cache vlc 3.0.23"Audio pitch changerPitch Shifterscaletempo_pitch OpenPitch ClosePitch audio filterЫ@scaletempo-strideStride Length-Length in milliseconds to output each strideа scaletempo-overlapOverlap Length Percentage of stride to overlapЭЬL>€?@scaletempo-searchSearch Length;Length in milliseconds to search for best overlap positionШ pitch-shift Pitch ShiftPitch shift in semitones.@С@A$.libs/libscaletempo_pitch_plugin.so“ыi(uFlac audio decoderflacflac OpenDecoder CloseDecoderaudio decoderdFlac audio encoderflacflac OpenEncoder CloseEncoderencoderd•.libs/libflac_plugin.soV’ыi€{RISTRIST stream outputaccess_output_ristristtr06OpenClose sout accessј@sout-rist-packet-size RIST target packet size (bytes)0€џџџџџџџ@sout-rist-caching#RIST data output caching size (ms)ђHaving this cache will guarantee that the packets going out are delivered at a spacing determined by the chain timestamps thus ensuring a near jitter free output. Be aware that this setting will also add to the overall latency of the stream.2€џџџџџџџ@sout-rist-buffer-size"RIST retry-buffer queue size (ms)ЙThis must match the buffer size (latency) configured on the server side. If you are not sure, leave the default of 0 which will set it the maximum value and will use about 100MB of RAM€џџџџџџџ@sout-rist-ssrc4SSRC used in RTP output (default is random, i.e. 0)•Use this setting to specify a known SSRC for the RTP header. This is only useful if your receiver acts on it. When using VLC as receiver, it is not.€џџџџџџџ€sout-rist-stream-name Stream nameJThis Stream name will be sent to the receiver using the rist RTCP channel&.libs/libaccess_output_rist_plugin.so“ыiр†dav1dDav1d video decoderdav1d OpenDecoder CloseDecodervideo decoder'”@dav1d-thread-framesFrames Threads>Max number of threads used for frame decoding, default 0=auto€dav1d-thread-tiles`dav1d-all-layers All Layers<Whether or not to display all spatial layers, default false€џџџџџџџ.libs/libdav1d_plugin.soW’ыiаJSpeexSpeex audio decoderspeex OpenDecoder CloseDecoderaudio decoderdSpeexSpeex audio encoderspeex OpenEncoder CloseEncoderencoderdSpeexSpeex audio packetizerspeexOpenPacketizer CloseDecoder packetizerd •@sout-speex-modeMode!Enforce the mode of the encoder.€џџџџџџџNarrow-band (8kHz)Wide-band (16kHz)Ultra-wideband (32kHz)@sout-speex-complexityEncoding complexity'Enforce the complexity of the encoder. `sout-speex-cbr CBR encoding^Enforce a constant bitrate encoding (CBR) instead of default variable bitrate encoding (VBR).€џџџџџџџ sout-speex-qualityEncoding quality1Enforce a quality between 0 (low) and 10 (high).A A@sout-speex-max-bitrateMaximal bitrate Enforce the maximal VBR bitrate€џџџџџџџ`sout-speex-vadVoice activity detectionREnable voice activity detection (VAD). It is automatically activated in VBR mode.€џџџџџџџ`sout-speex-dtxDiscontinuous Transmission)Enable discontinuous transmission (DTX).€џџџџџџџ.libs/libspeex_plugin.soV’ыi0‰Ulead DV audio decoder uleaddvaudioOpenCloseaudio decoder2• .libs/libuleaddvaudio_plugin.soT’ыi D PulseAudioPulseaudio audio outputpulse pulseaudiopaOpenClose audio output Ъ.libs/libpulse_plugin.so“ыiјŸSDPSession Description ProtocolsdpsdpOpenNULLaccess’.libs/libsdp_plugin.so“ыi`4 StandardStandard stream outputstream_out_standard standardstdfilehttpudpOpenClose sout stream2і€sout-standard-accessOutput access method%Output method to use for the stream.€sout-standard-mux Output muxerMuxer to use for the stream.€sout-standard-dstOutput destinationLDestination (URL) to use for the stream. Overrides path and bind parameters€sout-standard-bind,Address to bind to (helper setting for dst)address:port to bind vlc to listening incoming streams. Helper setting for dst, dst=bind+'/'+path. dst-parameter overrides this.€sout-standard-path-Filename for stream (helper setting for dst)^Filename for stream. Helper setting for dst, dst=bind+'/'+path. dst-parameter overrides this.`sout-standard-sapSAP announcing Announce this session with SAP.€џџџџџџџ€sout-standard-name Session nameXThis is the name of the session that will be announced in the SDP (Session Descriptor).€sout-standard-group€sout-standard-descriptionSession descriptionƒThis allows you to give a short description with details about the stream, that will be announced in the SDP (Session Descriptor).€sout-standard-url Session URLЌThis allows you to give a URL with more details about the stream (often the website of the streaming organization), that will be announced in the SDP (Session Descriptor).€sout-standard-emailSession emailwThis allows you to give a contact mail address for the stream, that will be announced in the SDP (Session Descriptor).€sout-standard-phone'.libs/libstream_out_standard_plugin.so “ыifT.140 text encodert140OpenCloseencoderd.libs/libt140_plugin.soV’ыiа4TheoraTheora video decodertheoratheora OpenDecoder CloseDecodervideo decoderdTheoraTheora video encodertheoratheora OpenEncoder CloseEncoderencoder–TheoraTheora video packetizertheoratheoraOpenPacketizer CloseDecoder packetizerd”@theora-postprocPost processing qualityџџџџџџџџ€џџџџџџџ@sout-theora-qualityEncoding quality}Enforce a quality between 1 (low) and 10 (high), instead of specifying a particular bitrate. This will produce a VBR stream.