INFO: not using any hashes in /data/userland-archives/hashes for fetchmail-6.5.0.tar.bz2 (overridden with --hash) Source /data/userland-archives/fetchmail-6.5.0.tar.bz2... not found, skipping file copy Source https://gitlab.com/fetchmail/fetchmail/-/archive/6.5.0/fetchmail-6.5.0.tar.bz2... downloading... ok validating signature... checking local signature... not found signature validation failed validating hash... ok Please stand by while generating files, this may take a minute or two... autoreconf: export WARNINGS= autoreconf: Entering directory '.' autoreconf: running: autopoint Copying file ABOUT-NLS Copying file config.rpath Creating directory m4 Copying file m4/codeset.m4 Copying file m4/extern-inline.m4 Copying file m4/fcntl-o.m4 Copying file m4/gettext.m4 Copying file m4/glibc2.m4 Copying file m4/glibc21.m4 Copying file m4/iconv.m4 Copying file m4/intdiv0.m4 Copying file m4/intl.m4 Copying file m4/intldir.m4 Copying file m4/intlmacosx.m4 Copying file m4/intmax.m4 Copying file m4/inttypes-pri.m4 Copying file m4/inttypes_h.m4 Copying file m4/lcmessage.m4 Copying file m4/lib-ld.m4 Copying file m4/lib-link.m4 Copying file m4/lib-prefix.m4 Copying file m4/lock.m4 Copying file m4/longlong.m4 Copying file m4/nls.m4 Copying file m4/po.m4 Copying file m4/printf-posix.m4 Copying file m4/progtest.m4 Copying file m4/size_max.m4 Copying file m4/stdint_h.m4 Copying file m4/threadlib.m4 Copying file m4/uintmax_t.m4 Copying file m4/visibility.m4 Copying file m4/wchar_t.m4 Copying file m4/wint_t.m4 Copying file m4/xsize.m4 Copying file po/Makefile.in.in Copying file po/Makevars.template Copying file po/Rules-quot Copying file po/boldquot.sed Copying file po/en@boldquot.header Copying file po/en@quot.header Copying file po/insert-header.sin Copying file po/quot.sed Copying file po/remove-potcdate.sin autoreconf: running: aclocal -I m4 -I m4-local autoreconf: configure.ac: tracing autoreconf: configure.ac: not using Libtool autoreconf: configure.ac: not using Intltool autoreconf: configure.ac: not using Gtkdoc autoreconf: running: /usr/bin/autoconf autoreconf: running: /usr/bin/autoheader autoreconf: running: automake --add-missing --copy --no-force configure.ac:41: installing './ar-lib' configure.ac:34: installing './compile' configure.ac:17: installing './config.guess' configure.ac:17: installing './config.sub' configure.ac:22: installing './install-sh' configure.ac:22: installing './missing' Makefile.am: installing './depcomp' configure.ac: installing './ylwrap' Makefile.am:18: installing './py-compile' parallel-tests: installing './test-driver' autoreconf: Leaving directory '.' You can now run ./configure and make as usual. See INSTALL for details. checking build system type... x86_64-pc-solaris2.11 checking host system type... x86_64-pc-solaris2.11 checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/gmkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking for a Python interpreter with version >= 3.7... python checking for python... /usr/bin/python checking for python version... 3.9 checking for python platform... sunos5 checking for GNU default python prefix... ${prefix} checking for GNU default python exec_prefix... ${exec_prefix} checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.9/site-packages checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.9/site-packages checking whether make supports the include directive... yes (GNU style) checking for gcc... /usr/gcc/13/bin/gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /usr/gcc/13/bin/gcc accepts -g... yes checking for /usr/gcc/13/bin/gcc option to enable C11 features... none needed checking whether /usr/gcc/13/bin/gcc understands -c and -o together... yes checking dependency style of /usr/gcc/13/bin/gcc... gcc3 checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking for gawk... (cached) gawk checking for gcc... (cached) /usr/gcc/13/bin/gcc checking whether the compiler supports GNU C... (cached) yes checking whether /usr/gcc/13/bin/gcc accepts -g... (cached) yes checking for /usr/gcc/13/bin/gcc option to enable C11 features... (cached) none needed checking whether /usr/gcc/13/bin/gcc understands -c and -o together... (cached) yes checking dependency style of /usr/gcc/13/bin/gcc... (cached) gcc3 checking how to run the C preprocessor... /usr/gcc/13/bin/gcc -E checking for ar... ar checking the archiver (ar) interface... ar checking for ranlib... ranlib checking for pkg-config... /usr/bin/amd64/pkg-config checking pkg-config is at least version 0.9.0... yes checking for rst2html5.py... no checking for rst2html5... rst2html5 checking for htmldoc... no checking for ld used by /usr/gcc/13/bin/gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... no checking for shared library run path origin... done checking for a working shell...... /usr/xpg4/bin/sh checking for C/C++ restrict keyword... __restrict__ checking for size_t... yes checking for pid_t... yes checking for uint32_t... yes checking for sys/itimer.h... no checking for sys/fcntl.h... yes checking for sys/filio.h... yes checking for arpa/nameser.h... yes checking for langinfo.h... yes checking for resolv.h... yes checking for /usr/gcc/13/bin/gcc options needed to detect all undeclared functions... none needed checking whether PATH_MAX is declared... yes checking whether h_errno is declared... yes checking for flex... ${SHELL} '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/missing' flex checking for lex output file root... lex.yy checking for lex library... none needed checking whether yytext is a pointer... yes checking whether make sets $(MAKE)... (cached) yes checking for bison... bison -y checking for a sed that does not truncate output... /usr/bin/gsed checking whether NLS is requested... yes checking for msgfmt... /usr/gnu/bin/msgfmt checking for gmsgfmt... /usr/bin/gmsgfmt checking for xgettext... /usr/gnu/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for egrep -e... /usr/bin/ggrep -E checking for 64-bit host... yes checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for socket... no checking for socket in -lsocket... yes checking for socket in -linet... no checking for stpcpy... yes checking for strlcpy... yes checking for strlcat... yes checking for getopt_long... yes checking for vsyslog... yes checking for inet_aton... yes checking for strsignal... yes checking for res_search in libc... not found checking for res_search in -lresolv... found checking sys_siglist declaration in signal.h or unistd.h... no root-mode pid file will go in /var/run checking size of short... 2 checking size of int... 4 checking size of long... 8 checking size of long long... 8 checking if your getaddrinfo is async-signal-safe... yes krb5-config points to kerberosV under /usr configure: Enabling OpenSSL support in /usr/openssl/3.1. configure: SSL-check: trying pkg-config for openssl configure: NOTE: libdir=/usr/lib/amd64 checking for openssl... yes configure: From pkg-config: -L/usr/openssl/3.1/lib/amd64 -lssl -lcrypto configure: derived LDFLAGS: -R/usr/openssl/3.1/lib -R/usr/lib -R/usr/openssl/3.1/lib/amd64 configure: Enabling OpenSSL support. configure: CC: /usr/gcc/13/bin/gcc CPPFLAGS: -I/usr/openssl/3.1/include CFLAGS: -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include LDFLAGS: -R/usr/openssl/3.1/lib -R/usr/lib -R/usr/openssl/3.1/lib/amd64 -m64 -L/usr/openssl/3.1/lib/amd64 LIBS: -L/usr/openssl/3.1/lib -lsocket -lresolv -L/usr/lib -lkrb5 -lssl -lcrypto checking whether LIBRESSL_VERSION_NUMBER is declared... no checking whether TLS1_3_VERSION is declared... yes checking whether TLS1_2_VERSION is declared... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating po/Makefile.in config.status: creating config.h config.status: executing depfiles commands config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile /usr/xpg4/bin/sh /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/ylwrap /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/rcfile_y.y y.tab.c rcfile_y.c y.tab.h `echo rcfile_y.c | sed -e s/cc$/hh/ -e s/cpp$/hpp/ -e s/cxx$/hxx/ -e s/c++$/h++/ -e s/c$/h/` y.output rcfile_y.output -- bison -y -t -d -Wno-yacc updating rcfile_y.h /usr/xpg4/bin/sh /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/ylwrap /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/rcfile_l.l lex.yy.c /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/rcfile_l.c rcfile_l.h /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/rcfile_l.h -- /usr/xpg4/bin/sh '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/missing' flex updating /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/rcfile_l.h /usr/gnu/bin/make all-recursive make[1]: Entering directory '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/amd64' Making all in . make[2]: Entering directory '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/amd64' depbase=`echo socket.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT socket.o -MD -MP -MF $depbase.Tpo -c -o socket.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/socket.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo getpass.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT getpass.o -MD -MP -MF $depbase.Tpo -c -o getpass.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/getpass.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo fetchmail.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT fetchmail.o -MD -MP -MF $depbase.Tpo -c -o fetchmail.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/fetchmail.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo env.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT env.o -MD -MP -MF $depbase.Tpo -c -o env.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/env.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo idle.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT idle.o -MD -MP -MF $depbase.Tpo -c -o idle.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/idle.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo options.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT options.o -MD -MP -MF $depbase.Tpo -c -o options.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/options.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo daemon.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT daemon.o -MD -MP -MF $depbase.Tpo -c -o daemon.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/daemon.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo driver.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT driver.o -MD -MP -MF $depbase.Tpo -c -o driver.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/driver.c &&\ mv -f $depbase.Tpo $depbase.Po /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/driver.c: In function 'kerberos5_auth': /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/driver.c:208:49: warning: implicit declaration of function 'error_message' [-Wimplicit-function-declaration] 208 | report(stderr, "krb5_cc_default: %s\n", error_message(retval)); | ^~~~~~~~~~~~~ depbase=`echo transact.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT transact.o -MD -MP -MF $depbase.Tpo -c -o transact.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/transact.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo sink.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT sink.o -MD -MP -MF $depbase.Tpo -c -o sink.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/sink.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo smtp.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT smtp.o -MD -MP -MF $depbase.Tpo -c -o smtp.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/smtp.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo idlist.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT idlist.o -MD -MP -MF $depbase.Tpo -c -o idlist.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/idlist.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo uid.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT uid.o -MD -MP -MF $depbase.Tpo -c -o uid.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/uid.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo mxget.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT mxget.o -MD -MP -MF $depbase.Tpo -c -o mxget.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/mxget.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo md5ify.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT md5ify.o -MD -MP -MF $depbase.Tpo -c -o md5ify.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/md5ify.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo cram.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT cram.o -MD -MP -MF $depbase.Tpo -c -o cram.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/cram.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo gssapi.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT gssapi.o -MD -MP -MF $depbase.Tpo -c -o gssapi.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/gssapi.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo opie.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT opie.o -MD -MP -MF $depbase.Tpo -c -o opie.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/opie.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo interface.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT interface.o -MD -MP -MF $depbase.Tpo -c -o interface.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/interface.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo netrc.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT netrc.o -MD -MP -MF $depbase.Tpo -c -o netrc.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/netrc.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo unmime.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT unmime.o -MD -MP -MF $depbase.Tpo -c -o unmime.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/unmime.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo conf.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT conf.o -MD -MP -MF $depbase.Tpo -c -o conf.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/conf.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo checkalias.