pFuncList->C_FindObjectsFinal(session); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_PUB_DSA_KEY, PK11_R_FINDOBJECTSFINAL, rv); goto err; } if (found == 0) { rv = pFuncList->C_CreateObject(session, a_key_template, ul_key_attr_count, &h_key); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_PUB_DSA_KEY, PK11_R_CREATEOBJECT, rv); goto err; } } if (dsa_pub_num != NULL) if ((*dsa_pub_num = BN_dup(dsa->pub_key)) == NULL) { PK11err(PK11_F_GET_PUB_DSA_KEY, PK11_R_MALLOC_FAILURE); rollback = CK_TRUE; goto err; } /* LINTED: E_CONSTANT_CONDITION */ KEY_HANDLE_REFHOLD(h_key, OP_DSA, CK_FALSE, rollback, err); if (key_ptr != NULL) *key_ptr = dsa; err: if (rollback) { /* * We do not care about the return value from C_DestroyObject() * since we are doing rollback. */ if (found == 0) (void) pFuncList->C_DestroyObject(session, h_key); h_key = CK_INVALID_HANDLE; } UNLOCK_OBJSTORE(OP_DSA); malloc_err: for (i = 4; i <= 7; i++) { if (a_key_template[i].pValue != NULL) { OPENSSL_free(a_key_template[i].pValue); a_key_template[i].pValue = NULL; } } return (h_key); } /* * Create a private key object in the session from a given dsa structure * The *dsa_priv_num pointer is non-NULL for DSA private keys. */ static CK_OBJECT_HANDLE pk11_get_private_dsa_key(DSA* dsa, DSA **key_ptr, BIGNUM **dsa_priv_num, CK_SESSION_HANDLE session) { CK_RV rv; CK_OBJECT_HANDLE h_key = CK_INVALID_HANDLE; CK_OBJECT_CLASS o_key = CKO_PRIVATE_KEY; int i; CK_ULONG found; CK_KEY_TYPE k_type = CKK_DSA; CK_ULONG ul_key_attr_count = 9; CK_BBOOL rollback = CK_FALSE; /* * Both CKA_TOKEN and CKA_SENSITIVE have to be CK_FALSE for session keys */ CK_ATTRIBUTE a_key_template[] = { {CKA_CLASS, (void *) NULL, sizeof (CK_OBJECT_CLASS)}, {CKA_KEY_TYPE, (void *) NULL, sizeof (CK_KEY_TYPE)}, {CKA_TOKEN, &pk11_false, sizeof (pk11_false)}, {CKA_SENSITIVE, &pk11_false, sizeof (pk11_false)}, {CKA_SIGN, &pk11_true, sizeof (pk11_true)}, {CKA_PRIME, (void *)NULL, 0}, /* p */ {CKA_SUBPRIME, (void *)NULL, 0}, /* q */ {CKA_BASE, (void *)NULL, 0}, /* g */ {CKA_VALUE, (void *)NULL, 0} /* priv_key - x */ }; a_key_template[0].pValue = &o_key; a_key_template[1].pValue = &k_type; /* Put the private key components into the template */ if (init_template_value(dsa->p, &a_key_template[5].pValue, &a_key_template[5].ulValueLen) == 0 || init_template_value(dsa->q, &a_key_template[6].pValue, &a_key_template[6].ulValueLen) == 0 || init_template_value(dsa->g, &a_key_template[7].pValue, &a_key_template[7].ulValueLen) == 0 || init_template_value(dsa->priv_key, &a_key_template[8].pValue, &a_key_template[8].ulValueLen) == 0) { PK11err(PK11_F_GET_PRIV_DSA_KEY, PK11_R_MALLOC_FAILURE); goto malloc_err; } /* see find_lock array definition for more info on object locking */ LOCK_OBJSTORE(OP_DSA); rv = pFuncList->C_FindObjectsInit(session, a_key_template, ul_key_attr_count); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_PRIV_DSA_KEY, PK11_R_FINDOBJECTSINIT, rv); goto err; } rv = pFuncList->C_FindObjects(session, &h_key, 1, &found); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_PRIV_DSA_KEY, PK11_R_FINDOBJECTS, rv); goto err; } rv = pFuncList->C_FindObjectsFinal(session); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_PRIV_DSA_KEY, PK11_R_FINDOBJECTSFINAL, rv); goto err; } if (found == 0) { rv = pFuncList->C_CreateObject(session, a_key_template, ul_key_attr_count, &h_key); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_PRIV_DSA_KEY, PK11_R_CREATEOBJECT, rv); goto err; } } if (dsa_priv_num != NULL) if ((*dsa_priv_num = BN_dup(dsa->priv_key)) == NULL) { PK11err(PK11_F_GET_PRIV_DSA_KEY, PK11_R_MALLOC_FAILURE); rollback = CK_TRUE; goto err; } /* LINTED: E_CONSTANT_CONDITION */ KEY_HANDLE_REFHOLD(h_key, OP_DSA, CK_FALSE, rollback, err); if (key_ptr != NULL) *key_ptr = dsa; err: if (rollback) { /* * We do not care about the return value from C_DestroyObject() * since we are doing rollback. */ if (found == 0) (void) pFuncList->C_DestroyObject(session, h_key); h_key = CK_INVALID_HANDLE; } UNLOCK_OBJSTORE(OP_DSA); malloc_err: /* * 5 to 8 entries in the key template are key components. * They need to be freed apon exit or error. */ for (i = 5; i <= 8; i++) { if (a_key_template[i].pValue != NULL) { (void) memset(a_key_template[i].pValue, 0, a_key_template[i].ulValueLen); OPENSSL_free(a_key_template[i].pValue); a_key_template[i].pValue = NULL; } } return (h_key); } /* * Check for cache miss and clean the object pointer and handle * in such case. Return 1 for cache hit, 0 for cache miss. */ static int check_new_dsa_key_pub(PK11_SESSION *sp, DSA *dsa) { /* * Provide protection against DSA structure reuse by making the * check for cache hit stronger. Only public key component of DSA * key matters here so it is sufficient to compare it with value * cached in PK11_SESSION structure. */ if ((sp->opdata_dsa_pub != dsa) || (BN_cmp(sp->opdata_dsa_pub_num, dsa->pub_key) != 0)) { /* * We do not check the return value because even in case of * failure the sp structure will have both key pointer * and object handle cleaned and pk11_destroy_object() * reports the failure to the OpenSSL error message buffer. */ (void) pk11_destroy_dsa_object_pub(sp, CK_TRUE); return (0); } return (1); } /* * Check for cache miss and clean the object pointer and handle * in such case. Return 1 for cache hit, 0 for cache miss. */ static int check_new_dsa_key_priv(PK11_SESSION *sp, DSA *dsa) { /* * Provide protection against DSA structure reuse by making the * check for cache hit stronger. Only private key component of DSA * key matters here so it is sufficient to compare it with value * cached in PK11_SESSION structure. */ if ((sp->opdata_dsa_priv != dsa) || (BN_cmp(sp->opdata_dsa_priv_num, dsa->priv_key) != 0)) { /* * We do not check the return value because even in case of * failure the sp structure will have both key pointer * and object handle cleaned and pk11_destroy_object() * reports the failure to the OpenSSL error message buffer. */ (void) pk11_destroy_dsa_object_priv(sp, CK_TRUE); return (0); } return (1); } #endif #ifndef OPENSSL_NO_DH /* The DH function implementation */ /* ARGSUSED */ static int pk11_DH_init(DH *dh) { return (1); } /* ARGSUSED */ static int pk11_DH_finish(DH *dh) { return (1); } /* * Generate DH key-pair. * * Warning: Unlike OpenSSL's DH_generate_key(3) we ignore dh->priv_key * and override