€џџџџџџџ.libs/libtheora_plugin.soW’ыi TranscodeTranscode stream outputstream_out_transcode transcodeOpenClose sout stream2"іVideo„encodersout-transcode-vencVideo encoderQThis is the video encoder module that will be used (and its associated options).€sout-transcode-vcodecDestination video codec+This is the video codec that will be used.@sout-transcode-vbVideo bitrate/Target bitrate of the transcoded video stream.€џџџџџџџ sout-transcode-scaleVideo scaling@Scale factor to apply to the video while transcoding (eg: 0.25)џџџџџ€sout-transcode-fpsVideo frame-rate/Target output frame rate for the video stream.`sout-transcode-hurry-up€џџџџџџџ`sout-transcode-deinterlaceDeinterlace video'Deinterlace the video before encoding.€џџџџџџџ€"sout-transcode-deinterlace-moduleDeinterlace module'Specify the deinterlace module to use. deinterlace deinterlaceffmpeg-deinterlace deinterlaceffmpeg-deinterlace@sout-transcode-width Video widthOutput video width.€џџџџџџџ@sout-transcode-height Video heightOutput video height.€џџџџџџџ@sout-transcode-maxwidthMaximum video widthMaximum output video width.€џџџџџџџ@sout-transcode-maxheightMaximum video heightMaximum output video height.€џџџџџџџ† video filtersout-transcode-vfilter Video filter‚Video filters will be applied to the video streams (after overlays are applied). You can enter a colon-separated list of filters.Audio„encodersout-transcode-aencAudio encoderQThis is the audio encoder module that will be used (and its associated options).€sout-transcode-acodecDestination audio codec+This is the audio codec that will be used.@sout-transcode-abAudio bitrate/Target bitrate of the transcoded audio stream.`€џџџџџџџ€sout-transcode-alangAudio language*This is the language of the audio stream.@sout-transcode-channelsAudio channels4Number of audio channels in the transcoded streams. @sout-transcode-samplerateAudio sample rateKSample rate of the transcoded audio stream (11250, 22500, 44100 or 48000).€Л`sout-transcode-audio-sync€џџџџџџџ† audio filtersout-transcode-afilter Audio filterŒAudio filters will be applied to the audio streams (after conversion filters are applied). You can enter a colon-separated list of filters.Overlays/Subtitles„encodersout-transcode-sencSubtitle encoderTThis is the subtitle encoder module that will be used (and its associated options).€sout-transcode-scodecDestination subtitle codec.This is the subtitle codec that will be used.`sout-transcode-soverlayDestination subtitle codec.This is the subtitle codec that will be used.€џџџџџџџ† sub sourcesout-transcode-sfilter OverlaysяThis allows you to add overlays (also known as "subpictures") on the transcoded video stream. The subpictures produced by the filters will be overlayed directly onto the video. You can specify a colon-separated list of subpicture modules.Miscellaneous@sout-transcode-threadsNumber of threads,Number of threads used for the transcoding.€џџџџџџџ@sout-transcode-pool-sizePicture pool sizebDefines how many pictures we allow to be in pool between decoder/encoder threads when threads > 0 ш`sout-transcode-high-priorityHigh priorityJRuns the optional encoder thread at the OUTPUT priority instead of VIDEO.€џџџџџџџ(.libs/libstream_out_transcode_plugin.so“ыiрыsvgsvgsvgCreateDestroytext rendererc–€svg-template-fileSVG template fileJLocation of a file holding a SVG template for automatic string conversion.libs/libsvg_plugin.soњ’ыi€JKaraokeSimple Karaoke filterkaraokeOpenNULL audio filterЫ.libs/libkaraoke_plugin.so“ыiH4VDPAUVDPAU surface conversions vdpau_chroma OutputOpen OutputClosevideo converter VDPAUVDPAU surface conversions vdpau_chroma YCbCrOpen YCbCrClosevideo converter /@vdpau-deinterlace DeinterlaceDeinterlacing algorithm€џџџџџџџџџџџBob TemporalTemporal-spatial` vdpau-ivtcInverse telecineInverse telecine€џџџџџџџ`vdpau-chroma-skipDeinterlace chroma skip4Whether temporal deinterlacing applies to luma only€џџџџџџџ vdpau-noise-reductionNoise reduction levelNoise reduction level€?@vdpau-scalingScaling qualityHigh quality scaling level .libs/libvdpau_chroma_plugin.so“ыiXƒ CAF demuxercafcafOpenClosedemuxŒ“.libs/libcaf_plugin.so\’ыip[ antiflickerantiflicker video filter antiflicker antiflickerCreateDestroy video filter/@antiflicker-window-size Window sizeNumber of frames (0 to 100) d@antiflicker-softening-sizeSoftening value4Number of frames consider for smoothening (0 to 30) .libs/libantiflicker_plugin.so“ыiˆW Audio memoryAudio memory outputamemOpenClose audio outputЪ€ amem-formatSample formatSample formatS16N@ amem-rate Sample rate Sample rateDЌм@amem-channelsChannels countChannels count .libs/libamem_plugin.soK’ыixQ RSS / AtomRSS and Atom feed display)Display a RSS or ATOM Feed on your videorssrssatom CreateFilterDestroyFilter sub source1€ rss-urls Feed URLs)RSS/Atom feed '|' (pipe) separated URLs. Position@rss-x X offset%X offset, from the left screen edge.