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT checkalias.o -MD -MP -MF $depbase.Tpo -c -o checkalias.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/checkalias.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo uid_db.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT uid_db.o -MD -MP -MF $depbase.Tpo -c -o uid_db.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/uid_db.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo lock.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT lock.o -MD -MP -MF $depbase.Tpo -c -o lock.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/lock.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo rcfile_l.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT rcfile_l.o -MD -MP -MF $depbase.Tpo -c -o rcfile_l.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/rcfile_l.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo rcfile_y.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT rcfile_y.o -MD -MP -MF $depbase.Tpo -c -o rcfile_y.o rcfile_y.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo ucs/norm_charmap.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT ucs/norm_charmap.o -MD -MP -MF $depbase.Tpo -c -o ucs/norm_charmap.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/ucs/norm_charmap.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo fm_realpath.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT fm_realpath.o -MD -MP -MF $depbase.Tpo -c -o fm_realpath.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/fm_realpath.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo pop3.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT pop3.o -MD -MP -MF $depbase.Tpo -c -o pop3.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/pop3.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo imap.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT imap.o -MD -MP -MF $depbase.Tpo -c -o imap.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/imap.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo etrn.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT etrn.o -MD -MP -MF $depbase.Tpo -c -o etrn.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/etrn.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo odmr.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT odmr.o -MD -MP -MF $depbase.Tpo -c -o odmr.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/odmr.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo xmalloc.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT xmalloc.o -MD -MP -MF $depbase.Tpo -c -o xmalloc.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/xmalloc.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo base64.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT base64.o -MD -MP -MF $depbase.Tpo -c -o base64.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/base64.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo rfc822.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT rfc822.o -MD -MP -MF $depbase.Tpo -c -o rfc822.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/rfc822.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo report.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT report.o -MD -MP -MF $depbase.Tpo -c -o report.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/report.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo rfc2047e.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT rfc2047e.o -MD -MP -MF $depbase.Tpo -c -o rfc2047e.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/rfc2047e.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo servport.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT servport.o -MD -MP -MF $depbase.Tpo -c -o servport.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/servport.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo smbdes.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT smbdes.o -MD -MP -MF $depbase.Tpo -c -o smbdes.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/smbdes.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo smbencrypt.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT smbencrypt.o -MD -MP -MF $depbase.Tpo -c -o smbencrypt.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/smbencrypt.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo smbmd4.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT smbmd4.o -MD -MP -MF $depbase.Tpo -c -o smbmd4.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/smbmd4.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo smbutil.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT smbutil.o -MD -MP -MF $depbase.Tpo -c -o smbutil.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/smbutil.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo fm_getaddrinfo.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT fm_getaddrinfo.o -MD -MP -MF $depbase.Tpo -c -o fm_getaddrinfo.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/fm_getaddrinfo.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo starttls.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT starttls.o -MD -MP -MF $depbase.Tpo -c -o starttls.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/starttls.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo rfc822valid.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT rfc822valid.o -MD -MP -MF $depbase.Tpo -c -o rfc822valid.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/rfc822valid.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo sdump.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT sdump.o -MD -MP -MF $depbase.Tpo -c -o sdump.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/sdump.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo x509_name_match.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT x509_name_match.o -MD -MP -MF $depbase.Tpo -c -o x509_name_match.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/x509_name_match.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo md5c.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT md5c.o -MD -MP -MF $depbase.Tpo -c -o md5c.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/md5c.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo tls-aux.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT tls-aux.o -MD -MP -MF $depbase.Tpo -c -o tls-aux.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/tls-aux.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo regex_helper.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT regex_helper.o -MD -MP -MF $depbase.Tpo -c -o regex_helper.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/regex_helper.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo ntlmsubr.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ /usr/gcc/13/bin/gcc -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I. -I/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -I/usr/openssl/3.1/include -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -MT ntlmsubr.o -MD -MP -MF $depbase.Tpo -c -o ntlmsubr.o /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/ntlmsubr.c &&\ mv -f $depbase.Tpo $depbase.Po rm -f libfm.a ar cru libfm.a xmalloc.o base64.o rfc822.o report.o rfc2047e.o servport.o smbdes.o smbencrypt.o smbmd4.o smbutil.o fm_getaddrinfo.o starttls.o rfc822valid.o sdump.o x509_name_match.o md5c.o tls-aux.o regex_helper.o ntlmsubr.o ranlib libfm.a /usr/gcc/13/bin/gcc -m64 -O3 -I/usr/include/kerberosv5 -I/usr/openssl/3.1/include -I/usr/kerberos/include -R/usr/openssl/3.1/lib -R/usr/lib -R/usr/openssl/3.1/lib/amd64 -m64 -L/usr/openssl/3.1/lib/amd64 -o fetchmail socket.o getpass.o fetchmail.o env.o idle.o options.o daemon.o driver.o transact.o sink.o smtp.o idlist.o uid.o mxget.o md5ify.o cram.o gssapi.o opie.o interface.o netrc.o unmime.o conf.o checkalias.o uid_db.o lock.o rcfile_l.o rcfile_y.o ucs/norm_charmap.o fm_realpath.o pop3.o imap.o etrn.o odmr.o libfm.a -L/usr/openssl/3.1/lib -lsocket -lresolv -L/usr/lib -lkrb5 -lssl -lcrypto ( echo '#! /bin/sh' && echo 'exec /usr/bin/python /usr/lib/python3.9/site-packages/fetchmailconf.py "$@"' ) >fetchmailconf && chmod +x fetchmailconf make[2]: Leaving directory '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/amd64' Making all in po make[2]: Entering directory '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/amd64/po' /usr/gnu/bin/make fetchmail.pot-update make[3]: Entering directory '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/amd64/po' sed -e '/^#/d' /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/remove-potcdate.sin > t-remove-potcdate.sed mv t-remove-potcdate.sed remove-potcdate.sed package_gnu=""; \ test -n "$package_gnu" || { \ if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \ LC_ALL=C find -L /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 -maxdepth 1 -type f \ -size -10000000c -exec grep 'GNU fetchmail' \ /dev/null '{}' ';' 2>/dev/null; \ else \ LC_ALL=C grep 'GNU fetchmail' /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/* 2>/dev/null; \ fi; \ } | grep -v 'libtool:' >/dev/null; then \ package_gnu=yes; \ else \ package_gnu=no; \ fi; \ }; \ if test "$package_gnu" = "yes"; then \ package_prefix='GNU '; \ else \ package_prefix=''; \ fi; \ if test -n 'fetchmail-devel@lists.sourceforge.net' || test 'fetchmail-devel@lists.sourceforge.net' = '@'PACKAGE_BUGREPORT'@'; then \ msgid_bugs_address='fetchmail-devel@lists.sourceforge.net'; \ else \ msgid_bugs_address='fetchmail-devel@lists.sourceforge.net'; \ fi; \ case `/usr/gnu/bin/xgettext --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \ /usr/gnu/bin/xgettext --default-domain=fetchmail --directory=/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 \ --add-comments=TRANSLATORS: --keyword=GT_ --keyword=N_ --flag=report:2:c-format --flag=report_build:2:c-format --flag=report_complete:2:c-format --flag=report_at_line:5:c-format --flag=gen_send:2:c-format --flag=gen_transact:2:c-format --flag=stuff_warning:2:c-format \ --files-from=/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/POTFILES.in \ --copyright-holder='Eric S. Raymond' \ --msgid-bugs-address="$msgid_bugs_address" \ ;; \ *) \ /usr/gnu/bin/xgettext --default-domain=fetchmail --directory=/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0 \ --add-comments=TRANSLATORS: --keyword=GT_ --keyword=N_ --flag=report:2:c-format --flag=report_build:2:c-format --flag=report_complete:2:c-format --flag=report_at_line:5:c-format --flag=gen_send:2:c-format --flag=gen_transact:2:c-format --flag=stuff_warning:2:c-format \ --files-from=/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/POTFILES.in \ --copyright-holder='Eric S. Raymond' \ --package-name="${package_prefix}fetchmail" \ --package-version='6.5.0' \ --msgid-bugs-address="$msgid_bugs_address" \ ;; \ esac /usr/gnu/bin/xgettext: warning: file 'rcfile_y.y' extension 'y' is unknown; will try C test ! -f fetchmail.po || { \ if test -f /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/fetchmail.pot-header; then \ sed -e '1,/^#$/d' < fetchmail.po > fetchmail.1po && \ cat /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/fetchmail.pot-header fetchmail.1po > fetchmail.po; \ rm -f fetchmail.1po; \ fi; \ if test -f /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/fetchmail.pot; then \ sed -f remove-potcdate.sed < /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/fetchmail.pot > fetchmail.1po && \ sed -f remove-potcdate.sed < fetchmail.po > fetchmail.2po && \ if cmp fetchmail.1po fetchmail.2po >/dev/null 2>&1; then \ rm -f fetchmail.1po fetchmail.2po fetchmail.po; \ else \ rm -f fetchmail.1po fetchmail.2po /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/fetchmail.pot && \ mv fetchmail.po /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/fetchmail.pot; \ fi; \ else \ mv fetchmail.po /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/fetchmail.pot; \ fi; \ } make[3]: Leaving directory '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/amd64/po' test ! -f /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/fetchmail.pot || \ test -z "/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/cs.gmo /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/de.gmo /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/eo.gmo /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/es.gmo /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/fr.gmo /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/ja.gmo /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/pl.gmo /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/ro.gmo /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/sq.gmo /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/sv.gmo" || /usr/gnu/bin/make /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/cs.gmo /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/de.gmo /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/eo.gmo /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/es.gmo /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/fr.gmo /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/ja.gmo /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/pl.gmo /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/ro.gmo /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/sq.gmo /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/sv.gmo make[3]: Entering directory '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/amd64/po' cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && /usr/bin/msgmerge --update --lang=cs cs.po fetchmail.pot ............................................................................ done. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && rm -f cs.gmo && /usr/bin/gmsgfmt -c --statistics --verbose -o cs.gmo cs.po cs.po: 756 translated messages. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && /usr/bin/msgmerge --update --lang=de de.po fetchmail.pot ............................................................................ done. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && rm -f de.gmo && /usr/bin/gmsgfmt -c --statistics --verbose -o de.gmo de.po de.po: 756 translated messages. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && /usr/bin/msgmerge --update --lang=eo eo.po fetchmail.pot ............................................................................ done. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && rm -f eo.gmo && /usr/bin/gmsgfmt -c --statistics --verbose -o eo.gmo eo.po eo.po: 756 translated messages. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && /usr/bin/msgmerge --update --lang=es es.po fetchmail.pot ............................................................................ done. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && rm -f es.gmo && /usr/bin/gmsgfmt -c --statistics --verbose -o es.gmo es.po es.po: 756 translated messages. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && /usr/bin/msgmerge --update --lang=fr fr.po fetchmail.pot ............................................................................ done. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && rm -f fr.gmo && /usr/bin/gmsgfmt -c --statistics --verbose -o fr.gmo fr.po fr.po: 756 translated messages. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && /usr/bin/msgmerge --update --lang=ja ja.po fetchmail.pot ............................................................................ done. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && rm -f ja.gmo && /usr/bin/gmsgfmt -c --statistics --verbose -o ja.gmo ja.po ja.po: 756 translated messages. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && /usr/bin/msgmerge --update --lang=pl pl.po fetchmail.pot ............................................................................ done. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && rm -f pl.gmo && /usr/bin/gmsgfmt -c --statistics --verbose -o pl.gmo pl.po pl.po: 756 translated messages. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && /usr/bin/msgmerge --update --lang=ro ro.po fetchmail.pot ............................................................................ done. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && rm -f ro.gmo && /usr/bin/gmsgfmt -c --statistics --verbose -o ro.gmo ro.po ro.po: 756 translated messages. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && /usr/bin/msgmerge --update --lang=sq sq.po fetchmail.pot ............................................................................ done. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && rm -f sq.gmo && /usr/bin/gmsgfmt -c --statistics --verbose -o sq.gmo sq.po sq.po: 741 translated messages, 15 untranslated messages. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && /usr/bin/msgmerge --update --lang=sv sv.po fetchmail.pot ............................................................................ done. cd /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po && rm -f sv.gmo && /usr/bin/gmsgfmt -c --statistics --verbose -o sv.gmo sv.po sv.po: 756 translated messages. make[3]: Leaving directory '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/amd64/po' touch stamp-po make[2]: Leaving directory '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/amd64/po' make[1]: Leaving directory '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/amd64' /usr/gnu/bin/make install-recursive make[1]: Entering directory '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/amd64' Making install in . make[2]: Entering directory '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/amd64' make[3]: Entering directory '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/amd64' /usr/bin/gmkdir -p '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/bin' /usr/bin/ginstall -c fetchmail '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/bin' /usr/bin/gmkdir -p '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/bin' /usr/bin/ginstall -c fetchmailconf '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/bin' /usr/bin/gmkdir -p '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/share/man/man1' /usr/bin/ginstall -c -m 644 '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/fetchmail.man' '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/share/man/man1/fetchmail.1' /usr/bin/ginstall -c -m 644 '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/fetchmailconf.man' '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/share/man/man1/fetchmailconf.1' /usr/bin/gmkdir -p '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/lib/python3.9/site-packages' /usr/bin/ginstall -c -m 644 /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/fetchmailconf.py '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/lib/python3.9/site-packages' Byte-compiling python modules... fetchmailconf.py Byte-compiling python modules (optimized versions) ... fetchmailconf.py make[3]: Leaving directory '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/amd64' make[2]: Leaving directory '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/amd64' Making install in po make[2]: Entering directory '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/amd64/po' installing /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/cs.gmo as /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/share/locale/cs/LC_MESSAGES/fetchmail.mo installing /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/de.gmo as /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/share/locale/de/LC_MESSAGES/fetchmail.mo installing /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/eo.gmo as /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/share/locale/eo/LC_MESSAGES/fetchmail.mo installing /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/es.gmo as /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/share/locale/es/LC_MESSAGES/fetchmail.mo installing /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/fr.gmo as /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/share/locale/fr/LC_MESSAGES/fetchmail.mo installing /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/ja.gmo as /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/share/locale/ja/LC_MESSAGES/fetchmail.mo installing /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/pl.gmo as /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/share/locale/pl/LC_MESSAGES/fetchmail.mo installing /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/ro.gmo as /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/share/locale/ro/LC_MESSAGES/fetchmail.mo installing /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/sq.gmo as /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/share/locale/sq/LC_MESSAGES/fetchmail.mo installing /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/sv.gmo as /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/share/locale/sv/LC_MESSAGES/fetchmail.mo if test "fetchmail" = "gettext-tools"; then \ /usr/bin/gmkdir -p /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/ginstall -c -m 644 /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/fetchmail-6.5.0/po/$file \ /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/amd64/po' make[1]: Leaving directory '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/amd64' #!/usr/bin/python3.9 # # A GUI configurator for generating fetchmail configuration files. # by Eric S. Raymond, , # Matthias Andree # Requires Python with Tkinter, and the following OS-dependent services: # posix, posixpath, socket # WARNING: this needs to be updated for fetchmail 6.4's SSL options, # and other recent new options; import sys import time import os import socket import getopt import tempfile import ssl import subprocess try: from tkinter import * from tkinter.dialog import * have_tk=True except: have_tk=False # define a dummy class to inherit from class Frame: pass VERSION = "1.66.0" MIN_PY = (3, 7, 0) if sys.version_info < MIN_PY: sys.exit("fetchmailconf: Python %s.%s.%s or later is required.\n" % MIN_PY) # # Display usage information and pass status argument through to sys.exit() # def usage(status): print(""" Usage: fetchmailconf {[-d] [-f fetchmailrc]|-h|--help|-V|--version} -d - dump configuration (for debugging) -f fmrc - read alternate fetchmailrc file --help, -h - print this help text and quit --version, -V - print fetchmailconf version and quit """) sys.exit(status) # # Define the data structures the GUIs will be tossing around # class Configuration(object): def __init__(self): self.poll_interval = 0 # Normally, run in foreground self.logfile = None # No logfile, initially self.idfile = os.environ["HOME"] + "/.fetchids" # Default idfile, initially self.postmaster = None # No last-resort address, initially self.bouncemail = TRUE # Bounce errors to users self.spambounce = FALSE # Bounce spam errors self.softbounce = TRUE # Treat permanent error as temporary self.properties = None # No exiguous properties self.invisible = FALSE # Suppress Received line & spoof? self.syslog = FALSE # Use syslogd for logging? self.servers = [] # List of included sites Configuration.typemap = ( ('poll_interval', 'Int'), ('logfile', 'String'), ('idfile', 'String'), ('postmaster', 'String'), ('bouncemail', 'Boolean'), ('spambounce', 'Boolean'), ('softbounce', 'Boolean'), ('properties', 'String'), ('syslog', 'Boolean'), ('invisible', 'Boolean')) def __repr__(self): self_repr = "" if self.syslog != ConfigurationDefaults.syslog: self_repr = self_repr + ("set syslog\n") elif self.logfile: self_repr = self_repr + ("set logfile \"%s\"\n" % (self.logfile,)) if self.idfile != ConfigurationDefaults.idfile: self_repr = self_repr + ("set idfile \"%s\"\n" % (self.idfile,)) if self.postmaster != ConfigurationDefaults.postmaster: self_repr = self_repr + ("set postmaster \"%s\"\n" % (self.postmaster,)) if self.bouncemail: self_repr = self_repr + ("set bouncemail\n") else: self_repr = self_repr + ("set nobouncemail\n") if self.spambounce: self_repr = self_repr + ("set spambounce\n") else: self_repr = self_repr + ("set no spambounce\n") if self.softbounce: self_repr = self_repr + ("set softbounce\n") else: self_repr = self_repr + ("set no softbounce\n") if self.properties != ConfigurationDefaults.properties: self_repr = self_repr + ("set properties \"%s\"\n" % (self.properties,)) if self.poll_interval > 0: self_repr = self_repr + "set daemon " + repr(self.poll_interval) + "\n" if self.invisible: self_repr = self_repr + ("set invisible\n") for site in self.servers: self_repr = self_repr + repr(site) return self_repr def __delitem__(self, name): for i in range(len(self.servers)): if self.servers[i].pollname == name: del self.servers[i] break def __str__(self): return "[Configuration: " + repr(self) + "]" class Server(object): def __init__(self): self.pollname = None # Poll label self.via = None # True name of host self.active = TRUE # Poll status self.interval = 0 # Skip interval self.protocol = 'auto' # Default to auto protocol self.service = None # Service name to use self.uidl = FALSE # Don't use RFC1725 UIDLs by default self.auth = 'any' # Default to password authentication self.timeout = 300 # 5-minute timeout self.envelope = 'Received' # Envelope-address header self.envskip = 0 # Number of envelope headers to skip self.qvirtual = None # Name prefix to strip self.aka = [] # List of DNS aka names self.dns = TRUE # Enable DNS lookup on multidrop self.localdomains = [] # Domains to be considered local self.interface = None # IP address and range self.monitor = None # IP address and range self.plugin = None # Plugin command for going to server self.plugout = None # Plugin command for going to listener self.principal = None # Kerberos principal self.esmtpname = None # ESMTP 2554 name self.esmtppassword = None # ESMTP 2554 password self.tracepolls = FALSE # Add trace-poll info to headers self.badheader = FALSE # Pass messages with bad headers on? self.users = [] # List of user entries for site self.idletimeout = 1680 # IDLE timeout (in seconds, see CLIENT_IDLE_TIMEOUT in tunable.h) self.ssldefault = False # this is a helper for autoprobing to initialize user defaults Server.typemap = ( ('pollname', 'String'), ('via', 'String'), ('active', 'Boolean'), ('interval', 'Int'), ('protocol', 'String'), ('service', 'String'), ('uidl', 'Boolean'), ('auth', 'String'), ('timeout', 'Int'), ('envelope', 'String'), ('envskip', 'Int'), ('qvirtual', 'String'), # leave aka out ('dns', 'Boolean'), # leave localdomains out ('interface', 'String'), ('monitor', 'String'), ('plugin', 'String'), ('plugout', 'String'), ('esmtpname', 'String'), ('esmtppassword', 'String'), ('principal', 'String'), ('tracepolls','Boolean'), ('badheader', 'Boolean'), ('ssldefault','Boolean'), ('idletimeout', 'Int')) def dump(self, folded): res = "poll" if self.active else "skip" res += " " + self.pollname if self.via: res = res + (" via " + str(self.via) + "\n") if self.protocol != ServerDefaults.protocol: res = res + " with proto " + self.protocol if self.service and self.protocol and self.service != defaultports[self.protocol] and defaultports[self.protocol] and self.service != ianaservices[defaultports[self.protocol]]: res = res + " service " + self.service if self.timeout != ServerDefaults.timeout: res = res + " timeout " + repr(self.timeout) if self.interval != ServerDefaults.interval: res = res + " interval " + repr(self.interval) if self.envelope != ServerDefaults.envelope or self.envskip != ServerDefaults.envskip: if self.envskip: res = res + " envelope " + repr(self.envskip) + " " + self.envelope else: res = res + " envelope " + self.envelope if self.qvirtual: res = res + (" qvirtual " + str(self.qvirtual) + "\n") if self.auth != ServerDefaults.auth: res = res + " auth " + self.auth if self.dns != ServerDefaults.dns or self.uidl != ServerDefaults.uidl: res = res + " and options" if self.dns != ServerDefaults.dns: res = res + flag2str(self.dns, 'dns') if self.uidl != ServerDefaults.uidl: res = res + flag2str(self.uidl, 'uidl') res += "\n " if folded else " " if self.aka: res = res + "aka " + " ".join(self.aka) if self.aka and self.localdomains: res = res + " " if self.localdomains: res = res + ("localdomains") for x in self.localdomains: res = res + " " + x if self.aka or self.localdomains: if folded: res = res + "\n " else: res = res + " " if self.tracepolls: res = res + "tracepolls\n" if self.interface: res = res + " interface " + str(self.interface) if self.monitor: res = res + " monitor " + str(self.monitor) if self.plugin: res = res + " plugin " + repr(self.plugin) if self.plugout: res = res + " plugout " + repr(self.plugout) if self.principal: res = res + " principal " + repr(self.principal) if self.esmtpname: res = res + " esmtpname " + repr(self.esmtpname) if self.esmtppassword: res = res + " esmtppassword " + repr(self.esmtppassword) if self.interface or self.monitor or self.principal or self.plugin or self.plugout: if folded: res = res + "\n" if self.badheader: res = res + "bad-header accept " if self.idletimeout != ServerDefaults.idletimeout: res = res + " idletimeout " + repr(self.idletimeout) if res[-1] == " ": res = res[0:-1] for i in self.users: res = res + repr(i) res = res + "\n" return res def __delitem__(self, name): for ui in range(len(self.users)): if self.users[ui].remote == name: del self.users[ui] break def __repr__(self): return self.dump(TRUE) def __str__(self): return "[Server: " + self.dump(FALSE) + "]" class User(object): def __init__(self): if "USER" in os.environ: self.remote = os.environ["USER"] # Remote username elif "LOGNAME" in os.environ: self.remote = os.environ["LOGNAME"] else: print("Can't get your username!") sys.exit(1) self.localnames = [self.remote,]# Local names self.password = None # Password for mail account access self.mailboxes = [] # Remote folders to retrieve from self.smtphunt = [] # Hosts to forward to self.fetchdomains = [] # Domains to fetch from self.smtpaddress = None # Append this to MAIL FROM line self.smtpname = None # Use this for RCPT TO self.preconnect = None # Connection setup self.postconnect = None # Connection wrapup self.mda = None # Mail Delivery Agent self.bsmtp = None # BSMTP output file self.lmtp = FALSE # Use LMTP rather than SMTP? self.antispam = "" # Listener's spam-block code self.keep = FALSE # Keep messages self.flush = FALSE # Flush messages self.limitflush = FALSE # Flush oversized messages self.fetchall = FALSE # Fetch old messages self.rewrite = TRUE # Rewrite message headers self.forcecr = FALSE # Force LF -> CR/LF self.stripcr = FALSE # Strip CR self.pass8bits = FALSE # Force BODY=7BIT self.mimedecode = FALSE # Undo MIME armoring self.dropstatus = FALSE # Drop incoming Status lines self.dropdelivered = FALSE # Drop incoming Delivered-To lines self.idle = FALSE # IDLE after poll self.forceidle = FALSE # Force IDLE self.limit = 0 # Message size limit self.warnings = 3600 # Size warning interval (see tunable.h) self.fetchlimit = 0 # Max messages fetched per batch self.fetchsizelimit = 100 # Max message sizes fetched per transaction self.fastuidl = 4 # Do fast uidl 3 out of 4 times self.batchlimit = 0 # Max message forwarded per batch self.expunge = 0 # Interval between expunges (IMAP) self.ssl = 0 # Enable Seccure Socket Layer self.sslkey = None # SSL key filename self.sslcert = None # SSL certificate filename self.sslproto = None # Force SSL? self.sslcertck = True # Enable strict SSL cert checking self.sslcertfile = None # Path to bundled file with trusted certificates self.sslcertpath = None # Path to hashed directory trusted certificates self.sslcommonname = None # SSL CommonName to expect self.sslfingerprint = None # SSL key fingerprint to check self.properties = None # Extension properties User.typemap = ( ('remote', 'String'), # leave out mailboxes and localnames ('password', 'String'), # Leave out smtphunt, fetchdomains ('smtpaddress', 'String'), ('smtpname', 'String'), ('preconnect', 'String'), ('postconnect', 'String'), ('mda', 'String'), ('bsmtp', 'String'), ('lmtp', 'Boolean'), ('antispam', 'String'), ('keep', 'Boolean'), ('flush', 'Boolean'), ('limitflush', 'Boolean'), ('fetchall', 'Boolean'), ('rewrite', 'Boolean'), ('forcecr', 'Boolean'), ('stripcr', 'Boolean'), ('pass8bits', 'Boolean'), ('mimedecode', 'Boolean'), ('dropstatus', 'Boolean'), ('dropdelivered', 'Boolean'), ('idle', 'Boolean'), ('forceidle', 'Boolean'), ('limit', 'Int'), ('warnings', 'Int'), ('fetchlimit', 'Int'), ('fetchsizelimit', 'Int'), ('fastuidl', 'Int'), ('batchlimit', 'Int'), ('expunge', 'Int'), ('ssl', 'Boolean'), ('sslkey', 'String'), ('sslcert', 'String'), ('sslcertck', 'Boolean'), ('sslcertfile', 'String'), ('sslcertpath', 'String'), ('sslcommonname', 'String'), ('sslfingerprint', 'String'), ('properties', 'String')) def __repr__(self): res = " " res = res + "user " + repr(self.remote) + " there " if self.password: res = res + "with password " + repr(self.password) + " " if self.localnames: res = res + "is" for x in self.localnames: res = res + " " + repr(x) res = res + " here" if (self.keep != UserDefaults.keep or self.flush != UserDefaults.flush or self.limitflush != UserDefaults.limitflush or self.fetchall != UserDefaults.fetchall or self.rewrite != UserDefaults.rewrite or self.forcecr != UserDefaults.forcecr or self.stripcr != UserDefaults.stripcr or self.pass8bits != UserDefaults.pass8bits or self.mimedecode != UserDefaults.mimedecode or self.dropstatus != UserDefaults.dropstatus or self.dropdelivered != UserDefaults.dropdelivered or self.idle != UserDefaults.idle or self.forceidle != UserDefaults.forceidle): res = res + " options" if self.keep != UserDefaults.keep: res = res + flag2str(self.keep, 'keep') if self.flush != UserDefaults.flush: res = res + flag2str(self.flush, 'flush') if self.limitflush != UserDefaults.limitflush: res = res + flag2str(self.limitflush, 'limitflush') if self.fetchall != UserDefaults.fetchall: res = res + flag2str(self.fetchall, 'fetchall') if self.rewrite != UserDefaults.rewrite: res = res + flag2str(self.rewrite, 'rewrite') if self.forcecr != UserDefaults.forcecr: res = res + flag2str(self.forcecr, 'forcecr') if self.stripcr != UserDefaults.stripcr: res = res + flag2str(self.stripcr, 'stripcr') if self.pass8bits != UserDefaults.pass8bits: res = res + flag2str(self.pass8bits, 'pass8bits') if self.mimedecode != UserDefaults.mimedecode: res = res + flag2str(self.mimedecode, 'mimedecode') if self.dropstatus != UserDefaults.dropstatus: res = res + flag2str(self.dropstatus, 'dropstatus') if self.dropdelivered != UserDefaults.dropdelivered: res = res + flag2str(self.dropdelivered, 'dropdelivered') if self.idle != UserDefaults.idle: res = res + flag2str(self.idle, 'idle') if self.forceidle != UserDefaults.forceidle: res = res + flag2str(self.forceidle, 'forceidle') if self.limit != UserDefaults.limit: res = res + " limit " + repr(self.limit) if self.warnings != UserDefaults.warnings: res = res + " warnings " + repr(self.warnings) if self.fetchlimit != UserDefaults.fetchlimit: res = res + " fetchlimit " + repr(self.fetchlimit) if self.fetchsizelimit != UserDefaults.fetchsizelimit: res = res + " fetchsizelimit " + repr(self.fetchsizelimit) if self.fastuidl != UserDefaults.fastuidl: res = res + " fastuidl " + repr(self.fastuidl) if self.batchlimit != UserDefaults.batchlimit: res = res + " batchlimit " + repr(self.batchlimit) if self.ssl and self.ssl != UserDefaults.ssl: res = res + flag2str(self.ssl, 'ssl') if self.sslkey and self.sslkey != UserDefaults.sslkey: res = res + " sslkey " + repr(self.sslkey) if self.sslcert and self.sslcert != UserDefaults.sslcert: res = res + " sslcert " + repr(self.sslcert) if self.sslproto and self.sslproto != UserDefaults.sslproto: res = res + " sslproto " + repr(self.sslproto) if self.sslcertck is not None and self.sslcertck != UserDefaults.sslcertck: res = res + flag2str(self.sslcertck, 'sslcertck') if self.sslcertfile and self.sslcertfile != UserDefaults.sslcertfile: res = res + " sslcertfile " + repr(self.sslcertfile) if self.sslcertpath and self.sslcertpath != UserDefaults.sslcertpath: res = res + " sslcertpath " + repr(self.sslcertpath) if self.sslcommonname and self.sslcommonname != UserDefaults.sslcommonname: res = res + " sslcommonname " + repr(self.sslcommonname) if self.sslfingerprint and self.sslfingerprint != UserDefaults.sslfingerprint: res = res + " sslfingerprint " + repr(self.sslfingerprint) if self.expunge != UserDefaults.expunge: res = res + " expunge " + repr(self.expunge) res = res + "\n" trimmed = self.smtphunt if trimmed != [] and trimmed[len(trimmed) - 1] == "localhost": trimmed = trimmed[0:len(trimmed) - 1] if trimmed != [] and trimmed[len(trimmed) - 1] == hostname: trimmed = trimmed[0:len(trimmed) - 1] if trimmed != []: res = res + " smtphost " for x in trimmed: res = res + " " + x res = res + "\n" trimmed = self.fetchdomains if trimmed != [] and trimmed[len(trimmed) - 1] == hostname: trimmed = trimmed[0:len(trimmed) - 1] if trimmed != []: res = res + " fetchdomains " for x in trimmed: res = res + " " + x res = res + "\n" if self.mailboxes: res = res + " folder" for x in self.mailboxes: res = res + ' "%s"' % x res = res + "\n" for fld in ('smtpaddress', 'preconnect', 'postconnect', 'mda', 'bsmtp', 'properties'): if getattr(self, fld): res = res + " %s %s\n" % (fld, repr(getattr(self, fld))) if self.lmtp != UserDefaults.lmtp: res = res + flag2str(self.lmtp, 'lmtp') if self.antispam != UserDefaults.antispam: res = res + " antispam " + self.antispam + "\n" return res def __str__(self): return "[User: " + repr(self) + "]" # # Helper code # # IANA port assignments and bogus 1109 entry ianaservices = {"pop2":109, "pop3":110, "1109":1109, "imap":143, "smtp":25, "odmr":366} sslservices = { "pop3":995, "imap":993 } # fetchmail protocol to IANA service name defaultports = {"auto":None, "POP2":"pop2", "POP3":"pop3", "APOP":"pop3", "KPOP":"1109", "IMAP":"imap", "ETRN":"smtp", "ODMR":"odmr"} authlist = ("any", "password", "gssapi", "kerberos", "implicit", "otp", "msn", "ntlm") listboxhelp = { 'title' : 'List Selection Help', 'banner': 'List Selection', 'text' : """ You must select an item in the list box (by clicking on it). """} def flag2str(value, string): # make a string representation of a .fetchmailrc flag or negated flag res = "" if value != None: res = res + (" ") if not value: res = res + ("no ") res = res + string return res class LabeledEntry(Frame): # widget consisting of entry field with caption to left def bind(self, key, action): self.entry.bind(key, action) def focus_set(self): self.entry.focus_set() def __init__(self, Master, text, textvar, lwidth, ewidth=12): Frame.__init__(self, Master) self.label = Label(self, {'text':text, 'width':lwidth, 'anchor':'w'}) self.entry = Entry(self, {'textvar':textvar, 'width':ewidth}) self.label.pack({'side':'left'}) self.entry.pack({'side':'left', 'expand':'1', 'fill':'x'}) def ButtonBar(frame, legend, ref, alternatives, depth, command): # array of radio buttons, caption to left, picking from a string list bbar = Frame(frame) width = (len(alternatives)+1) // depth Label(bbar, text=legend).pack(side=LEFT) for column in range(width): subframe = Frame(bbar) for row in range(depth): ind = width * row + column if ind < len(alternatives): Radiobutton(subframe, {'text':alternatives[ind], 'variable':ref, 'value':alternatives[ind], 'command':command}).pack(side=TOP, anchor=W) else: # This is just a spacer Radiobutton(subframe, {'text':" ",'state':DISABLED}).pack(side=TOP, anchor=W) subframe.pack(side=LEFT) bbar.pack(side=TOP) return bbar def helpwin(helpdict): # help message window with a self-destruct button h_w = Toplevel() h_w.title(helpdict['title']) h_w.iconname(helpdict['title']) Label(h_w, text=helpdict['banner']).pack() textframe = Frame(h_w) scroll = Scrollbar(textframe) h_w.textwidget = Text(textframe, setgrid=TRUE) textframe.pack(side=TOP, expand=YES, fill=BOTH) h_w.textwidget.config(yscrollcommand=scroll.set) h_w.textwidget.pack(side=LEFT, expand=YES, fill=BOTH) scroll.config(command=h_w.textwidget.yview) scroll.pack(side=RIGHT, fill=BOTH) h_w.textwidget.insert(END, helpdict['text']) Button(h_w, text='Done', command=lambda x=h_w: x.destroy(), bd=2).pack() textframe.pack(side=TOP) def make_icon_window(base, image): icon_image = PhotoImage(data=image) icon_window = Toplevel() Label(icon_window, image=icon_image, bg='black').pack() base.master.iconwindow(icon_window) # Avoid TkInter brain death. PhotoImage objects go out of # scope when the enclosing function returns. Therefore # we have to explicitly link them to something. base.keepalive.append(icon_image) class ListEdit(Frame): # edit a list of values (duplicates not allowed) with a supplied editor hook def __init__(self, newlegend, list_cont, editor, deletor, master, helptxt): Frame.