it even if it is set. OpenSSL does not touch dh->priv_key * if set and just computes dh->pub_key. It looks like PKCS#11 standard * is not capable of providing this functionality. This could be a problem * for applications relying on OpenSSL's semantics. */ static int pk11_DH_generate_key(DH *dh) { CK_ULONG i; CK_RV rv, rv1; int reuse_mem_len = 0, ret = 0; PK11_SESSION *sp = NULL; CK_BYTE_PTR reuse_mem; CK_MECHANISM mechanism = {CKM_DH_PKCS_KEY_PAIR_GEN, NULL_PTR, 0}; CK_OBJECT_HANDLE h_pub_key = CK_INVALID_HANDLE; CK_OBJECT_HANDLE h_priv_key = CK_INVALID_HANDLE; CK_ULONG ul_pub_key_attr_count = 3; CK_ATTRIBUTE pub_key_template[] = { {CKA_PRIVATE, &pk11_false, sizeof (pk11_false)}, {CKA_PRIME, (void *)NULL, 0}, {CKA_BASE, (void *)NULL, 0} }; CK_ULONG ul_priv_key_attr_count = 3; CK_ATTRIBUTE priv_key_template[] = { {CKA_PRIVATE, &pk11_false, sizeof (pk11_false)}, {CKA_SENSITIVE, &pk11_false, sizeof (pk11_false)}, {CKA_DERIVE, &pk11_true, sizeof (pk11_true)} }; CK_ULONG pub_key_attr_result_count = 1; CK_ATTRIBUTE pub_key_result[] = { {CKA_VALUE, (void *)NULL, 0} }; CK_ULONG priv_key_attr_result_count = 1; CK_ATTRIBUTE priv_key_result[] = { {CKA_VALUE, (void *)NULL, 0} }; pub_key_template[1].ulValueLen = BN_num_bytes(dh->p); if (pub_key_template[1].ulValueLen > 0) { /* * We must not increase ulValueLen by DH_BUF_RESERVE since that * could cause the same rounding problem. See definition of * DH_BUF_RESERVE above. */ pub_key_template[1].pValue = OPENSSL_malloc(pub_key_template[1].ulValueLen + DH_BUF_RESERVE); if (pub_key_template[1].pValue == NULL) { PK11err(PK11_F_DH_GEN_KEY, PK11_R_MALLOC_FAILURE); goto err; } i = BN_bn2bin(dh->p, pub_key_template[1].pValue); } else goto err; pub_key_template[2].ulValueLen = BN_num_bytes(dh->g); if (pub_key_template[2].ulValueLen > 0) { pub_key_template[2].pValue = OPENSSL_malloc(pub_key_template[2].ulValueLen + DH_BUF_RESERVE); if (pub_key_template[2].pValue == NULL) { PK11err(PK11_F_DH_GEN_KEY, PK11_R_MALLOC_FAILURE); goto err; } i = BN_bn2bin(dh->g, pub_key_template[2].pValue); } else goto err; /* * Note: we are only using PK11_SESSION structure for getting * a session handle. The objects created in this function are * destroyed before return and thus not cached. */ if ((sp = pk11_get_session(OP_DH)) == NULL) goto err; rv = pFuncList->C_GenerateKeyPair(sp->session, &mechanism, pub_key_template, ul_pub_key_attr_count, priv_key_template, ul_priv_key_attr_count, &h_pub_key, &h_priv_key); if (rv != CKR_OK) { PK11err_add_data(PK11_F_DH_GEN_KEY, PK11_R_GEN_KEY, rv); goto err; } /* * Reuse the larger memory allocated. We know the larger memory * should be sufficient for reuse. */ if (pub_key_template[1].ulValueLen > pub_key_template[2].ulValueLen) { reuse_mem = pub_key_template[1].pValue; reuse_mem_len = pub_key_template[1].ulValueLen + DH_BUF_RESERVE; } else { reuse_mem = pub_key_template[2].pValue; reuse_mem_len = pub_key_template[2].ulValueLen + DH_BUF_RESERVE; } rv = pFuncList->C_GetAttributeValue(sp->session, h_pub_key, pub_key_result, pub_key_attr_result_count); rv1 = pFuncList->C_GetAttributeValue(sp->session, h_priv_key, priv_key_result, priv_key_attr_result_count); if (rv != CKR_OK || rv1 != CKR_OK) { rv = (rv != CKR_OK) ? rv : rv1; PK11err_add_data(PK11_F_DH_GEN_KEY, PK11_R_GETATTRIBUTVALUE, rv); goto err; } if (((CK_LONG) pub_key_result[0].ulValueLen) <= 0 || ((CK_LONG) priv_key_result[0].ulValueLen) <= 0) { PK11err(PK11_F_DH_GEN_KEY, PK11_R_GETATTRIBUTVALUE); goto err; } /* Reuse the memory allocated */ pub_key_result[0].pValue = reuse_mem; pub_key_result[0].ulValueLen = reuse_mem_len; rv = pFuncList->C_GetAttributeValue(sp->session, h_pub_key, pub_key_result, pub_key_attr_result_count); if (rv != CKR_OK) { PK11err_add_data(PK11_F_DH_GEN_KEY, PK11_R_GETATTRIBUTVALUE, rv); goto err; } if (pub_key_result[0].type == CKA_VALUE) { if (dh->pub_key == NULL) if ((dh->pub_key = BN_new()) == NULL) { PK11err(PK11_F_DH_GEN_KEY, PK11_R_MALLOC_FAILURE); goto err; } dh->pub_key = BN_bin2bn(pub_key_result[0].pValue, pub_key_result[0].ulValueLen, dh->pub_key); if (dh->pub_key == NULL) { PK11err(PK11_F_DH_GEN_KEY, PK11_R_MALLOC_FAILURE); goto err; } } /* Reuse the memory allocated */ priv_key_result[0].pValue = reuse_mem; priv_key_result[0].ulValueLen = reuse_mem_len; rv = pFuncList->C_GetAttributeValue(sp->session, h_priv_key, priv_key_result, priv_key_attr_result_count); if (rv != CKR_OK) { PK11err_add_data(PK11_F_DH_GEN_KEY, PK11_R_GETATTRIBUTVALUE, rv); goto err; } if (priv_key_result[0].type == CKA_VALUE) { if (dh->priv_key == NULL) if ((dh->priv_key = BN_new()) == NULL) { PK11err(PK11_F_DH_GEN_KEY, PK11_R_MALLOC_FAILURE); goto err; } dh->priv_key = BN_bin2bn(priv_key_result[0].pValue, priv_key_result[0].ulValueLen, dh->priv_key); if (dh->priv_key == NULL) { PK11err(PK11_F_DH_GEN_KEY, PK11_R_MALLOC_FAILURE); goto err; } } ret = 1; err: if (h_pub_key != CK_INVALID_HANDLE) { rv = pFuncList->C_DestroyObject(sp->session, h_pub_key); if (rv != CKR_OK) { PK11err_add_data(PK11_F_DH_GEN_KEY, PK11_R_DESTROYOBJECT, rv); } } if (h_priv_key != CK_INVALID_HANDLE) { rv = pFuncList->C_DestroyObject(sp->session, h_priv_key); if (rv != CKR_OK) { PK11err_add_data(PK11_F_DH_GEN_KEY, PK11_R_DESTROYOBJECT, rv); } } for (i = 1; i <= 2; i++) { if (pub_key_template[i].pValue != NULL) { OPENSSL_free(pub_key_template[i].pValue); pub_key_template[i].pValue = NULL; } } pk11_return_session(sp, OP_DH); return (ret); } static int pk11_DH_compute_key(unsigned char *key, const BIGNUM *pub_key, DH *dh) { int i; CK_MECHANISM mechanism = {CKM_DH_PKCS_DERIVE, NULL_PTR, 0}; CK_OBJECT_CLASS key_class = CKO_SECRET_KEY; CK_KEY_TYPE key_type = CKK_GENERIC_SECRET; CK_OBJECT_HANDLE h_derived_key = CK_INVALID_HANDLE; CK_OBJECT_HANDLE h_key = CK_INVALID_HANDLE; CK_ULONG ul_priv_key_attr_count = 2; CK_ATTRIBUTE priv_key_template[] = { {CKA_CLASS, (void*) NULL, sizeof (key_class)}, {CKA_KEY_TYPE, (void*) NULL, sizeof (key_type)}, }; CK_ULONG priv_key_attr_result_count = 1; CK_ATTRIBUTE priv_key_result[] = { {CKA_VALUE, (void *)NULL, 0} }; CK_RV rv; int ret = -1; PK11_SESSION *sp = NULL; if (dh->priv_key == NULL) goto err; priv_key_template[0].pValue = &key_class; priv_key_template[1].pValue = &key_type; if ((sp = pk11_get_session(OP_DH)) == NULL) goto err; mechanism.ulParameterLen = BN_num_bytes(pub_key); mechanism.pParameter = OPENSSL_malloc(mechanism.ulParameterLen); if (mechanism.pParameter == NULL) { PK11err(PK11_F_DH_COMP_KEY, PK11_R_MALLOC_FAILURE); goto err; } BN_bn2bin(pub_key, mechanism.pParameter); (void) check_new_dh_key(sp, dh); h_key = sp->opdata_dh_key; if (h_key == CK_INVALID_HANDLE) h_key = sp->opdata_dh_key = pk11_get_dh_key((DH*) dh, &sp->opdata_dh, &sp->opdata_dh_priv_num, sp->session); if (h_key == CK_INVALID_HANDLE) { PK11err(PK11_F_DH_COMP_KEY, PK11_R_CREATEOBJECT); goto err; } rv = pFuncList->C_DeriveKey(sp->session, &mechanism, h_key, priv_key_template, ul_priv_key_attr_count, &h_derived_key); if (rv != CKR_OK) { PK11err_add_data(PK11_F_DH_COMP_KEY, PK11_R_DERIVEKEY, rv); goto err; } rv = pFuncList->C_GetAttributeValue(sp->session, h_derived_key, priv_key_result, priv_key_attr_result_count); if (rv != CKR_OK) { PK11err_add_data(PK11_F_DH_COMP_KEY, PK11_R_GETATTRIBUTVALUE, rv); goto err; } if (((CK_LONG) priv_key_result[0].ulValueLen) <= 0) { PK11err(PK11_F_DH_COMP_KEY, PK11_R_GETATTRIBUTVALUE); goto err; } priv_key_result[0].pValue = OPENSSL_malloc(priv_key_result[0].ulValueLen); if (!priv_key_result[0].pValue) { PK11err(PK11_F_DH_COMP_KEY, PK11_R_MALLOC_FAILURE); goto err; } rv = pFuncList->C_GetAttributeValue(sp->session, h_derived_key, priv_key_result, priv_key_attr_result_count); if (rv != CKR_OK) { PK11err_add_data(PK11_F_DH_COMP_KEY, PK11_R_GETATTRIBUTVALUE, rv); goto err; } /* * OpenSSL allocates the output buffer 'key' which is the same * length of the public key. It is long enough for the derived key */ if (priv_key_result[0].type == CKA_VALUE) { /* * CKM_DH_PKCS_DERIVE mechanism is not supposed to strip * leading zeros from a computed shared secret. However, * OpenSSL always did it so we must do the same here. The * vagueness of the spec regarding leading zero bytes was * finally cleared with TLS 1.1 (RFC 4346) saying that leading * zeros are stripped before the computed data is used as the * pre-master secret. */ for (i = 0; i < priv_key_result[0].ulValueLen; ++i) { if (((char *)priv_key_result[0].pValue)[i] != 0) break; } (void) memcpy(key, ((char *)priv_key_result[0].pValue) + i, priv_key_result[0].ulValueLen - i); ret = priv_key_result[0].ulValueLen - i; } err: if (h_derived_key != CK_INVALID_HANDLE) { rv = pFuncList->C_DestroyObject(sp->session, h_derived_key); if (rv != CKR_OK) { PK11err_add_data(PK11_F_DH_COMP_KEY, PK11_R_DESTROYOBJECT, rv); } } if (priv_key_result[0].pValue) { OPENSSL_free(priv_key_result[0].pValue); priv_key_result[0].pValue = NULL; } if (mechanism.pParameter) { OPENSSL_free(mechanism.pParameter); mechanism.pParameter = NULL; } pk11_return_session(sp, OP_DH); return (ret); } static CK_OBJECT_HANDLE pk11_get_dh_key(DH* dh, DH **key_ptr, BIGNUM **dh_priv_num, CK_SESSION_HANDLE session) { CK_RV rv; CK_OBJECT_HANDLE h_key = CK_INVALID_HANDLE; CK_OBJECT_CLASS class = CKO_PRIVATE_KEY; CK_KEY_TYPE key_type = CKK_DH; CK_ULONG found; CK_BBOOL rollback = CK_FALSE; int i; CK_ULONG ul_key_attr_count = 7; CK_ATTRIBUTE key_template[] = { {CKA_CLASS, (void*) NULL, sizeof (class)}, {CKA_KEY_TYPE, (void*) NULL, sizeof (key_type)}, {CKA_DERIVE, &pk11_true, sizeof (pk11_true)}, {CKA_PRIVATE, &pk11_false, sizeof (pk11_false)}, {CKA_PRIME, (void *) NULL, 0}, {CKA_BASE, (void *) NULL, 0}, {CKA_VALUE, (void *) NULL, 0}, }; key_template[0].pValue = &class; key_template[1].pValue = &key_type; key_template[4].ulValueLen = BN_num_bytes(dh->p); key_template[4].pValue = (CK_VOID_PTR)OPENSSL_malloc( (size_t)key_template[4].ulValueLen); if (key_template[4].pValue == NULL) { PK11err(PK11_F_GET_DH_KEY, PK11_R_MALLOC_FAILURE); goto malloc_err; } BN_bn2bin(dh->p, key_template[4].pValue); key_template[5].ulValueLen = BN_num_bytes(dh->g); key_template[5].pValue = (CK_VOID_PTR)OPENSSL_malloc( (size_t)key_template[5].ulValueLen); if (key_template[5].pValue == NULL) { PK11err(PK11_F_GET_DH_KEY, PK11_R_MALLOC_FAILURE); goto malloc_err; } BN_bn2bin(dh->g, key_template[5].pValue); key_template[6].ulValueLen = BN_num_bytes(dh->priv_key); key_template[6].pValue = (CK_VOID_PTR)OPENSSL_malloc( (size_t)key_template[6].ulValueLen); if (key_template[6].pValue == NULL) { PK11err(PK11_F_GET_DH_KEY, PK11_R_MALLOC_FAILURE); goto malloc_err; } BN_bn2bin(dh->priv_key, key_template[6].pValue); /* see find_lock array definition for more info on object locking */ LOCK_OBJSTORE(OP_DH); rv = pFuncList->C_FindObjectsInit(session, key_template, ul_key_attr_count); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_DH_KEY, PK11_R_FINDOBJECTSINIT, rv); goto err; } rv = pFuncList->C_FindObjects(session, &h_key, 1, &found); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_DH_KEY, PK11_R_FINDOBJECTS, rv); goto err; } rv = pFuncList->C_FindObjectsFinal(session); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_DH_KEY, PK11_R_FINDOBJECTSFINAL, rv); goto err; } if (found == 0) { rv = pFuncList->C_CreateObject(session, key_template, ul_key_attr_count, &h_key); if (rv != CKR_OK) { PK11err_add_data(PK11_F_GET_DH_KEY, PK11_R_CREATEOBJECT, rv); goto err; } } if (dh_priv_num != NULL) if ((*dh_priv_num = BN_dup(dh->priv_key)) == NULL) { PK11err(PK11_F_GET_DH_KEY, PK11_R_MALLOC_FAILURE); rollback = CK_TRUE; goto err; } /* LINTED: E_CONSTANT_CONDITION */ KEY_HANDLE_REFHOLD(h_key, OP_DH, CK_FALSE, rollback, err); if (key_ptr != NULL) *key_ptr = dh; err: if (rollback) { /* * We do not care about the return value from C_DestroyObject() * since we are doing rollback. */ if (found == 0) (void) pFuncList->C_DestroyObject(session, h_key); h_key = CK_INVALID_HANDLE; } UNLOCK_OBJSTORE(OP_DH); malloc_err: for (i = 4; i <= 6; i++) { if (key_template[i].pValue != NULL) { OPENSSL_free(key_template[i].pValue); key_template[i].pValue = NULL; } } return (h_key); } /* * Check for cache miss and clean the object pointer and handle * in such case. Return 1 for cache hit, 0 for cache miss. * * Note: we rely on pk11_destroy_dh_key_objects() to set sp->opdata_dh * to CK_INVALID_HANDLE even when it fails to destroy the object. */ static int check_new_dh_key(PK11_SESSION *sp, DH *dh) { /* * Provide protection against DH structure reuse by making the * check for cache hit stronger. Private key component of DH key * is unique so it is sufficient to compare it with value cached * in PK11_SESSION structure. */ if ((sp->opdata_dh != dh) || (BN_cmp(sp->opdata_dh_priv_num, dh->priv_key) != 