€џџџџџџџ@rss-y Y offsetY offset, down from the top.€џџџџџџџ@ rss-positionText positionžYou can enforce the text position on the video (0=center, 1=left, 2=right, 4=top, 8=bottom; you can also use combinations of these values, eg 6 = top-right). џџџџџџџџ€џџџџџџџ CenterLeftRightTopBottom Top-Left Top-Right Bottom-Left Bottom-RightFont@ rss-opacityOpacityZOpacity (inverse of transparency) of overlay text. 0 = transparent, 255 = totally opaque.џџA rss-colorColorџColor of the text that will be rendered on the video. This must be an hexadecimal (like HTML colors). The first two chars are for red, then green, then blue. #000000 = black, #FF0000 = red, #00FF00 = green, #FFFF00 = yellow (red + green), #FFFFFF = whiteџџџџџџ№€€€РРРџџџ€џџџџџ€€€€€џ€€€џџџDefaultBlackGraySilverWhiteMaroonRedFuchsiaYellowOliveGreenTealLimePurpleNavyBlueAqua@ rss-sizeFont size, pixels<Font size, in pixels. Default is 0 (use default font size).Misc@ rss-speedSpeed of feeds@Speed of the RSS/Atom feeds in microseconds (bigger is slower). †€џџџџџџџ@ rss-length Max length6Maximum number of characters displayed on the screen.<€џџџџџџџ@rss-ttl Refresh timefNumber of seconds between each forced refresh of the feeds. 0 means that the feeds are never updated.€џџџџџџџ` rss-images Feed images"Display feed images if available.€џџџџџџџ@ rss-titleTitle display modemTitle display mode. Default is 0 (hidden) if the feed has an image and feed images are enabled, 1 otherwise.џџџџџџџџ€џџџџџџџџџџџDefault Don't showAlways visibleScroll with feed.libs/librss_plugin.so“ыiј†SRC resampler-Secret Rabbit Code (libsamplerate) resampler samplerateOpenCloseaudio converter2SRC resampler-Secret Rabbit Code (libsamplerate) resampler samplerateOpenResamplerCloseaudio resampler2Ю@src-converter-typeSample rate converter typepDifferent resampling algorithms are supported. The best one is slower, while the fast one exhibits low quality.€џџџџџџџSinc function (best quality)Sinc function (medium quality)Sinc function (fast)Zero Order Hold (fastest)Linear (fastest).libs/libsamplerate_plugin.so“ыiX7S/PDIF pass-through decoderspdif OpenDecoderNULLaudio decoderx•.libs/libspdif_plugin.soS’ыi03 FlaschenFlaschen-Taschen video output flaschen flaschenOpenClose vout display.€flaschen-display!Flaschen-Taschen display addressbIP address or hostname of the Flaschen-Taschen display. Something like ft.noise or ftkleine.noise@flaschen-widthWidth Video width€џџџџџџџ@flaschen-heightHeight Video height€џџџџџџџ.libs/libflaschen_plugin.so“ыiШHFileFile stream outputfilefilestreamfdOpenClose sout access2ј`sout-file-overwriteOverwrite existing file4If the file already exists, it will be overwritten.€џџџџџџџ`sout-file-appendAppend to file5Append to file if it exists instead of replacing it.€џџџџџџџ`sout-file-formatFormat time and date8Perform ISO C time and date formatting on the file path€џџџџџџџ`sout-file-syncSynchronous writing(Open the file with synchronous writing.€џџџџџџџ&.libs/libaccess_output_file_plugin.so“ыi€LFile File input filesystemfilefdstream FileOpen FileCloseaccess2File File input filesystem directorydirDirOpen DirCloseaccess7’€ file-cat Directory`list-special-filesList special files3Include devices and pipes when listing directories€џџџџџџџ€directory-sort.libs/libfilesystem_plugin.so“ыiА]'Audio filter for PCM format conversion audio_formatOpenNULLaudio converterЭ .libs/libaudio_format_plugin.so“ыiЈŒNullSoft demuxernsvnsvOpenClosedemux “.libs/libnsv_plugin.soZ’ыiЈX#AAC audio decoder (using libfaad2)faadOpenCloseaudio decoderd•.libs/libfaad_plugin.soT’ыiШsEBU STL subtitles decoderstlOpenClose spu decoder –.libs/libstl_plugin.soU’ыi YADPCM audio decoderadpcm OpenDecoder CloseDecoderaudio decoder2•.libs/libadpcm_plugin.soT’ыi8W VOC demuxervocOpenClosedemux “.libs/libvoc_plugin.soZ’ыihI/H.264/MPEG-4 Part 10/AVC encoder (x264 10-bit)x26410bOpenCloseencoderQ”@sout-x26410b-keyintMaximum GOP sizeЅSets maximum interval between IDR-frames. Larger values save bits, thus improving quality for a given bitrate at the cost of seeking precision. Use -1 for infinite.њ€џџџџџџџ@sout-x26410b-min-keyintMinimum GOP sizeшSets minimum interval between IDR-frames. In H.264, I-frames do not necessarily bound a closed GOP because it is allowable for a P-frame to be predicted from more frames than just the one frame before it (also see reference frame option). Therefore, I-frames are not necessarily seekable. IDR-frames restrict subsequent P-frames from referring to any frame prior to the IDR-frame. If scenecuts appear within this interval, they are still encoded as I-frames, but do not start a new GOP.