__init__(self, master) self.editor = editor self.deletor = deletor self.list_cont = list_cont # Set up a widget to accept new elements self.newval = StringVar(master) newwin = LabeledEntry(master, newlegend, self.newval, '12') newwin.bind('', self.handleNew) newwin.bind('', self.handleNew) newwin.pack(side=TOP, fill=X, anchor=E) # Edit the existing list listframe = Frame(master) scroll = Scrollbar(listframe) self.listwidget = Listbox(listframe, height=0, selectmode='browse') if self.list_cont: for i in self.list_cont: self.listwidget.insert(END, i) listframe.pack(side=TOP, expand=YES, fill=BOTH) self.listwidget.config(yscrollcommand=scroll.set) self.listwidget.pack(side=LEFT, expand=YES, fill=BOTH) scroll.config(command=self.listwidget.yview) scroll.pack(side=RIGHT, fill=BOTH) self.listwidget.config(selectmode=SINGLE, setgrid=TRUE) self.listwidget.bind('', self.handleList) self.listwidget.bind('', self.handleList) bf = Frame(master) if self.editor: Button(bf, text='Edit', command=self.editItem).pack(side=LEFT) Button(bf, text='Delete', command=self.deleteItem).pack(side=LEFT) if helptxt: self.helptxt = helptxt Button(bf, text='Help', fg='blue', command=self.help).pack(side=RIGHT) bf.pack(fill=X) def help(self): helpwin(self.helptxt) def handleList(self, unused): self.editItem() def handleNew(self, unused): item = self.newval.get() if item: entire = self.listwidget.get(0, self.listwidget.index('end')) if item and (not entire) or (not item in self.listwidget.get(0, self.listwidget.index('end'))): self.listwidget.insert('end', item) if self.list_cont != None: self.list_cont.append(item) if self.editor: self.editor(*(item,)) self.newval.set('') def editItem(self): select = self.listwidget.curselection() if not select: helpwin(listboxhelp) else: index = int(select[0]) if self.editor: label = self.listwidget.get(index) if self.editor: self.editor(*(label,)) def deleteItem(self): select = self.listwidget.curselection() if not select: helpwin(listboxhelp) else: index = int(select[0]) label = self.listwidget.get(index) self.listwidget.delete(index) if self.list_cont != None: del self.list_cont[index] if self.deletor != None: self.deletor(*(label,)) def ConfirmQuit(frame, context): ans = Dialog(frame, title = 'Quit?', text = 'Really quit ' + context + ' without saving?', bitmap = 'question', strings = ('Yes', 'No'), default = 1) return ans.num == 0 def dispose_window(master, legend, help_text, savelegend='OK'): dispose = Frame(master, relief=RAISED, bd=5) Label(dispose, text=legend).pack(side=TOP,pady=10) Button(dispose, text=savelegend, fg='blue', command=master.save).pack(side=LEFT) Button(dispose, text='Quit', fg='blue', command=master.nosave).pack(side=LEFT) Button(dispose, text='Help', fg='blue', command=lambda x=help_text: helpwin(x)).pack(side=RIGHT) dispose.pack(fill=X) return dispose class MyWidget(object): # Common methods for Tkinter widgets -- deals with Tkinter declaration def post(self, widgetclass, field): for x in widgetclass.typemap: if x[1] == 'Boolean': setattr(self, x[0], BooleanVar(self)) elif x[1] == 'String': setattr(self, x[0], StringVar(self)) elif x[1] == 'Int': setattr(self, x[0], IntVar(self)) source = getattr(getattr(self, field), x[0]) if source: getattr(self, x[0]).set(source) def fetch(self, widgetclass, field): for x in widgetclass.typemap: setattr(getattr(self, field), x[0], getattr(self, x[0]).get()) # # First, code to set the global fetchmail run controls. # configure_novice_help = { 'title' : 'Fetchmail novice configurator help', 'banner': 'Novice configurator help', 'text' : """ In the `Novice Configurator Controls' panel, you can: Press `Save' to save the new fetchmail configuration you have created. Press `Quit' to exit without saving. Press `Help' to bring up this help message. In the `Novice Configuration' panels, you will set up the basic data needed to create a simple fetchmail setup. These include: 1. The name of the remote site you want to query. 2. Your login name on that site. 3. Your password on that site. 4. A protocol to use (POP, IMAP, ETRN, etc.) 5. A poll interval in seconds. If 0, fetchmail will run in the foreground once when started. If > 0, fetchmail will run in the background and start a new poll cycle after the interval has elapsed. 6. Options to fetch old messages as well as new, or to suppress deletion of fetched message. The novice-configuration code will assume that you want to forward mail to a local sendmail listener with no special options. """} configure_expert_help = { 'title' : 'Fetchmail expert configurator help', 'banner': 'Expert configurator help', 'text' : """ In the `Expert Configurator Controls' panel, you can: Press `Save' to save the new fetchmail configuration you have edited. Press `Quit' to exit without saving. Press `Help' to bring up this help message. In the `Run Controls' panel, you can set the following options that control how fetchmail runs: Poll interval Number of seconds to wait between polls in the background. If zero, fetchmail will run in foreground. Logfile If empty, emit progress and error messages to stderr. Otherwise this gives the name of the files to write to. This field is ignored if the "Log to syslog?" option is on. Idfile If empty, store seen-message IDs in .fetchids under user's home directory. If nonempty, use given file name. Postmaster Who to send multidrop mail to as a last resort if no address can be matched. Normally empty; in this case, fetchmail treats the invoking user as the address of last resort unless that user is root. If that user is root, fetchmail sends to `postmaster'. Bounces to sender? If this option is on (the default) error mail goes to the sender. Otherwise it goes to the postmaster. Send spam bounces? If this option is on, spam bounces are sent to the sender or postmaster (depending on the "Bounces to sender?" option. Otherwise, spam bounces are not sent (the default). Use soft bounces? If this option is on, permanent delivery errors are treated as temporary, i. e. mail is kept on the upstream server. Useful during testing and after configuration changes, and on by default. If this option is off, permanent delivery errors delete undeliverable mail from the upstream. Invisible If false (the default) fetchmail generates a Received line into each message and generates a HELO from the machine it is running on. If true, fetchmail generates no Received line and HELOs as if it were the remote site. In the `Remote Mail Configurations' panel, you can: 1. Enter the name of a new remote mail server you want fetchmail to query. To do this, simply enter a label for the poll configuration in the `New Server:' box. The label should be a DNS name of the server (unless you are using ssh or some other tunneling method and will fill in the `via' option on the site configuration screen). 2. Change the configuration of an existing site. To do this, find the site's label in the listbox and double-click it. This will take you to a site configuration dialogue. """} class ConfigurationEdit(Frame, MyWidget): def __init__(self, configuration, outfile, master, onexit): Frame.__init__(self, master) MyWidget.__init__(self) self.subwidgets = {} self.configuration = configuration self.outfile = outfile self.container = master self.onexit = onexit self.keepalive = [] # Use this to anchor the PhotoImage object self.mode = None # Novice or Expert ConfigurationEdit.mode_to_help = { 'novice':configure_novice_help, 'expert':configure_expert_help } def server_edit(self, sitename): self.subwidgets[sitename] = ServerEdit(sitename, self).edit(self.mode, Toplevel()) def server_delete(self, sitename): try: for user_it in list(self.subwidgets.keys()): self.configuration[sitename].destruct() del self.configuration[sitename] except Exception as e: print("Exception discarded in ConfigurationEdit.server_delete(): {}".format(e)) def edit(self, mode): self.mode = mode Frame.__init__(self, self.container) self.master.title('fetchmail ' + self.mode + ' configurator') self.master.iconname('fetchmail ' + self.mode + ' configurator') self.master.protocol('WM_DELETE_WINDOW', self.nosave) self.keepalive = [] # Use this to anchor the PhotoImage object make_icon_window(self, fetchmail_icon) Pack.config(self) self.post(Configuration, 'configuration') dispose_window(self, 'Configurator ' + self.mode + ' Controls', ConfigurationEdit.mode_to_help[self.mode], 'Save') gf = Frame(self, relief=RAISED, bd = 5) Label(gf, text='Fetchmail Run Controls', bd=2).pack(side=TOP, pady=10) df = Frame(gf) ff = Frame(df) if self.mode != 'novice': # Set the postmaster log = LabeledEntry(ff, ' Postmaster:', self.postmaster, '14') log.pack(side=RIGHT, anchor=E) # Set the poll interval de = LabeledEntry(ff, ' Poll interval:', self.poll_interval, '14') de.pack(side=RIGHT, anchor=E) ff.pack() df.pack() if self.mode != 'novice': pf = Frame(gf) Checkbutton(pf, {'text':'Bounces to sender?', 'variable':self.bouncemail, 'relief':GROOVE}).pack(side=LEFT, anchor=W) pf.pack(fill=X) sb = Frame(gf) Checkbutton(sb, {'text':'Send spam bounces?', 'variable':self.spambounce, 'relief':GROOVE}).pack(side=LEFT, anchor=W) sb.pack(fill=X) sb = Frame(gf) Checkbutton(sb, {'text':'Treat permanent errors as temporary?', 'variable':self.softbounce, 'relief':GROOVE}).pack(side=LEFT, anchor=W) sb.pack(fill=X) sf = Frame(gf) Checkbutton(sf, {'text':'Log to syslog?', 'variable':self.syslog, 'relief':GROOVE}).pack(side=LEFT, anchor=W) log = LabeledEntry(sf, ' Logfile:', self.logfile, '14') log.pack(side=RIGHT, anchor=E) sf.pack(fill=X) Checkbutton(gf, {'text':'Invisible mode?', 'variable':self.invisible, 'relief':GROOVE}).pack(side=LEFT, anchor=W) # Set the idfile log = LabeledEntry(gf, ' Idfile:', self.idfile, '14') log.pack(side=RIGHT, anchor=E) gf.pack(fill=X) # Expert mode allows us to edit multiple sites lf = Frame(self, relief=RAISED, bd=5) Label(lf, text='Remote Mail Server Configurations', bd=2).pack(side=TOP, pady=10) ListEdit('New Server:', [i.pollname for i in self.configuration.servers], lambda site, self=self: self.server_edit(site), lambda site, self=self: self.server_delete(site), lf, remotehelp) lf.pack(fill=X) def destruct(self): for sitename in list(self.subwidgets.keys()): self.subwidgets[sitename].destruct() self.master.destroy() self.onexit() def nosave(self): if ConfirmQuit(self, self.mode + " configuration editor"): self.destruct() def save(self): for i in self.subwidgets: i.save() self.fetch(Configuration, 'configuration') fm = None if not self.outfile: fm = sys.stdout elif (not os.path.isfile(self.outfile) or Dialog(self, title = 'Overwrite existing run control file?', text = 'Really overwrite existing run control file?', bitmap = 'question', strings = ('Yes', 'No'), default = 1).num == 0): try: os.rename(self.outfile, self.outfile + "~") # Pre-1.5.2 compatibility... except os.error: pass oldumask = os.umask(0o77) fm = open(self.outfile, 'w') os.umask(oldumask) if fm: # be paranoid if fm != sys.stdout: os.chmod(self.outfile, 0o600) fm.write("# Configuration created %s by fetchmailconf %s\n" % (time.ctime(time.time()), VERSION)) fm.write(repr(self.configuration)) if self.outfile: fm.close() self.destruct() # # Server editing stuff. # remotehelp = { 'title' : 'Remote site help', 'banner': 'Remote sites', 'text' : """ When you add a site name to the list here, you initialize an entry telling fetchmail how to poll a new site. When you select a sitename (by double- clicking it, or by single-clicking to select and then clicking the Edit button), you will open a window to configure that site. """} serverhelp = { 'title' : 'Server options help', 'banner': 'Server Options', 'text' : """ The server options screen controls fetchmail options that apply to one of your mailservers. Once you have a mailserver configuration set up as you like it, you can select `OK' to store it in the server list maintained in the main configuration window. If you wish to discard changes to a server configuration, select `Quit'. """} controlhelp = { 'title' : 'Run Control help', 'banner': 'Run Controls', 'text' : """ If the `Poll normally' checkbox is on, the host is polled as part of the normal operation of fetchmail when it is run with no arguments. If it is off, fetchmail will only query this host when it is given as a command-line argument. The `True name of server' box should specify the actual DNS name to query. By default this is the same as the poll name. Normally each host described in the file is queried once each poll cycle. If `Cycles to skip between polls' is greater than 0, that's the number of poll cycles that are skipped between the times this post is actually polled. The `Server timeout' is the number of seconds fetchmail will wait for a reply from the mailserver before concluding it is hung and giving up. """} protohelp = { 'title' : 'Protocol and Port help', 'banner': 'Protocol and Port', 'text' : """ These options control the remote-mail protocol and TCP/IP service port used to query this server. If you click the `Probe for supported protocols' button, fetchmail will try to find you the most capable server on the selected host (this will only work if you're conncted to the Internet). The probe only checks for ordinary IMAP and POP protocols; fortunately these are the most frequently supported. The `Protocol' button bar offers you a choice of all the different protocols available. The `auto' protocol is the default mode; it probes the host ports for POP3 and IMAP to see if either is available. Normally the TCP/IP service port to use is dictated by the protocol choice. The `Service' field (only present in expert mode) lets you set a non-standard service (port). """} sechelp = { 'title' : 'Security option help', 'banner': 'Security', 'text' : """ The 'authorization mode' allows you to choose the mode that fetchmail uses to log in to your server. You can usually leave this at 'any', but you will have to pick 'NTLM' and 'MSN' manually for the nonce. The 'interface' option allows you to specify a range of IP addresses to monitor for activity. If these addresses are not active, fetchmail will not poll. Specifying this may protect you from a spoofing attack if your client machine has more than one IP gateway address and some of the gateways are to insecure nets. The `monitor' option, if given, specifies the only device through which fetchmail is permitted to connect to servers. This option may be used to prevent fetchmail from triggering an expensive dial-out if the interface is not already active. The `interface' and `monitor' options are available only for Linux and freeBSD systems. See the fetchmail manual page for details on these. The ssl option enables SSL communication with a mailserver supporting Secure Sockets Layer. The sslkey and sslcert options declare key and certificate files for use with SSL. The sslcertck option enables strict checking of SSL server certificates (and sslcertpath gives the trusted certificate directory). The sslcommonname option helps if the server is misconfigured and returning "Server CommonName mismatch" warnings. With sslfingerprint, you can specify a finger- print the server's key is checked against. """} multihelp = { 'title' : 'Multidrop option help', 'banner': 'Multidrop', 'text' : """ These options are only useful with multidrop mode. See the manual page for extended discussion. """} suserhelp = { 'title' : 'User list help', 'banner': 'User list', 'text' : """ When you add a user name to the list here, you initialize an entry telling fetchmail to poll the site on behalf of the new user. When you select a username (by double- clicking it, or by single-clicking to select and then clicking the Edit button), you will open a window to configure the user's options on that site. """} def get_greetline(_hostname, port, sslmode): sock = None greetline = None address = None errors = [] for res in socket.getaddrinfo(_hostname, port, socket.AF_UNSPEC, socket.SOCK_STREAM): af, socktype, proto, canonname, sa = res try: sock = socket.socket(af, socktype, proto) sock.settimeout(5) except socket.error as msg: errors.append("socket({}, {}, {}): {}".format(repr(af), repr(socktype), repr(proto), msg)) sock = None continue try: if sslmode: context = ssl.create_default_context() conn = context.wrap_socket(sock, server_hostname = canonname or _hostname) else: conn = sock conn.connect(sa) greetline = conn.recv(1024).decode('us-ascii','replace') conn.shutdown(socket.SHUT_RDWR) conn.close() address = sa except (socket.error, ssl.SSLError) as msg: errors.append("{} port {}: {}".format(sa[0], sa[1], msg)) sock.close() sock = None continue break return greetline, address, errors class ServerEdit(Frame, MyWidget): def __init__(self, host, parent): Frame.