-- -- Copyright (c) 1999, 2011, Oracle and/or its affiliates. All rights reserved. -- -- U.S. Government Rights - Commercial software. Government users are subject -- to the Sun Microsystems, Inc. standard license agreement and applicable -- provisions of the FAR and its supplements. -- -- -- This distribution may include materials developed by third parties. Sun, -- Sun Microsystems, the Sun logo and Solaris are trademarks or registered -- trademarks of Sun Microsystems, Inc. in the U.S. and other countries. -- -- ------------------------------------------------------- -- Sun Management Center ------------------------------------------------------- HEALTH-MONITOR-SUNMANAGEMENTCENTER-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI OBJECT-GROUP FROM SNMPv2-CONF DisplayString FROM SNMPv2-TC; healthMonitor MODULE-IDENTITY LAST-UPDATED "0009181435Z" ORGANIZATION "Sun Microsystems Inc." CONTACT-INFO " Sun Microsystems Inc. Customer Support Postal: 901 San Antonio Road Palo Alto, CA-94303-4900 USA Tel: 650-960-1300 E-mail: service@sun.com" DESCRIPTION "Health Monitor allows to monitor the overall state of the machine, including the state of the disk, networks, RAM, and so on. This module uses a set of performance rules to determine valid component states." REVISION "9907201505Z" DESCRIPTION "Rev 1.0 20th July 1999 15:05, Initial version Of MIB." REVISION "0009181435Z" DESCRIPTION "Rev 1.1 18th Sep 2000 14:35. Changed the type of mibnode hmDNLCHits and hmDNLCMisses from Integer32 to Unsigned32." ::= { modules 11 } sun OBJECT IDENTIFIER ::= { enterprises 42 } products OBJECT IDENTIFIER ::= { sun 2 } sunsymon OBJECT IDENTIFIER ::= { products 12 } agent OBJECT IDENTIFIER ::= { sunsymon 2 } modules OBJECT IDENTIFIER ::= { agent 2 } hmSwap OBJECT IDENTIFIER ::= { healthMonitor 1 } hmKernelcontention OBJECT IDENTIFIER ::= { healthMonitor 2 } hmNFS OBJECT IDENTIFIER ::= { healthMonitor 3 } hmCPU OBJECT IDENTIFIER ::= { healthMonitor 4 } hmDiskGroup OBJECT-GROUP OBJECTS { hmDiskName, hmDiskAliasName, hmAvgWaitTransactions, hmDiskBusyPcnt, hmAvgDiskSvcTime } STATUS current DESCRIPTION "Disk related statistics." ::= { healthMonitor 5 } hmRAM OBJECT IDENTIFIER ::= { healthMonitor 6 } hmKMEM OBJECT IDENTIFIER ::= { healthMonitor 7 } hmDNLC OBJECT IDENTIFIER ::= { healthMonitor 8 } hmSwapSpaceGroup OBJECT-GROUP OBJECTS { hmAvailableSwapSpace, hmReservedSwapSpace, hmAllocatedSwapSpace, hmUsedSwapSpace } STATUS current DESCRIPTION "Swap space related statistics." ::= { hmSwap 1 } hmAvailableSwapSpace OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total swap space (in 1024 byte blocks) that is currently available for reservation and allocation." ::= { hmSwapSpaceGroup 1 } hmReservedSwapSpace OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of swap space (in 1024 byte blocks) that is not currently allocated, but is claimed by memory mappings for possible future use." ::= { hmSwapSpaceGroup 2 } hmAllocatedSwapSpace OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of swap space (in 1024 byte blocks) currently allocated for use." ::= { hmSwapSpaceGroup 3 } hmUsedSwapSpace OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of swap space (in 1024 byte blocks) that is either allocated or reserved." ::= { hmSwapSpaceGroup 4 } hmMutexGroup OBJECT-GROUP OBJECTS { hmSpinsOnMutexes, hmTotNumOfCPUs } STATUS current DESCRIPTION "Mutex related statistics." ::= { hmKernelcontention 1 } hmSpinsOnMutexes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of spins on mutexes (lock not acquired on first try) for all CPUs." ::= { hmMutexGroup 1 } hmTotNumOfCPUs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of CPUs." ::= { hmMutexGroup 2 } hmNFSClientRPCGroup OBJECT-GROUP OBJECTS { hmTotRPCCalls, hmTotBadRPCCalls, hmTotRPCRetransmissions, hmTotBadRPCReplies, hmTotRPCCallsTimedOut, hmTotNumOfAuthRefresh, hmTotFailedCallsBV, hmTimers, hmTotMemAllocFails, hmTotSendFails } STATUS current DESCRIPTION "Client RPC call-related statistics." ::= { hmNFS 1 } hmTotRPCCalls OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of RPC calls received." ::= { hmNFSClientRPCGroup 1 } hmTotBadRPCCalls OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of calls rejected by the RPC layer." ::= { hmNFSClientRPCGroup 2 } hmTotRPCRetransmissions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of calls retransmitted due to a timeout." ::= { hmNFSClientRPCGroup 3 } hmTotBadRPCReplies OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of replies from server that do not correspond to any outside call." ::= { hmNFSClientRPCGroup 4 } hmTotRPCCallsTimedOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls timed out while waiting for a reply from server." ::= { hmNFSClientRPCGroup 5 } hmTotNumOfAuthRefresh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times authentication information was refreshed." ::= { hmNFSClientRPCGroup 6 } hmTotFailedCallsBV OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls failed due to a bad verifier in response." ::= { hmNFSClientRPCGroup 7 } hmTimers OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times calculated time-out exceeds minimum specified timeout value for a call." ::= { hmNFSClientRPCGroup 8 } hmTotMemAllocFails OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of failures to allocate memory." ::= { hmNFSClientRPCGroup 9 } hmTotSendFails OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of failures where client is not able to send the packets for any reason." ::= { hmNFSClientRPCGroup 10 } hmCPUProcInStatesGroup OBJECT-GROUP OBJECTS { hmTotProcInRunQueue, hmTotProcBlocked, hmTotProcReadyInSwap } STATUS current DESCRIPTION "Statistics related to the number of processes in different states." ::= { hmCPU 1 } hmTotProcInRunQueue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of processes in the run queue." ::= { hmCPUProcInStatesGroup 1 } hmTotProcBlocked OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of processes blocked for resources." ::= { hmCPUProcInStatesGroup 2 } hmTotProcReadyInSwap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of processes runnable but swapped." ::= { hmCPUProcInStatesGroup 3 } hmDiskTable OBJECT-TYPE SYNTAX SEQUENCE OF HmDiskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information for all the disks installed on the system." ::= { hmDiskGroup 1 } hmDiskEntry OBJECT-TYPE SYNTAX HmDiskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Monitoring information for one disk on the system." INDEX { hmDiskName } ::= { hmDiskTable 1 } HmDiskEntry ::= SEQUENCE { hmDiskName DisplayString, hmDiskAliasName DisplayString, hmAvgWaitTransactions DisplayString, hmDiskBusyPcnt DisplayString, hmAvgDiskSvcTime DisplayString } hmDiskName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the disk." ::= { hmDiskEntry 1 } hmDiskAliasName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the disk alias (for example, c0t0d0)." ::= { hmDiskEntry 2 } hmAvgWaitTransactions OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Average number of transactions waiting for service." ::= { hmDiskEntry 3 } hmDiskBusyPcnt OBJECT-TYPE SYNTAX DisplayString UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of time the disk is busy." ::= { hmDiskEntry 4 } hmAvgDiskSvcTime OBJECT-TYPE SYNTAX DisplayString UNITS "msec" MAX-ACCESS read-only STATUS current DESCRIPTION "Average service time." ::= { hmDiskEntry 5 } hmRamMemoryPagingGroup OBJECT-GROUP OBJECTS { hmHandspread, hmPageScanRate } STATUS current DESCRIPTION "Memory paging-related statistics." ::= { hmRAM 1 } hmHandspread OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "The distance (in pages) between front and back pageout daemon hands. The pageout daemon manages two hands on the clock. The front hand moves through memory, clearing the reference bit, and stealing pages from processes that exceed the value maxrss. The back hand travels behind the front hand, freeing pages that have not been referenced since the front hand passed. If the pages have been modified, they are pushed to the swap space before being freed. After pageout examines a page of memory, the amount of time that is needed to reclaim the page increases as the distance increases between the two hands, and decreases as the scan rate rises." ::= { hmRamMemoryPagingGroup 1 } hmPageScanRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of pages scanned per second." ::= { hmRamMemoryPagingGroup 2 } hmKmemStatisticsGroup OBJECT-GROUP OBJECTS { hmKmemErrors, hmKmemFreeMem } STATUS current DESCRIPTION "Kernel-memory-related statistics." ::= { hmKMEM 1 } hmKmemErrors OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of error occured related to kernel memory. These errors may be.. KMERR_MODIFIED: buffer modified after being fread KMERR_READZONE: readzone violation, write past end of buffer KMERR_BADADDR: invalid free KMERR_DUPFREE: duplicate free KMERR_BADBUFTAG: boundary tag corrupted etc." ::= { hmKmemStatisticsGroup 1 } hmKmemFreeMem OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "Total amount of free kernel memory in MB." ::= { hmKmemStatisticsGroup 2 } hmDNLCStatGroup OBJECT-GROUP OBJECTS { hmDNLCHits, hmDNLCMisses, hmDNLCHitRate, hmDNLCRefRate } STATUS current DESCRIPTION "DNLC related statistics." ::= { hmDNLC 1 } hmDNLCHits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a name is looked up and is found in DNLC (Directory Name Lookup Cache)." ::= { hmDNLCStatGroup 1 } hmDNLCMisses OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a name is looked up and is not found in DNLC (Directory Name Lookup Cache). " ::= { hmDNLCStatGroup 2 } hmDNLCHitRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DNLC hits as a proportion of all DNLC lookups." ::= { hmDNLCStatGroup 3 } hmDNLCRefRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times per second, the DNLC is looked up." ::= { hmDNLCStatGroup 4 } END