€џџџџџџџ`sout-x26410b-opengop"Use recovery points to close GOPsEuse open GOP, for bluray compatibility use also bluray-compat option€џџџџџџџ`sout-x26410b-bluray-compat/Enable compatibility hacks for Blu-ray supportEnable hacks for Blu-ray support, this doesn't enforce every aspect of Blu-ray compatibility e.g. resolution, framerate, level€џџџџџџџ@sout-x26410b-scenecutExtra I-frames aggressivityЮScene-cut detection. Controls how aggressively to insert extra I-frames. With small values of scenecut, the codec often has to force an I-frame when it would exceed keyint. Good values of scenecut may find a better location for the I-frame. Large values use more I-frames than necessary, thus wasting bits. -1 disables scene-cut detection, so I-frames are inserted only every other keyint frames, which probably leads to ugly encoding artifacts. Range 1 to 100.(џџџџџџџџd`sout-x26410b-pre-scenecut€џџџџџџџ@sout-x26410b-bframesB-frames between I and PFNumber of consecutive B-frames between I and P-frames. Range 1 to 16.@sout-x26410b-b-adaptAdaptive B-frame decisionpForce the specified number of consecutive B-frames to be used, except possibly before an I-frame. Range 0 to 2.@sout-x26410b-b-bias Influence (bias) B-frames usagekBias the choice to use B-frames. Positive values cause more B-frames, negative values cause less B-frames.œџџџџџџџd€sout-x26410b-bpyramid!Keep some B-frames as referencesAllows B-frames to be used as references for predicting other frames. Keeps the middle of 2+ consecutive B-frames as a reference, and reorders frame appropriately. - none: Disabled - strict: Strictly hierarchical pyramid - normal: Non-strict (not Blu-ray compatible) normalnonestrictnormalnonestrictnormal`sout-x26410b-cabacCABACCABAC (Context-Adaptive Binary Arithmetic Coding). Slightly slows down encoding and decoding, but should save 10 to 15% bitrate.€џџџџџџџ`sout-x26410b-fullrange'Use fullrange instead of TV colorrangerTV-range is usually used colorrange, defining this to true will enable libx264 to use full colorrange on encoding€џџџџџџџ@sout-x26410b-refNumber of reference framesкNumber of previous frames used as predictors. This is effective in Anime, but seems to make little difference in live-action source material. Some decoders are unable to deal with large frameref values. Range 1 to 16.`sout-x26410b-nfSkip loop filter;Deactivate the deblocking loop filter (decreases quality).€џџџџџџџ€sout-x26410b-deblock3Loop filter AlphaC0 and Beta parameters alpha:beta‚Loop filter AlphaC0 and Beta parameters. Range -6 to 6 for both alpha and beta parameters. -6 means light filter, 6 means strong.0:0€sout-x26410b-psy-rd<Strength of psychovisual optimization, default is "1.0:0.0"First parameter controls if RD is on (subme>=6) or off. Second parameter controls if Trellis is used on psychovisual optimization, default off1.0:0.0`sout-x26410b-psyUse Psy-optimizations@Use all visual optimizations that can worsen both PSNR and SSIM€џџџџџџџ€sout-x26410b-level H.264 levelўSpecify H.264 level (as defined by Annex A of the standard). Levels are not enforced; it's up to the user to select a level compatible with the rest of the encoding options. Range 1 to 5.1 (10 to 51 is also allowed). Set to 0 for letting x264 set level.0€sout-x26410b-profileH.264 profileDSpecify H.264 profile which limits are enforced over other settingshigh baselinemainhighhigh10high422high444 baselinemainhighhigh10high422high444`sout-x26410b-interlacedInterlaced modePure-interlaced mode.€џџџџџџџ@sout-x26410b-frame-packingFrame packingbFor stereoscopic videos define frame arrangement: 0: checkerboard - pixels are alternatively from L and R 1: column alternation - L and R are interlaced by column 2: row alternation - L and R are interlaced by row 3: side by side - L is on the left, R on the right 4: top bottom - L is on top, R on bottom 5: frame alternation - one view per frameџџџџџџџџџџџџџџџџџџџџ checkerboardcolumn alternationrow alternation side by side top bottomframe alternation2D@sout-x26410b-slices!Force number of slices per frameDForce rectangular slices and is overridden by other slicing options€џџџџџџџ@sout-x26410b-slice-max-size&Limit the size of each slice in bytesBSets a maximum slice size in bytes, Includes NAL overhead in size€џџџџџџџ@sout-x26410b-slice-max-mbs,Limit the size of each slice in macroblocks/Sets a maximum number of macroblocks per slice€џџџџџџџ€sout-x26410b-hrdHRD-timing informationHRD-timing informationnonenonevbrcbrnonevbrcbr@sout-x26410b-qpSet QP–This selects the quantizer to use. Lower values result in better fidelity, but higher bitrates. 26 is a good default value. Range 0 (lossless) to 51.џџџџџџџџџџџџџџџџ3@sout-x26410b-crfQuality-based VBR)1-pass Quality-based VBR. Range 0 to 51.3@sout-x26410b-qpminMin QPBMinimum quantizer parameter. 15 to 35 seems to be a useful range. 3@sout-x26410b-qpmaxMax QPMaximum quantizer parameter.33@sout-x26410b-qpstep Max QP stepMax QP step between frames.3 sout-x26410b-ratetolAverage bitrate tolerance2Allowed variance in average bitrate (in kbits/s).€?ШB@sout-x26410b-vbv-maxrateMax local bitrate+Sets a maximum local bitrate (in kbits/s).€џџџџџџџ@sout-x26410b-vbv-bufsize VBV buffer;Averaging period for the maximum local bitrate (in kbits).€џџџџџџџ sout-x26410b-vbv-initInitial VBV buffer occupancyVSets the initial buffer occupancy as a fraction of the buffer size. Range 0.0 to 1.0.fff?€? sout-x26410b-ipratioQP factor between I and P-QP factor between I and P. Range 1.0 to 2.0.33Г?