__init__(self) MyWidget.__init__(self) self.parent = parent self.server = None self.subwidgets = {} self.keepalive = [] # Use this to anchor the PhotoImage object for site in parent.configuration.servers: if site.pollname == host: self.server = site if self.server is None: self.server = Server() self.server.pollname = host self.server.via = None parent.configuration.servers.append(self.server) def edit(self, mode, master=None): Frame.__init__(self, master) Pack.config(self) self.master.title('Fetchmail host ' + self.server.pollname) self.master.iconname('Fetchmail host ' + self.server.pollname) self.post(Server, 'server') self.makeWidgets(self.server.pollname, mode) self.keepalive = [] # Use this to anchor the PhotoImage object make_icon_window(self, fetchmail_icon) # self.grab_set() # self.focus_set() # self.wait_window() return self def destruct(self): for username in list(self.subwidgets.keys()): self.subwidgets[username].destruct() del self.parent.subwidgets[self.server.pollname] self.master.destroy() def nosave(self): if ConfirmQuit(self, 'server option editing'): self.destruct() def save(self): self.fetch(Server, 'server') for username, userdata in list(self.subwidgets.items()): userdata.save() self.destruct() def defaultPort(self): proto = self.protocol.get() # Callback to reset the port number whenever the protocol type changes. # We used to only reset the port if it had a default (zero) value. # This turns out to be a bad idea especially in Novice mode -- if # you set POP3 and then set IMAP, the port invisibly remained 110. # Now we reset unconditionally on the theory that if you're setting # a custom port number you should be in expert mode and playing # close enough attention to notice this... self.service.set(defaultports[proto]) if not proto in ("POP3", "APOP", "KPOP"): self.uidl.state = DISABLED def user_edit(self, username, mode): self.subwidgets[username] = UserEdit(username, self).edit(mode, Toplevel()) def user_delete(self, username): if username in self.subwidgets: self.subwidgets[username].destruct() del self.server[username] def makeWidgets(self, host, mode): topwin = dispose_window(self, "Server options for querying " + host, serverhelp) leftwin = Frame(self) leftwidth = '25' if mode != 'novice': ctlwin = Frame(leftwin, relief=RAISED, bd=5) Label(ctlwin, text="Run Controls").pack(side=TOP) Checkbutton(ctlwin, text='Poll ' + host + ' normally?', variable=self.active).pack(side=TOP) Checkbutton(ctlwin, text='Pass messages with bad headers?', variable=self.badheader).pack(side=TOP) LabeledEntry(ctlwin, 'True name of ' + host + ':', self.via, leftwidth).pack(side=TOP, fill=X) LabeledEntry(ctlwin, 'Cycles to skip between polls:', self.interval, leftwidth).pack(side=TOP, fill=X) LabeledEntry(ctlwin, 'Server timeout (seconds):', self.timeout, leftwidth).pack(side=TOP, fill=X) LabeledEntry(ctlwin, "Idle timeout (seconds):", self.idletimeout, leftwidth).pack(side=TOP, fill=X) Button(ctlwin, text='Help', fg='blue', command=lambda: helpwin(controlhelp)).pack(side=RIGHT) ctlwin.pack(fill=X) # Compute the available protocols from the compile-time options protolist = ['auto'] if 'pop2' in feature_options: protolist.append("POP2") if 'pop3' in feature_options: protolist = protolist + ["POP3", "APOP", "KPOP"] if 'sdps' in feature_options: protolist.append("SDPS") if 'imap' in feature_options: protolist.append("IMAP") if 'etrn' in feature_options: protolist.append("ETRN") if 'odmr' in feature_options: protolist.append("ODMR") protwin = Frame(leftwin, relief=RAISED, bd=5) Label(protwin, text="Protocol").pack(side=TOP) ButtonBar(protwin, '', self.protocol, protolist, 2, self.defaultPort) if mode != 'novice': LabeledEntry(protwin, 'On server TCP/IP service:', self.service, leftwidth).pack(side=TOP, fill=X) self.defaultPort() Checkbutton(protwin, text="POP3: track `seen' with client-side UIDLs?", variable=self.uidl).pack(side=TOP) Button(protwin, text='Probe for supported protocols', fg='blue', command=self.autoprobe).pack(side=LEFT) Button(protwin, text='Help', fg='blue', command=lambda: helpwin(protohelp)).pack(side=RIGHT) protwin.pack(fill=X) userwin = Frame(leftwin, relief=RAISED, bd=5) Label(userwin, text="User entries for " + host).pack(side=TOP) ListEdit("New user: ", [i.remote for i in self.server.users], lambda u, m=mode, s=self: s.user_edit(u, m), lambda u, s=self: s.user_delete(u), userwin, suserhelp) userwin.pack(fill=X) leftwin.pack(side=LEFT, anchor=N, fill=X) if mode != 'novice': rightwin = Frame(self) mdropwin = Frame(rightwin, relief=RAISED, bd=5) Label(mdropwin, text="Multidrop options").pack(side=TOP) LabeledEntry(mdropwin, 'Envelope address header:', self.envelope, '22').pack(side=TOP, fill=X) LabeledEntry(mdropwin, 'Envelope headers to skip:', self.envskip, '22').pack(side=TOP, fill=X) LabeledEntry(mdropwin, 'Name prefix to strip:', self.qvirtual, '22').pack(side=TOP, fill=X) Checkbutton(mdropwin, text="Enable multidrop DNS lookup?", variable=self.dns).pack(side=TOP) Label(mdropwin, text="DNS aliases").pack(side=TOP) ListEdit("New alias: ", self.server.aka, None, None, mdropwin, None) Label(mdropwin, text="Domains to be considered local").pack(side=TOP) ListEdit("New domain: ", self.server.localdomains, None, None, mdropwin, multihelp) mdropwin.pack(fill=X) if os_type in ('linux', 'freebsd'): secwin = Frame(rightwin, relief=RAISED, bd=5) Label(secwin, text="Security").pack(side=TOP) # Don't actually let users set this. KPOP sets it implicitly ButtonBar(secwin, 'Authorization mode:', self.auth, authlist, 2, None).pack(side=TOP) if os_type == 'linux' or os_type == 'freebsd' or 'interface' in dictmembers: LabeledEntry(secwin, 'IP range to check before poll:', self.interface, leftwidth).pack(side=TOP, fill=X) if os_type == 'linux' or os_type == 'freebsd' or 'monitor' in dictmembers: LabeledEntry(secwin, 'Interface to monitor:', self.monitor, leftwidth).pack(side=TOP, fill=X) # Someday this should handle Kerberos 5 too if 'kerberos' in feature_options: LabeledEntry(secwin, 'Principal:', self.principal, '12').pack(side=TOP, fill=X) # ESMTP authentication LabeledEntry(secwin, 'ESMTP name:', self.esmtpname, '12').pack(side=TOP, fill=X) LabeledEntry(secwin, 'ESMTP password:', self.esmtppassword, '12').pack(side=TOP, fill=X) Button(secwin, text='Help', fg='blue', command=lambda: helpwin(sechelp)).pack(side=RIGHT) secwin.pack(fill=X) rightwin.pack(side=LEFT, anchor=N) def autoprobe(self): # Note: this only handles case (1) near fetchmail.c:1032 # We're assuming people smart enough to set up ssh tunneling # won't need autoprobing. if self.server.via: realhost = self.server.via else: realhost = self.server.pollname errors=[] sslmode, protocol = None, None # will be used after loop confirm = "" try: for sslmode in True, False: for protocol in "IMAP", "POP3", "POP2": service = defaultports[protocol] if sslmode: if service not in sslservices: continue port = sslservices[service] else: port = ianaservices[service] greetline, address, new_errors = get_greetline(realhost, port, sslmode) if new_errors: errors += new_errors if greetline: break if greetline: break except socket.gaierror as e: confirm = """ Fetchmailconf could not resolve the hostname. Error was: """+str(e) except OSError as e: confirm = """ Fetchmailconf could not probe servers. Error was: """+str(e) confwin = Toplevel() if confirm: title = "Autoprobe of {} failed".format(realhost) elif greetline is None: title = "Autoprobe of " + realhost + " failed" confirm = """ Fetchmailconf didn't find any mailservers active. This could mean the host doesn't support any, or that your Internet connection is down, or that the host is so slow that the probe timed out before getting a response. """ + str('\n').join(errors) else: warnings = '' # OK, now try to recognize potential problems if protocol == "POP2": warnings = warnings + """ It appears you have somehow found a mailserver running only POP2. Congratulations. Have you considered a career in archaeology? Unfortunately, stock fetchmail binaries don't include POP2 support anymore. Unless the first line of your fetchmail -V output includes the string "POP2", you'll have to build it from sources yourself with the configure switch --enable-POP2. """ ### POP3 servers start here if '1.003' in greetline or '1.004' in greetline: warnings = warnings + """ This appears to be an old version of the UC Davis POP server. These are dangerously unreliable (among other problems, they may drop your mailbox on the floor if your connection is interrupted during the session). It is strongly recommended that you find a better POP3 server. The fetchmail FAQ includes pointers to good ones. """ if 'comcast.net' in greetline: warnings = warnings + """ The Comcast Maillennium POP3 server only returns the first 80K of a long message retrieved with TOP. Its response to RETR is normal, so use the `fetchall' option. """ # Steve VanDevender writes: # The only system I have seen this happen with is cucipop-1.31 # under SunOS 4.1.4. cucipop-1.31 runs fine on at least Solaris # 2.x and probably quite a few other systems. It appears to be a # bug or bad interaction with the SunOS realloc() -- it turns out # that internally cucipop does allocate a certain data structure in # multiples of 16, using realloc() to bump it up to the next # multiple if it needs more. # # The distinctive symptom is that when there are 16 messages in the # inbox, you can RETR and DELE all 16 messages successfully, but on # QUIT cucipop returns something like "-ERR Error locking your # mailbox" and aborts without updating it. # # The cucipop banner looks like: # # +OK Cubic Circle's v1.31 1998/05/13 POP3 ready <6229000062f95036@wakko> # if 'Cubic Circle' in greetline: warnings = warnings + """ I see your server is running cucipop. Better make sure the server box isn't a SunOS 4.1.4 machine; cucipop tickles a bug in SunOS realloc() under that version, and doesn't cope with the result gracefully. Newer SunOS and Solaris machines run cucipop OK. Also, some versions of cucipop don't assert an exclusive lock on your mailbox when it's being queried. This means that if you have more than one fetchmail query running against the same mailbox, bad things can happen. """ if 'David POP3 Server' in greetline: warnings = warnings + """ This POP3 server is badly broken. You should get rid of it -- and the brain-dead Microsoft operating system it rode in on. """ # The greeting line on the server known to be buggy is: # +OK POP3 server ready (running FTGate V2, 2, 1, 0 Jun 21 1999 09:55:01) # if 'FTGate' in greetline: warnings = warnings + """ This POP server has a weird bug; it says OK twice in response to TOP. Its response to RETR is normal, so use the `fetchall' option. """ if ' geonet.de' in greetline: warnings = warnings + """ You appear to be using geonet. As of late 2002, the TOP command on geonet's POP3 is broken. Use the fetchall option. """ if 'OpenMail' in greetline: warnings = warnings + """ You appear to be using some version of HP OpenMail. Many versions of OpenMail do not process the "TOP" command correctly; the symptom is that only the header and first line of each message is retrieved. To work around this bug, turn on `fetchall' on all user entries associated with this server. """ if 'Escape character is' in greetline: warnings = warnings + """ Your greeting line looks like it was written by a fetid pile of camel dung identified to me as `popa3d written by Solar Designer'. Beware! The UIDL support in this thing is known to be completely broken, and other things probably are too. """ if 'MercuryP/NLM v1.48' in greetline: warnings = warnings + """ This is not a POP3 server. It has delusions of being one, but after RETR all messages are automatically marked to be deleted. The only way to prevent this is to issue an RSET before leaving the server. Fetchmail does this, but we suspect this is probably broken in lots of other ways, too. """ if 'POP-Max' in greetline: warnings = warnings + """ The Mail Max POP3 server screws up on mail with attachments. It reports the message size with attachments included, but doesn't download them on a RETR or TOP (this violates the IMAP RFCs). It also doesn't implement TOP correctly. You should get rid of it -- and the brain-dead NT server it rode in on. """ if 'POP3 Server Ready' in greetline: warnings = warnings + """ Some server that uses this greeting line has been observed to choke on TOP %d 99999999. Use the fetchall option. if necessary, to force RETR. """ if 'QPOP' in greetline: warnings = warnings + """ This appears to be a version of Eudora qpopper. That's good. Fetchmail knows all about qpopper. However, be aware that the 2.53 version of qpopper does something odd that causes fetchmail to hang with a socket error on very large messages. This is probably not a fetchmail bug, as it has been observed with fetchpop. The fix is to upgrade to qpopper 3.0beta or a more recent version. Better yet, switch to IMAP. """ if ' sprynet.com' in greetline: warnings = warnings + """ You appear to be using a SpryNet server. In mid-1999 it was reported that the SpryNet TOP command marks messages seen. Therefore, for proper error recovery in the event of a line drop, it is strongly recommended that you turn on `fetchall' on all user entries associated with this server. """ if 'TEMS POP3' in greetline: warnings = warnings + """ Your