0)) { /* * We do not check the return value because even in case of * failure the sp structure will have both key pointer * and object handle cleaned and pk11_destroy_object() * reports the failure to the OpenSSL error message buffer. */ (void) pk11_destroy_dh_object(sp, CK_TRUE); return (0); } return (1); } #endif /* * Local function to simplify key template population * Return 0 -- error, 1 -- no error */ static int init_template_value(BIGNUM *bn, CK_VOID_PTR *p_value, CK_ULONG *ul_value_len) { CK_ULONG len; /* * This function can be used on non-initialized BIGNUMs. It is easier to * check that here than individually in the callers. */ if (bn != NULL) len = BN_num_bytes(bn); if (bn == NULL || len == 0) return (1); *ul_value_len = len; *p_value = (CK_VOID_PTR)OPENSSL_malloc((size_t)*ul_value_len); if (*p_value == NULL) return (0); BN_bn2bin(bn, *p_value); return (1); } static void attr_to_BN(CK_ATTRIBUTE_PTR attr, CK_BYTE attr_data[], BIGNUM **bn) { if (attr->ulValueLen > 0) *bn = BN_bin2bn(attr_data, attr->ulValueLen, NULL); } /* * Find one object in the token. It is an error if we can not find the object or * if we find more objects based on the template we got. * * Returns: * 1 OK * 0 no object or more than 1 object found */ static int find_one_object(PK11_OPTYPE op, CK_SESSION_HANDLE s, CK_ATTRIBUTE_PTR ptempl, CK_ULONG nattr, CK_OBJECT_HANDLE_PTR pkey) { CK_RV rv; CK_ULONG objcnt; LOCK_OBJSTORE(op); if ((rv = pFuncList->C_FindObjectsInit(s, ptempl, nattr)) != CKR_OK) { PK11err_add_data(PK11_F_FIND_ONE_OBJECT, PK11_R_FINDOBJECTSINIT, rv); goto err; } rv = pFuncList->C_FindObjects(s, pkey, 1, &objcnt); if (rv != CKR_OK) { PK11err_add_data(PK11_F_FIND_ONE_OBJECT, PK11_R_FINDOBJECTS, rv); goto err; } if (objcnt > 1) { PK11err(PK11_F_FIND_ONE_OBJECT, PK11_R_MORE_THAN_ONE_OBJECT_FOUND); goto err; } else if (objcnt == 0) { PK11err(PK11_F_FIND_ONE_OBJECT, PK11_R_NO_OBJECT_FOUND); goto err; } (void) pFuncList->C_FindObjectsFinal(s); UNLOCK_OBJSTORE(op); return (1); err: UNLOCK_OBJSTORE(op); return (0); } /* * OpenSSL 1.0.0 introduced ENGINE API for the PKEY EVP functions. Sadly, * "openssl dgst -dss1 ..." now uses a new function EVP_DigestSignInit() which * internally needs a PKEY method for DSA even when in the engine. So, to avoid * a regression when moving from 0.9.8 to 1.0.0, we use an internal OpenSSL * structure for the DSA PKEY methods to make it work. It is a future project to * make it work with HW acceleration. * * Note that at the time of 1.0.0d release there is no documentation as to how * the PKEY EVP functions are to be implemented in an engine. There is only one * engine shipped with 1.0.0d that uses the PKEY EVP methods, the GOST engine. * It was used as an example when fixing the above mentioned regression problem. */ int pk11_engine_pkey_methods(ENGINE *e, EVP_PKEY_METHOD **pmeth, const int **nids, int nid) { if (pmeth == NULL) { *nids = pk11_pkey_meth_nids; return (1); } switch (nid) { case NID_dsa: *pmeth = (EVP_PKEY_METHOD *)EVP_PKEY_meth_find(nid); return (1); } /* Error branch. */ *pmeth = NULL; return (0); } #endif /* OPENSSL_NO_HW_PK11 */ #endif /* OPENSSL_NO_HW */