€?@ sout-x26410b-pbratioQP factor between P and B-QP factor between P and B. Range 1.0 to 2.0.ffІ?€?@@sout-x26410b-chroma-qp-offset&QP difference between chroma and luma'QP difference between chroma and luma.€џџџџџџџ@sout-x26410b-passMultipass ratecontrol’Multipass ratecontrol: - 1: First pass, creates stats file - 2: Last pass, does not overwrite stats file - 3: Nth pass, overwrites stats file  sout-x26410b-qcompQP curve compression4QP curve compression. Range 0.0 (CBR) to 1.0 (QCP).š™?€? sout-x26410b-cplxblurReduce fluctuations in QP[This reduces the fluctuations in QP before curve compression. Temporally blurs complexity. Aџџџџџ sout-x26410b-qblurReduce fluctuations in QPVThis reduces the fluctuations in QP after curve compression. Temporally blurs quants.?џџџџџ@sout-x26410b-aq-modeHow AQ distributes bitsБDefines bitdistribution mode for AQ, default 1 - 0: Disabled - 1: Current x264 default mode - 2: uses log(var)^2 instead of log(var) and attempts to adapt strength per frame sout-x26410b-aq-strengthStrength of AQ’Strength to reduce blocking and blurring in flat and textured areas, default 1.0 recommended to be between 0..2 - 0.5: weak AQ - 1.5: strong AQ€?џџџџџ€sout-x26410b-partitionsPartitions to considerгPartitions to consider in analyse mode: - none : - fast : i4x4 - normal: i4x4,p8x8,(i8x8) - slow : i4x4,p8x8,(i8x8),b8x8 - all : i4x4,p8x8,(i8x8),b8x8,p4x4 (p4x4 requires p8x8. i8x8 requires 8x8dct).normalnonefastnormalslowallNoneFastNormalSlowAll€sout-x26410b-directDirect MV prediction modeDirect MV prediction modespatialnonespatial temporalautoNoneSpatial TemporalAuto@sout-x26410b-direct-8x8Direct prediction size[Direct prediction size: - 0: 4x4 - 1: 8x8 - -1: smallest possible according to level џџџџџџџџ`sout-x26410b-weightb!Weighted prediction for B-frames"Weighted prediction for B-frames.€џџџџџџџ@sout-x26410b-weightp!Weighted prediction for P-framesZWeighted prediction for P-frames: - 0: Disabled - 1: Blind offset - 2: Smart analysis €sout-x26410b-me'Integer pixel motion estimation method;Selects the motion estimation algorithm: - dia: diamond search, radius 1 (fast) - hex: hexagonal search, radius 2 - umh: uneven multi-hexagon search (better but slower) - esa: exhaustive search (extremely slow, primarily for testing) - tesa: hadamard exhaustive search (extremely slow, primarily for testing) hexdiahexumhesatesadiahexumhesatesa@sout-x26410b-merange#Maximum motion vector search rangeбMaximum distance to search for motion estimation, measured from predicted position(s). Default of 16 is good for most footage, high motion sequences may benefit from settings between 24 and 32. Range 0 to 64.@@sout-x26410b-mvrangeMaximum motion vector lengthIMaximum motion vector length in pixels. -1 is automatic, based on level.џџџџџџџџ€џџџџџџџ@sout-x26410b-mvrange-thread%Minimum buffer space between threadsSMinimum buffer space between threads. -1 is automatic, based on number of threads.џџџџџџџџ€џџџџџџџ@sout-x26410b-subme:Subpixel motion estimation and partition decision qualityЇThis parameter controls quality versus speed tradeoffs involved in the motion estimation decision process (lower = quicker and higher = better quality). Range 1 to 9.€џџџџџџџ`sout-x26410b-b-rdo€џџџџџџџ`sout-x26410b-mixed-refs+Decide references on a per partition basisxAllows each 8x8 or 16x8 partition to independently select a reference frame, as opposed to only one ref per macroblock.€џџџџџџџ`sout-x26410b-chroma-meChroma in motion estimation4Chroma ME for subpel and mode decision in P-frames.€џџџџџџџ`sout-x26410b-bime€џџџџџџџ`sout-x26410b-8x8dct Adaptive spatial transform size4SATD-based decision for 8x8 transform in inter-MBs.€џџџџџџџ@sout-x26410b-trellisTrellis RD quantizationTrellis RD quantization: - 0: disabled - 1: enabled only on the final encode of a MB - 2: enabled on all mode decisions This requires CABAC.@sout-x26410b-lookahead)Framecount to use on frametype lookahead‡Framecount to use on frametype lookahead. Currently default can cause sync-issues on unmuxable output, like rtsp-output without ts-mux(<`sout-x26410b-intra-refreshUse Periodic Intra Refresh1Use Periodic Intra Refresh instead of IDR frames€џџџџџџџ`sout-x26410b-mbtreeUse mb-tree ratecontrol6You can disable use of Macroblock-tree on ratecontrol€џџџџџџџ`sout-x26410b-fast-pskip!Early SKIP detection on P-frames"Early SKIP detection on P-frames.€џџџџџџџ`sout-x26410b-dct-decimate%Coefficient thresholding on P-framesgCoefficient thresholding on P-frames. Eliminate dct blocks containing only a small single coefficient.€џџџџџџџ@sout-x26410b-nrNoise reduction]Dct-domain noise reduction. Adaptive pseudo-deadzone. 10 to 1000 seems to be a useful range.ш@sout-x26410b-deadzone-inter!Inter luma quantization deadzoneESet the size of the inter luma quantization deadzone. Range 0 to 32. @sout-x26410b-deadzone-intra!Intra luma quantization deadzoneESet the size of the intra luma quantization deadzone. Range 0 to 32. `sout-x26410b-non-deterministic.Non-deterministic optimizations when threaded?Slightly improve quality of SMP, at the cost of repeatability.