POP3 server has "TEMS" in its header line. At least one such server does not process the "TOP" command correctly; the symptom is that fetchmail hangs when trying to retrieve mail. To work around this bug, turn on `fetchall' on all user entries associated with this server. """ if ' spray.se' in greetline: warnings = warnings + """ Your POP3 server has "spray.se" in its header line. In May 2000 at least one such server did not process the "TOP" command correctly; the symptom is that messages are treated as headerless. To work around this bug, turn on `fetchall' on all user entries associated with this server. """ if ' usa.net' in greetline: warnings = warnings + """ You appear to be using USA.NET's free mail service. Their POP3 servers (at least as of the 2.2 version in use mid-1998) are quite flaky, but fetchmail can compensate. They seem to require that fetchall be switched on (otherwise you won't necessarily see all your mail, not even new mail). They also botch the TOP command the fetchmail normally uses for retrieval (it only retrieves about 10 lines rather than the number specified). Turning on fetchall will disable the use of TOP. Therefore, it is strongly recommended that you turn on `fetchall' on all user entries associated with this server. """ if ' Novonyx POP3' in greetline: warnings = warnings + """ Your mailserver is running Novonyx POP3. This server, at least as of version 2.17, seems to have problems handling and reporting seen bits. You may have to use the fetchall option. """ if ' IMS POP3' in greetline: warnings = warnings + """ Some servers issuing the greeting line 'IMS POP3' have been known to do byte-stuffing incorrectly. This means that if a message you receive has a . (period) at start of line, fetchmail will become confused and probably wedge itself. (This bug was recorded on IMS POP3 0.86.) """ ### IMAP servers start here if 'GroupWise' in greetline: warnings = warnings + """ The Novell GroupWise IMAP server would be better named GroupFoolish; it is (according to the designer of IMAP) unusably broken. Among other things, it doesn't include a required content length in its BODY[TEXT] response.

Fetchmail works around this problem, but we strongly recommend voting with your dollars for a server that isn't brain-dead. If you stick with code as shoddy as GroupWise seems to be, you will probably pay for it with other problems.

""" if 'InterChange' in greetline: warnings = warnings + """ The InterChange IMAP server at release levels below 3.61.08 screws up on mail with attachments. It doesn't fetch them if you give it a BODY[TEXT] request, though it does if you request RFC822.TEXT. According to the IMAP RFCs and their maintainer these should be equivalent -- and we can't drop the BODY[TEXT] form because M$ Exchange (quite legally under RFC2062) rejectsit. The InterChange folks claim to have fixed this bug in 3.61.08. """ if 'Imail' in greetline: warnings = warnings + """ We've seen a bug report indicating that this IMAP server (at least as of version 5.0.7) returns an invalid body size for messages with MIME attachments; the effect is to drop the attachments on the floor. We recommend you upgrade to a non-broken IMAP server. """ if 'Domino IMAP4' in greetline: warnings = warnings + """ Your IMAP server appears to be Lotus Domino. This server, at least up to version 4.6.2a, has a bug in its generation of MIME boundaries (see the details in the fetchmail FAQ). As a result, even MIME aware MUAs will see attachments as part of the message text. If your Domino server's POP3 facility is enabled, we recommend you fall back on it. """ ### Checks for protocol variants start here closebrak = greetline.find(">") if closebrak > 0 and greetline[closebrak+1] == "\r": warnings = warnings + """ It looks like you could use APOP on this server and avoid sending it your password in clear. You should talk to the mailserver administrator about this. """ if 'IMAP2bis' in greetline: warnings = warnings + """ IMAP2bis servers have a minor problem; they can't peek at messages without marking them seen. If you take a line hit during the retrieval, the interrupted message may get left on the server, marked seen. To work around this, it is recommended that you set the `fetchall' option on all user entries associated with this server, so any stuck mail will be retrieved next time around. To fix this bug, upgrade to an IMAP4 server. The fetchmail FAQ includes a pointer to an open-source implementation. """ if 'IMAP4rev1' in greetline: warnings = warnings + """ I see an IMAP4rev1 server. Excellent. This is (a) the best kind of remote-mail server, and (b) the one the fetchmail author uses. Fetchmail has therefore been extremely well tested with this class of server. """ if warnings == '': warnings = warnings + """ Fetchmail doesn't know anything special about this server type. """ # Display success window with warnings title = "Autoprobe of " + realhost + " succeeded" confirm = ("The {} server at {} port {} (SSL {}) said:\n\n" .format(protocol, address[0], address[1], sslmode) + greetline + warnings) self.protocol.set(protocol) self.service.set(defaultports[protocol]) self.server.ssldefault = sslmode confwin.title(title) confwin.iconname(title) Label(confwin, text=title).pack() Message(confwin, text=confirm, width=600).pack() Button(confwin, text='Done', command=lambda x=confwin: x.destroy(), bd=2).pack() # # User editing stuff # userhelp = { 'title' : 'User option help', 'banner': 'User options', 'text' : """ You may use this panel to set options that may differ between individual users on your site. Once you have a user configuration set up as you like it, you can select `OK' to store it in the user list maintained in the site configuration window. If you wish to discard the changes you have made to user options, select `Quit'. """} localhelp = { 'title' : 'Local name help', 'banner': 'Local names', 'text' : """ The local name(s) in a user entry are the people on the client machine who should receive mail from the poll described. Note: if a user entry has more than one local name, messages will be retrieved in multidrop mode. This complicates the configuration issues; see the manual page section on multidrop mode. Warning: Be careful with local names such as foo@bar.com, as that can cause the mail to be sent to foo@bar.com instead of sending it to your local system. """} class UserEdit(Frame, MyWidget): def __init__(self, username, parent): Frame.__init__(self) MyWidget.__init__(self) self.parent = parent self.user = None self.keepalive = [] # Use this to anchor the PhotoImage object for user in parent.server.users: if user.remote == username: self.user = user if self.user is None: self.user = User() self.user.remote = username self.user.localnames = [username] self.user.ssl = parent.server.ssldefault parent.server.users.append(self.user) def edit(self, mode, master=None): Frame.__init__(self, master) Pack.config(self) self.master.title('Fetchmail user ' + self.user.remote + ' querying ' + self.parent.server.pollname) self.master.iconname('Fetchmail user ' + self.user.remote) self.post(User, 'user') self.makeWidgets(mode, self.parent.server.pollname) self.keepalive = [] # Use this to anchor the PhotoImage object make_icon_window(self, fetchmail_icon) # self.grab_set() # self.focus_set() # self.wait_window() return self def destruct(self): # Yes, this test can fail -- if you delete the parent window. if self.user.remote in self.parent.subwidgets: del self.parent.subwidgets[self.user.remote] self.master.destroy() def nosave(self): if ConfirmQuit(self, 'user option editing'): self.destruct() def save(self): ok = 0 for x in self.user.localnames: ok = ok + ('@' in x) if (ok == 0 or Dialog(self, title = "Really accept an embedded '@' ?", text = "Local names with an embedded '@', such as in foo@bar " "might result in your mail being sent to foo@bar.com " "instead of your local system.\n Are you sure you want " "a local user name with an '@' in it?", bitmap = 'question', strings = ('Yes', 'No'), default = 1).num == 0): self.fetch(User, 'user') self.destruct() def makeWidgets(self, mode, servername): dispose_window(self, "User options for " + self.user.remote + " querying " + servername, userhelp) if mode != 'novice': leftwin = Frame(self) else: leftwin = self secwin = Frame(leftwin, relief=RAISED, bd=5) Label(secwin, text="Authentication").pack(side=TOP) LabeledEntry(secwin, 'Password:', self.password, '12').pack(side=TOP, fill=X) secwin.pack(fill=X, anchor=N) if 'ssl' in feature_options or 'ssl' in dictmembers: sslwin = Frame(leftwin, relief=RAISED, bd=5) Checkbutton(sslwin, text="Use SSL?", variable=self.ssl).pack(side=TOP, fill=X) LabeledEntry(sslwin, 'SSL key:', self.sslkey, '14').pack(side=TOP, fill=X) LabeledEntry(sslwin, 'SSL certificate:', self.sslcert, '14').pack(side=TOP, fill=X) Checkbutton(sslwin, text="Check server SSL certificate?", variable=self.sslcertck).pack(side=TOP, fill=X) LabeledEntry(sslwin, 'SSL trust bundle:', self.sslcertfile, '14').pack(side=TOP, fill=X) LabeledEntry(sslwin, 'SSL trust directory:', self.sslcertpath, '14').pack(side=TOP, fill=X) LabeledEntry(sslwin, 'SSL CommonName:', self.sslcommonname, '14').pack(side=TOP, fill=X) LabeledEntry(sslwin, 'SSL key fingerprint:', self.sslfingerprint, '14').pack(side=TOP, fill=X) sslwin.pack(fill=X, anchor=N) names = Frame(leftwin, relief=RAISED, bd=5) Label(names, text="Local names").pack(side=TOP) ListEdit("New name: ", self.user.localnames, None, None, names, localhelp) names.pack(fill=X, anchor=N) if mode != 'novice': targwin = Frame(leftwin, relief=RAISED, bd=5) Label(targwin, text="Forwarding Options").pack(side=TOP) Label(targwin, text="Listeners to forward to").pack(side=TOP) ListEdit("New listener:", self.user.smtphunt, None, None, targwin, None) Label(targwin, text="Domains to fetch from (ODMR/ETRN only)").pack(side=TOP) ListEdit("Domains:", self.user.fetchdomains, None, None, targwin, None) LabeledEntry(targwin, 'Use domain on RCPT TO line:', self.smtpaddress, '26').pack(side=TOP, fill=X) LabeledEntry(targwin, 'Set fixed RCPT TO address:', self.smtpname, '26').pack(side=TOP, fill=X) LabeledEntry(targwin, 'Connection setup command:', self.preconnect, '26').pack(side=TOP, fill=X) LabeledEntry(targwin, 'Connection wrapup command:', self.postconnect, '26').pack(side=TOP, fill=X) LabeledEntry(targwin, 'Local delivery agent (MDA):', self.mda, '26').pack(side=TOP, fill=X) LabeledEntry(targwin, 'BSMTP output file:', self.bsmtp, '26').pack(side=TOP, fill=X) LabeledEntry(targwin, 'Listener spam-block codes:', self.antispam, '26').pack(side=TOP, fill=X) LabeledEntry(targwin, 'Pass-through properties:', self.properties, '26').pack(side=TOP, fill=X) Checkbutton(targwin, text="Use LMTP?", variable=self.lmtp).pack(side=TOP, fill=X) targwin.pack(fill=X, anchor=N) if mode != 'novice': leftwin.pack(side=LEFT, fill=X, anchor=N) rightwin = Frame(self) else: rightwin = self optwin = Frame(rightwin, relief=RAISED, bd=5) Label(optwin, text="Processing Options").pack(side=TOP) Checkbutton(optwin, text="Suppress deletion of messages after reading", variable=self.keep).pack(side=TOP, anchor=W) Checkbutton(optwin, text="Fetch old messages as well as new", variable=self.fetchall).pack(side=TOP, anchor=W) if mode != 'novice': Checkbutton(optwin, text="Flush seen messages before retrieval", variable=self.flush).pack(side=TOP, anchor=W) Checkbutton(optwin, text="Flush oversized messages before retrieval", variable=self.limitflush).pack(side=TOP, anchor=W) Checkbutton(optwin, text="Rewrite To/Cc/Bcc messages to enable reply", variable=self.rewrite).pack(side=TOP, anchor=W) Checkbutton(optwin, text="Force CR/LF at end of each line", variable=self.forcecr).pack(side=TOP, anchor=W) Checkbutton(optwin, text="Strip CR from end of each line", variable=self.stripcr).pack(side=TOP, anchor=W) Checkbutton(optwin, text="Pass 8 bits even though SMTP says 7BIT", variable=self.pass8bits).pack(side=TOP, anchor=W) Checkbutton(optwin, text="Undo MIME armoring on header and body", variable=self.mimedecode).pack(side=TOP, anchor=W) Checkbutton(optwin, text="Drop Status lines from forwarded messages", variable=self.dropstatus).pack(side=TOP, anchor=W) Checkbutton(optwin, text="Drop Delivered-To lines from forwarded messages", variable=self.dropdelivered).pack(side=TOP, anchor=W) optwin.pack(fill=X) if mode != 'novice': limwin = Frame(rightwin, relief=RAISED, bd=5) Label(limwin, text="Resource Limits").pack(side=TOP) LabeledEntry(limwin, 'Message size limit:', self.limit, '30').pack(side=TOP, fill=X) LabeledEntry(limwin, 'Size warning interval:', self.warnings, '30').pack(side=TOP, fill=X) LabeledEntry(limwin, 'Max messages to fetch per poll:', self.fetchlimit, '30').pack(side=TOP, fill=X) LabeledEntry(limwin, 'Max message sizes to fetch per transaction:', self.fetchsizelimit, '30').pack(side=TOP, fill=X) if self.parent.server.protocol not in ('ETRN', 'ODMR'): LabeledEntry(limwin, 'Use fast UIDL:', self.fastuidl, '30').pack(side=TOP, fill=X) LabeledEntry(limwin, 'Max messages to forward per poll:', self.batchlimit, '30').pack(side=TOP, fill=X) if self.parent.server.protocol not in ('ETRN', 'ODMR'): LabeledEntry(limwin, 'Interval between expunges:', self.expunge, '30').pack(side=TOP, fill=X) Checkbutton(limwin, text="Idle after each poll (IMAP only)", variable=self.idle).pack(side=TOP, anchor=W) limwin.pack(fill=X) if self.parent.server.protocol == 'IMAP': foldwin = Frame(rightwin, relief=RAISED, bd=5) Label(foldwin, text="Remote folders (IMAP only)").pack(side=TOP) ListEdit("New folder:", self.user.mailboxes, None, None, foldwin, None) foldwin.pack(fill=X, anchor=N) if mode != 'novice': rightwin.pack(side=LEFT) else: self.pack() # # Top-level window that offers either novice or expert mode # (but not both at once; it disappears when one is selected). # class Configurator(Frame): def __init__(self, outfile, master, onexit, parent): Frame.