€џџџџџџџ`sout-x26410b-asmCPU optimizations!Use assembler CPU optimizations.€џџџџџџџ`sout-x26410b-psnrPSNR computationQCompute and print PSNR stats. This has no effect on the actual encoding quality.€џџџџџџџ`sout-x26410b-ssimSSIM computationQCompute and print SSIM stats. This has no effect on the actual encoding quality.€џџџџџџџ`sout-x26410b-quiet Quiet mode Quiet mode€џџџџџџџ@sout-x26410b-sps-idSPS and PPS id numbersSSet SPS and PPS id numbers to allow concatenating streams with different settings.€џџџџџџџ`sout-x26410b-audAccess unit delimiters*Generate access unit delimiter NAL units.€џџџџџџџ`sout-x26410b-verbose StatisticsPrint stats for each frame.€џџџџџџџ€sout-x26410b-statsFilename for 2 pass stats file8Filename for 2 pass stats file for multi-pass encoding.x264_2pass.log€sout-x26410b-presetDefault preset setting usedDefault preset setting used ultrafast superfast veryfastfasterfastmediumslowslower veryslowplacebo ultrafast superfast veryfastfasterfastmediumslowslower veryslowplacebo€sout-x26410b-tuneDefault tune setting usedDefault tune setting usedfilm animationgrain stillimagepsnrssim fastdecode zerolatencyfilm animationgrain stillimagepsnrssim fastdecode zerolatency€sout-x26410b-optionsx264 advanced options7x264 advanced options, in the form {opt=val,op2=val2}..libs/libx26410b_plugin.soW’ыi@ё WAV demuxerwavOpenClosedemuxŽ“.libs/libwav_plugin.soZ’ыiq glSpectrum!3D OpenGL spectrum visualization glspectrum glspectrumOpenClosevisualizationЬ@glspectrum-width Video width2The width of the visualization window, in pixels.€џџџџџџџ@glspectrum-height Video height3The height of the visualization window, in pixels.,€џџџџџџџ.libs/libglspectrum_plugin.so“ыix MMS#Microsoft Media Server (MMS) input access_mmsmmsmmsummstmmshOpenCloseaccessџџџџ’@ mms-timeoutTCP/UDP timeout (ms)ŠAmount of time (in ms) to wait before aborting network reception of data. Note that there will be 10 retries before completely giving up.ˆ€џџџџџџџ`mms-allForce selection of all streamssMMS streams can contain several elementary streams, with different bitrates. You can choose to select all of them.€џџџџџџџ@mms-maxbitrateMaximum bitrate=Select the stream with the maximum bitrate under that limit.€џџџџџџџ€ mmsh-proxy.libs/libaccess_mms_plugin.so“ыiшWEBVTT decoderWEBVTT subtitles decoderwebvttwebvtt_OpenDecoderwebvtt_CloseDecoder spu decoder WEBVTTWEBVTT subtitles parserwebvtt webvttstreamwebvtt_OpenDemuxStreamwebvtt_CloseDemuxdemuxWEBVTTWEBVTT subtitles parserwebvttwebvttwebvtt_OpenDemuxwebvtt_CloseDemuxdemux –““.libs/libwebvtt_plugin.so “ыiЈHDMV TextST subtitles decodertextstOpenClose spu decoder –.libs/libtextst_plugin.soV’ыiрG Motion blurMotion blur filter motionblurblurCreateDestroy video filter/@ blur-factorBlur factor (1-127)&The degree of blurring from 1 to 127.P.libs/libmotionblur_plugin.so“ыiшGWaveWave video filterwavewaveCreateDestroy video filter/.libs/libwave_plugin.so“ыi6 X windowX11 video window (XCB) xcb_windowOpenClose vout window DrawableEmbedded window video xcb_window embed-xidEmOpenEmClose vout windowF .`x11-altfullscreen€џџџџџџџ`xvideo-altfullscreen€џџџџџџџ`xvmc-altfullscreen€џџџџџџџ`glx-altfullscreen€џџџџџџџ.€ x11-display X11 displayZVideo will be rendered with this X11 display. If empty, the default display will be used.@ drawable-xidX11 window ID[Video will be embedded in this pre-existing window. If zero, a new window will be created.€џџџџџџџ.libs/libxcb_window_plugin.so“ыi•Logger File loggerfileOpenCloseloggerZ` file-logging Log to file%Log all VLC messages to a text file.€џџџџџџџlogfile Log filenameSpecify the log filename.€logmode Log formatSpecify the logging format.texttexthtmlTextHTML@ log-verbose VerbosityVSelect the logging verbosity or default to use the same verbosity given by --verbose.џџџџџџџџ€џџџџџџџџџџџDefaultInfoErrorWarningDebug.libs/libfile_logger_plugin.so “ыiKDirac packetizerdiracOpenClose packetizer2љ$.libs/libpacketizer_dirac_plugin.soё’ыihˆVobsub subtitles parservobsubvobsub subtitleOpenClosedemux“.libs/libvobsub_plugin.soZ’ыimHTTP(S) HTTP inputhttphttpunsvitpcicyxOpenCloseaccess’`http-reconnectAuto re-connectMAutomatically try to reconnect to the stream in case of a sudden disconnect.€џџџџџџџ.libs/libhttp_plugin.so“ыiиˆTwolameLibtwolame audio encodertwolame OpenEncoder CloseEncoderencoderx• sout-twolame-qualityEncoding quality‘Force a specific encoding quality between 0.0 (high) and 50.0 (low), instead of specifying a particular bitrate. This will produce a VBR stream.џџџџџ@sout-twolame-mode Stereo mode!Handling mode for stereo streams€џџџџџџџStereo Dual mono Joint stereo`sout-twolame-vbr VBR mode@Use Variable BitRate. Default is to use Constant BitRate (CBR).€џџџџџџџ@sout-twolame-psyPsycho-acoustic model!Integer from -1 (no model) to 4.€џџџџџџџ.libs/libtwolame_plugin.soW’ыiрKDMX music demuxerdmxmusOpenNULLdemux“.libs/libdmxmus_plugin.so[’ыi№F GradientGradient video filter/Apply color gradient or edge detection effects gradient gradientCreateDestroy video filter/€gradient-mode Distort mode5Distort mode, one of "gradient", "edge" and "hough". gradient gradientedgehough GradientEdgeHough@gradient-typeGradient image typeWGradient image type (0 or 1). 0 will turn the image to white while 1 will keep colors.`gradient-cartoonApply cartoon effect@Apply cartoon effect. It is only used by "gradient" and "edge".€џџџџџџџ.libs/libgradient_plugin.so“ыiР‹Gathering stream outputgathergatherOpenClose sout stream2%.libs/libstream_out_gather_plugin.so “ыiF Time code1Time code subpicture elementary stream generator timecodeOpenNULL access_demux’€ timecode-fps Frame rate Frame rate25/124/125/1 30000/100130/1242529.9730.libs/libtimecode_plugin.so“ыi HexportexportHTML playlist exportexport export-html Export_HTMLNULLplaylist exportXSPF playlist exportexport export-xspfxspf_export_playlistNULLplaylist exportM3U8 playlist exportexport export-m3u8 Export_M3U8NULLplaylist exportM3U playlist exportexport export-m3u Export_M3UNULLplaylist exportП.libs/libexport_plugin.so “ыi€mDBusD-Bus control interfacedbusOpenClose interface.libs/libdbus_plugin.so “ыi˜ŠXVideoXVideo output (XCB)xcb_xvxcb-xvxvxvideoOpenClose vout displayШ.@xvideo-adaptorXVideo adaptor numberWXVideo hardware adaptor to use. By default, VLC will use the first functional adaptor.џџџџџџџџ€џџџџџџџ EnumAdaptors@xvideo-format-idXVideo format idjXVideo image format id to use. By default, VLC will try to use the best match for the video being played.€џџџџџџџ` xvideo-shm€џџџџџџџ.libs/libxcb_xv_plugin.so“ыiЄ VisualizerVisualizer filtervisual visualizerOpenClosevisualizationЬGeneral€ effect-list Effects listyA list of visual effect, separated by commas. Current effects include: dummy, scope, spectrum, spectrometer and vuMeter. spectrum@ effect-width Video width2The width of the effects video window, in pixels. €џџџџџџџ@effect-height Video height3The height of the effects video window, in pixels.є€џџџџџџџ€effect-fft-window FFT windowAThe type of FFT window to use for spectrum-based visualizations.flatnonehannflattopblackmanharriskaiserNoneHann Flat TopBlackman-HarrisKaiser effect-kaiser-paramKaiser window parameterThe parameter alpha for the Kaiser window. Increasing alpha increases the main-lobe width and decreases the side-lobe amplitude.@@џџџџџSpectrum analyser@visual-nbbands€џџџџџџџ`visual-80-bandsShow 80 bands instead of 20Show 80 bands instead of 20€џџџџџџџ@ visual-separ€џџџџџџџ@ visual-amp€џџџџџџџ` visual-peaksDraw peaks in the analyzerDraw peaks in the analyzer€џџџџџџџ Spectrometer`spect-show-original!Enable original graphic spectrum9Enable the "flat" spectrum analyzer in the spectrometer.€џџџџџџџ`spect-show-baseDraw the base of the bandsDraw the base of the bands€џџџџџџџ@ spect-radiusBase pixel radius<Defines radius size in pixels, of base of bands(beginning).*€џџџџџџџ@spect-sectionsSpectral sections5Determines how many sections of spectrum will exist.џџџ@ spect-colorV-plane color8YUV-Color cube shifting across the V-plane ( 0 - 127 ).P€џџџџџџџ`spect-show-bandsDraw bands in the spectrometerDraw bands in the spectrometer€џџџџџџџ@spect-nbbands€џџџџџџџ`spect-80-bandsShow 80 bands instead of 20Show 80 bands instead of 20€џџџџџџџ@ spect-separ&Number of blank pixels between bands.&Number of blank pixels between bands.€џџџџџџџ@ spect-ampAmplification=This is a coefficient that modifies the height of the bands.€џџџџџџџ`spect-show-peaksDraw peaks in the analyzerDraw peaks in the analyzer€џџџџџџџ@spect-peak-widthPeak extra width7Additions or subtractions of pixels on the peak width.=€џџџџџџџ@spect-peak-height Peak height&Total pixel height of the peak items.€џџџџџџџ.libs/libvisual_plugin.so“ыixљVideo pictures blendingblendOpenClosevideo blendingd.libs/libblend_plugin.so“ыiOGG OGG demuxeroggoggOpenClosedemux2“.libs/libogg_plugin.so “ыiHУZlib decompression filterinflateOpenClosestream_filter—.libs/libinflate_plugin.so“ыi№6 Scene filterScene video filter!Send your video to picture filessceneCreateDestroy video filter /€ scene-format Image format.Format of the output images (png, jpeg, ...).png@ scene-width Image width^You can enforce the image width. By default (-1) VLC will adapt to the video characteristics.џџџџџџџџ€џџџџџџџ@ scene-height Image height_You can enforce the image height. By default (-1) VLC will adapt to the video characteristics.џџџџџџџџ€џџџџџџџ€ scene-prefixFilename prefixyPrefix of the output images filenames. Output filenames will have the "prefixNUMBER.format" form if replace is not true.scene€ scene-pathDirectory path prefixyDirectory path where images files should be saved. If not set, then images will be automatically saved in users homedir.`scene-replaceAlways write to the same file€Always write to the same file instead of creating one file per image. In this case, the number is not appended to the filename.€џџџџџџџ@ scene-ratioRecording ratioLRatio of images to record. 