__init__(self, master) self.outfile = outfile self.onexit = onexit self.parent = parent self.master.title('fetchmail configurator') self.master.iconname('fetchmail configurator') Pack.config(self) self.keepalive = [] # Use this to anchor the PhotoImage object make_icon_window(self, fetchmail_icon) Message(self, text=""" Use `Novice Configuration' for basic fetchmail setup; with this, you can easily set up a single-drop connection to one remote mail server. """, width=600).pack(side=TOP) Button(self, text='Novice Configuration', fg='blue', command=self.novice).pack() Message(self, text=""" Use `Expert Configuration' for advanced fetchmail setup, including multiple-site or multidrop connections. """, width=600).pack(side=TOP) Button(self, text='Expert Configuration', fg='blue', command=self.expert).pack() Message(self, text=""" Or you can just select `Quit' to leave the configurator now and return to the main panel. """, width=600).pack(side=TOP) Button(self, text='Quit', fg='blue', command=self.leave).pack() master.protocol("WM_DELETE_WINDOW", self.leave) def novice(self): self.master.destroy() ConfigurationEdit(Fetchmailrc, self.outfile, Toplevel(), self.onexit).edit('novice') def expert(self): self.master.destroy() ConfigurationEdit(Fetchmailrc, self.outfile, Toplevel(), self.onexit).edit('expert') def leave(self): self.master.destroy() self.onexit() # Run a command in a scrolling text widget, displaying its output class RunWindow(Frame): def __init__(self, command, master): Frame.__init__(self, master) self.master = master self.master.title('fetchmail run window') self.master.iconname('fetchmail run window') Pack.config(self) Label(self, text="Running "+command, bd=2).pack(side=TOP, pady=10) self.keepalive = [] # Use this to anchor the PhotoImage object make_icon_window(self, fetchmail_icon) # This is a scrolling text window textframe = Frame(master) scroll = Scrollbar(textframe) self.textwidget = Text(textframe, setgrid=TRUE) textframe.pack(side=TOP, expand=YES, fill=BOTH) self.textwidget.config(yscrollcommand=scroll.set) self.textwidget.pack(side=LEFT, expand=YES, fill=BOTH) scroll.config(command=self.textwidget.yview) scroll.pack(side=RIGHT, fill=BOTH) Button(self.master, text='Quit', fg='blue', command=self.leave).pack() self.update() # Draw widget before executing fetchmail # Always look for a runnable command in the directory we're running in # first. This avoids some obscure version-skew errors that can occur # if you pick up an old fetchmail from the standard system locations. os.environ["PATH"] = os.path.dirname(sys.argv[0]) + ":" + os.environ["PATH"] child_stdout = os.popen(command + " 2>&1 > 8)) self.textwidget.see(END) def leave(self): self.master.destroy() # Here's where we choose either configuration or launching class MainWindow(Frame): def __init__(self, outfile, master=None): Frame.__init__(self, master) self.outfile = outfile self.master.title('fetchmail launcher') self.master.iconname('fetchmail launcher') Pack.config(self) Label(self, text='Fetchmailconf ' + VERSION + "\nrunning on " + hostname, bd=2).pack(side=TOP, pady=10) self.keepalive = [] # Use this to anchor the PhotoImage object make_icon_window(self, fetchmail_icon) self.debug = 0 ## Test icon display with the following: # icon_image = PhotoImage(data=fetchmail_icon) # Label(self, image=icon_image).pack(side=TOP, pady=10) # self.keepalive.append(icon_image) Message(self, text=""" Use `Configure fetchmail' to tell fetchmail about the remote servers it should poll (the host name, your username there, whether to use POP or IMAP, and so forth). """, width=600).pack(side=TOP) self.configbutton = Button(self, text='Configure fetchmail', fg='blue', command=self.configure) self.configbutton.pack() Message(self, text=""" Use `Run fetchmail' to run fetchmail with debugging enabled. This is a good way to test out a new configuration. """, width=600).pack(side=TOP) Button(self, text='Run fetchmail (verbose)',fg='blue', command=self.test).pack() Message(self, text=""" Use `Run fetchmail' to run fetchmail in foreground. Progress messages will be shown, but not debug messages. """, width=600).pack(side=TOP) Button(self, text='Run fetchmail (normal)', fg='blue', command=self.run).pack() Message(self, text=""" Or you can just select `Quit' to exit the launcher now. """, width=600).pack(side=TOP) Button(self, text='Quit', fg='blue', command=self.leave).pack() def configure(self): self.configbutton.configure(state=DISABLED) Configurator(self.outfile, Toplevel(), lambda self=self: self.configbutton.configure(state=NORMAL), self) def test(self): cmd = "fetchmail -N -d0 --nosyslog -v" if rcfile: cmd = cmd + " -f " + rcfile RunWindow(cmd, Toplevel()) def run(self): cmd = "fetchmail -N -d0" if rcfile: cmd = cmd + " -f " + rcfile RunWindow(cmd, Toplevel()) def leave(self): self.quit() # Functions for turning a dictionary into an instantiated object tree. def intersect(list1, list2): # Compute set intersection of lists res = [] for x in list1: if x in list2: res.append(x) return res def setdiff(list1, list2): # Compute set difference of lists res = [] for x in list1: if not x in list2: res.append(x) return res def copy_instance(toclass, fromdict): # Initialize a class object of given type from a conformant dictionary. for fld in list(fromdict.keys()): if not fld in dictmembers: dictmembers.append(fld) # The `optional' fields are the ones we can ignore for purposes of # conformability checking; they'll still get copied if they are # present in the dictionary. optional = ('interface', 'monitor', 'esmtpname', 'esmtppassword', 'ssl', 'sslkey', 'sslcert', 'sslproto', 'sslcertck', 'sslcertpath', 'sslcommonname', 'sslfingerprint', 'showdots', 'ssldefault') class_sig = setdiff(list(toclass.__dict__.keys()), optional) class_sig.sort() dict_keys = setdiff(list(fromdict.keys()), optional) dict_keys.sort() common = intersect(class_sig, dict_keys) if 'typemap' in class_sig: class_sig.remove('typemap') if tuple(class_sig) != tuple(dict_keys): print("Fields don't match what fetchmailconf expected:") # print("Class signature: " + repr(class_sig)) # print("Dictionary keys: " + repr(dict_keys)) diff = setdiff(class_sig, common) if diff: print("Not matched in class `" + toclass.__class__.__name__ + "' signature: " + repr(diff)) diff = setdiff(dict_keys, common) if diff: print("Not matched in dictionary keys: " + repr(diff)) sys.exit(1) else: for x in list(fromdict.keys()): setattr(toclass, x, fromdict[x]) # # And this is the main sequence. How it works: # # First, call `fetchmail --configdump' and trap the output in a tempfile. # This should fill it with a Python initializer for a variable `fetchmailrc'. # Run execfile on the file to pull fetchmailrc into Python global space. # You don't want static data, though; you want, instead, a tree of objects # with the same data members and added appropriate methods. # # This is what the copy_instance function() is for. It tries to copy a # dictionary field by field into a class, aborting if the class and dictionary # have different data members (except for any typemap member in the class; # that one is strictly for use by the MyWidget supperclass). # # Once the object tree is set up, require user to choose novice or expert # mode and instantiate an edit object for the configuration. Class methods # will take it all from there. # # Options (not documented because they're for fetchmailconf debuggers only): # -d: Read the configuration and dump it to stdout before editing. Dump # the edited result to stdout as well. # -f: specify the run control file to read. if __name__ == '__main__': fetchmail_icon = """ R0lGODdhPAAoAPcAAP///wgICBAQEISEhIyMjJSUlKWlpa2trbW1tcbGxs7Ozufn5+/v7//39yEY GNa9tUoxKZyEe1o5KTEQAN7OxpyMhIRjUvfn3pxSKYQ5EO/Wxv/WvWtSQrVzSmtCKWspAMatnP/e xu+1jIxSKaV7Wt6ca5xSGK2EY8aUa72MY86UY617UsaMWrV7SpRjOaVrOZRaKYxSIXNCGGs5EIRC CJR7Y/+UMdbOxnNrY97Ove/Wvd7GrZyEa961jL2Ua9alc86ca7WEUntSKcaMSqVjGNZ7GGM5CNa1 jPfOnN6tc3taMffeve/WtWtaQv/OjGtSMYRzWv/erda1hM6te7WUY62MWs61jP/vzv/ntda9jL2l czEhAO/n1oyEc//elDEpGEo5EOfexpyUe+/epefevffvxnNrQpyUStbWzsbGvZyclN7ezmNjWv// 5/f33qWllNbWve/vzv//1ufnve/vvf//xvf3vefnrf//taWlc0pKMf//pbW1Y///jKWlWq2tWsbG Y///c97eUvf3Ut7nc+/3a87We8bOjOfv1u/37/f//621tb3Gxtbn52Nra87n53uUlJTv/6W9xuf3 /8bW3iExOXu11tbv/5TW/4TO/63e/zmt/1KUxlK1/2u9/wCM/73GzrXG1gBKjACE/87e72NzhCkx OaXO92OMtUql/xCE/wApUtbe57W9xnN7hHut52Ot/xBSnABKnABavQB7/2ul7zF71gBr77XO73Oc 1lqc9yFSlBApSimE/wAYOQApY0J7zlKM5wAxhABS1gBj/6W95wAhWgA5nAAYSgBS7wBS/wBK9wAp jABC5wBK/wApnABC/wApxgAhtYSMtQAQYwAp/3OE74SMxgAYxlpjvWNr70pS/wgQ3sbGzs7O1qWl 3qWl70pKe0JC/yEhlCkp/wgI/wAAEAAAIQAAKQAAOQAASgAAUgAAYwAAawAAlAAAnAAApQAArQAA zgAA1gAA5wAA9wAA/0pC/xgQ52Na9ykhe4R7zikhYxgQSjEpQgAAACwAAAAAPAAoAAAI/wABCBxI sKDBgwgTKiRIYKHDhxARIvgXsaLFhGgEUBSYoKPHjyBDihxJkuS/kwNLqlzJcuTJjQBaypxpEiVH mjhxvkyZs2fLnTd9ehxAtKjRo0ZrwhTasUsENhYHKOUpk1E3j11mxCBiQVLEBlJd2owp9iVRjwUs zMCQ5IcLD4saPVxjIKxIoGTvvqSoyFEFGTBeqEhyxAoSFR/USGKVcEGBAwDshsSr1OYTEyhQpJiS ZcoUKWOQtJDRJFSaggzUGBgoGSTlsjahlPCRIkWVKT16THHRIoqIISBIEUgAYIGBhgRbf3ytFygU FZp9UDmxQkkMCRwyZKDBQy4aApABhP8XqNwj88l7BVpQYZtF5iArWgwAgGZBq24HU7OeGhQ90PVA aKZZCiiUMJ9ArSTEwGqR8ZeXfzbV0MIIMQTBwoUdxDDfAm8sZFyDZVEF4UYSKBEBD0+k6IEFPMxH 3FzldXSea+kBgANJSOWIlIMhXZXAXv+c1WM3PuJEpH8iuhbAkv+MdENPRHaTRkdF/jiWSKCAwlKW VbbkY5Q0LgUSKExgoYBKCjCxARpdltQNKHaUoYAddnR53lVRnJLKBWh4RIEGCZx5FSOv1OLNDUVe deZHaWiZAB35fIOGNtbEUeV5oGAByzPOrBPFGt3kwEgxITACSg5oLGGLMg60oQAjaNz/oAAcN4Ai a0c3kHFDK3jYsw4g9sRzBgPLXdkRrBrQ8gsWQUxCCRZX9IJNBQ1s8IgCdeBCzBYN6IBIN2TUsQYd dXhDBxdzlAHOHHKEcocZdWwDjx8MTCmjsR2FMAstw1RyiSzHqPLALaOwk8QmzCzDCSi0xJKMMk4E Yw8389iTDT32GAKOPf7YY0Aa9tATyD3w/EGsefgmgEYUtPiChLKWQDMBJtEUgYkzH2RiTgGfTMCI Mlu0Yc85hNiDziH2tMqOGL72QY47gshLb7Fi4roELcjoQIsxWpDwQyfS2OCJMkLI4YUmyhgxSTVg CP2FHPZ80UDcieBjStNPD5LPOyZT/y0iHGiMwswexDSzRiRq6KIMJBc4M8skwKAyChia2KPH3P24 YU8/lFhOTj152OPOHuXMU4g48vCRiN/9rZGLMdS4csUu1JzDgxuipOMDHMKsAwEnq/ByzTrrZMNO OtO0k84+7KjzBjzplMJOOOOoo8846/ATxqJWinkkGUyEkMAaIezABQM3bMAEK1xEsUMDGjARRxhY xEGGHfPjEcccca6BRxhyuEMY7FCHMNDhf9140r2qRiVvdENQ3liUArzREW/0qRsRVIAGFfBADnLw gUSiYASJpMEHhilJTEnhAlGoQqYAZQ1AiqEMZ0jDGtqQImhwwA13yMMevoQAGvGhEAWHGMOAAAA7 """ # The base64 data in the string above was generated by the following procedure: # # import base64 # print(base64.encodestring(open("fetchmail.gif", "rb").read())) # # Process options try: options, arguments = getopt.getopt(sys.argv[1:], "df:hV", ["help", "version"]) except getopt.GetoptError as e: usage(str(e)) except Exception as e: raise e dump = rcfile = None for (switch, val) in options: if switch == '-d': dump = True elif switch == '-f': rcfile = val elif switch == '-h' or switch == '--help': usage(0) elif switch == '-V' or switch == '--version': print("fetchmailconf %s" % VERSION) print("Running on python", sys.version) print(""" Copyright (C) 1997 - 2003 Eric S. Raymond Copyright (C) 2005 - 2021 Matthias Andree fetchmailconf comes with ABSOLUTELY NO WARRANTY. This is free software, you are welcome to redistribute it under certain conditions. Please see the file COPYING in the source or documentation directory for details.""") sys.exit(0) if arguments: usage("Extra arguments: '" + "' '".join(arguments) + "'") if "DISPLAY" not in os.environ: sys.exit("fetchmailconf must be run under X") # Get client host's FQDN hostname = socket.gethostname() if not '.' in hostname: hostname = socket.getfqdn(hostname) # still unqualified? if not '.' in hostname: sys.exit('Cannot qualify my own hostname, "{}".\nFix /etc/hosts, see man 5 hosts, or add the host to DNS.'.format(hostname)) # Read the existing configuration. cmd = ['fetchmail', '--configdump', '--nosyslog'] if rcfile: cmd += ['-f', rcfile] try: configdump = subprocess.check_output(cmd) except Exception as e: sys.exit("Exception caught while running " + " ".join(cmd) + ": " + str(e)) os_type = '' feature_options = () fetchmailrc = {} try: exec(configdump) except Exception as e: sys.exit("Can't parse output of fetchmail --configdump:\n" + str(e)) # Compute defaults ConfigurationDefaults = Configuration() ServerDefaults = Server() UserDefaults = User() # The tricky part -- initializing objects from the configuration global # `Configuration' is the top level of the object tree we're going to mung. # The dictmembers list is used to track the set of fields the dictionary # contains; in particular, we can use it to tell whether things like the # monitor, interface, ssl, sslkey, or sslcert fields are present. dictmembers = [] Fetchmailrc = Configuration() copy_instance(Fetchmailrc, fetchmailrc) Fetchmailrc.servers = [] for server in fetchmailrc['servers']: Newsite = Server() copy_instance(Newsite, server) Fetchmailrc.servers.append(Newsite) Newsite.users = [] for user in server['users']: Newuser = User() copy_instance(Newuser, user) Newsite.users.append(Newuser) # This is a hack, if one user uses SSL, all should if Newuser.ssl: Newsite.ssldefault = True # We may want to display the configuration and quit if dump: print("This is a dump of the configuration we read:\n" + repr(Fetchmailrc)) # The theory here is that -f alone sets the rcfile location, # but -d and -f together mean the new configuration should go to stdout. if not rcfile and not dump: rcfile = os.environ["HOME"] + "/.fetchmailrc" if not have_tk: print("Python's tk (tkinter) module is missing. Please install it to use fetchmailconf.", file=sys.stderr) sys.exit(1) # OK, now run the configuration edit r = Tk() # set default icon for window manager, # need to keep a reference so it doesn't get garbage collected: fetchmail_icon_PI = PhotoImage(data=fetchmail_icon) r.call('wm', 'iconphoto', r._w, '-default', fetchmail_icon_PI) root = MainWindow(rcfile, r) root.mainloop() # The following sets edit modes for GNU EMACS # Local Variables: # mode:python # End: Listing '/jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/lib/python3.9/vendor-packages'... Stripping /usr/lib from RUNPATH in /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/bin/fetchmail Stripping /usr/lib from RPATH in /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/prototype/i386/usr/bin/fetchmail VALIDATING MANIFEST CONTENT: /jenkins/jobs/oi-userland/workspace/components/mail/fetchmail/build/manifest-i386-fetchmail.depend.res NEW PACKAGE CONTENTS ARE LOCALLY VALIDATED AND READY TO GO generating metadata: mail/fetchmail pkg://openindiana.org/mail/fetchmail@6.5.0,5.11-2024.0.0.0:20241101T203657Z PUBLISHED