3 means that one image out of three is recorded.2џџџ.libs/libscene_plugin.so“ыiLAutodel'Automatically add/delete input streamsautodelautodelOpenClose sout stream2&.libs/libstream_out_autodel_plugin.so “ыih6Videolan.org's addons finder"addons.videolan.org addons finder vorepository addons.voOpenCloseaddons finderd,Videolan.org's single archive addons finder"single .vlp archive addons finder vorepositoryaddons.vo.vlpOpenDesignatedNULLaddons findereZZ&.libs/libaddonsvorepository_plugin.so “ыi@`Seek prevention demux filternoseekOpenNULL demux_filter—.libs/libnoseek_plugin.so “ыi4 Logo overlayLogo sub source)Use a local picture as logo on the videologologoOpenSubClose sub source Logo overlayLogo video filterlogologo OpenVideoClose video filter 1Œ logo-fileLogo filenamesЌFull path of the image files to use. Format is [,[,]][;[,[,]]][;...]. If you only have one file, simply enter its filename.@logo-x X coordinateEX coordinate of the logo. You can move the logo by left-clicking it.џџџџџџџџ€џџџџџџџ@logo-y Y coordinateEY coordinate of the logo. You can move the logo by left-clicking it.џџџџџџџџ€џџџџџџџ@ logo-delay!Logo individual image time in ms/Individual image display time of 0 - 60000 ms.ш€џџџџџџџ@ logo-repeatLogo animation # of loopsFNumber of loops for the logo animation. -1 = continuous, 0 = disabledџџџџџџџџ€џџџџџџџ@ logo-opacityOpacity of the logoKLogo opacity value (from 0 for full transparency to 255 for full opacity).џџ@logo-positionLogo position–Enforce the logo position on the video (0=center, 1=left, 2=right, 4=top, 8=bottom, you can also use combinations of these values, eg 6 = top-right). џџџџџџџџ€џџџџџџџ CenterLeftRightTopBottom Top-Left Top-Right Bottom-Left Bottom-Right.libs/liblogo_plugin.so“ыiаpVDPAU adjust video filter vdpau_adjustadjustOpenClose video filter/ .libs/libvdpau_adjust_plugin.so“ыiИI Adaptive(Unified adaptive streaming for DASH/HLS adaptiveOpenClosedemux “€adaptive-logicAdaptive Logic predictive nearoptimalrate fixedratelowesthighestDefault Predictive Near OptimalBandwidth AdaptiveFixed BandwidthLowest Bandwidth/QualityHighest Bandwidth/Quality@adaptive-maxwidthMaximum device widthMaximum device width€џџџџџџџ@adaptive-maxheightMaximum device heightMaximum device height€џџџџџџџ@ adaptive-bwFixed Bandwidth in KiB/s-Preferred bandwidth for non adaptive streamsњ€џџџџџџџ`adaptive-use-accessUse regular HTTP modules6Connect using HTTP access instead of custom HTTP code€џџџџџџџ@adaptive-livedelayLive Playback delay (ms))Tradeoff between stability and real time˜:€џџџџџџџ@adaptive-maxbufferMax buffering (ms)0u€џџџџџџџ@adaptive-lowlatency Low latency!Overrides low latency parametersџџџџџџџџ€џџџџџџџџџџџAutoForceDisable.libs/libadaptive_plugin.so“ыiш^Dump File dumper demuxdumpdumpOpenClosedemux“„ sout accessdemuxdump-access Dump module Dump modulefiledemuxdump-fileDump filename9Name of the file to which the raw stream will be dumped.stream-demux.dump`demuxdump-appendAppend to existing file8If the file already exists, it will not be overwritten.€џџџџџџџ.libs/libdemuxdump_plugin.soY’ыi€8Stream prefetch filter prefetchOpenClosestream_filter—@prefetch-buffer-size Buffer sizePrefetch buffer size (KiB)@@prefetch-read-size Read size&Prefetch background read size (bytes) @prefetch-seek-thresholdSeek threshold(Prefetch forward seek threshold (bytes)@.libs/libprefetch_plugin.so“ыi]APE/ID3 tags-skipping filter skiptagsOpenClosestream_filter—.libs/libskiptags_plugin.soљ’ыiиFVideo scaling filterscale OpenFilterNULLvideo converter .libs/libscale_plugin.so“ыiа4Puzzle%Puzzle interactive game video filterpuzzleOpenClose video filter /@ puzzle-rowsNumber of puzzle rowsNumber of puzzle rows*@ puzzle-colsNumber of puzzle columnsNumber of puzzle columns*@puzzle-borderBorderUnshuffled Border width.(`puzzle-previewSmall previewShow small preview.€џџџџџџџ@puzzle-preview-sizeSmall preview size-Show small preview size (percent of source).d@puzzle-shape-sizePiece edge shape size)Size of the curve along the piece's edgeZd@puzzle-auto-shuffle Auto shuffleAuto shuffle delay during game0u@puzzle-auto-solve Auto solveAuto solve delay during game0u@puzzle-rotation Rotation+Rotation parameter: none;180;90-270;mirror€џџџџџџџ00/180 0/90/180/2700/90/180/270/mirror@ puzzle-mode Game modeASelect game mode variation from jigsaw puzzle to sliding puzzle.€џџџџџџџjigsaw puzzlesliding puzzle swap puzzleexchange puzzle.libs/libpuzzle_plugin.so“ыi­SoX ResamplersoxrsoxrOpenConverterCloseaudio converterSoX ResamplersoxrsoxrsoxrOpenResamplerCloseaudio resamplerЮ@soxr-resampler-qualityResampling quality€џџџџџџџQuick cubic interpolation Low 16-bit with larger roll-off#Medium 16-bit with medium roll-off High qualityVery high quality.libs/libsoxr_plugin.so“ыiIMPEG-I/II video demuxermpgvmpgvOpenClosedemux“.libs/libmpgv_plugin.sod’ыiˆ6DummyDummy encoderedummydummy OpenEncoder CloseEncoderencoder.libs/libedummy_plugin.soS’ыi 4RTPReal-Time Protocol (RTP) inputrtpdccprtptcprtpudpliteOpenClose access_demux “@ rtcp-portRTCP (local) portfRTCP packets will be received on this transport protocol port. If zero, multiplexed RTP/RTCP is used.џџ€ srtp-keySRTP key (hexadecimal)•RTP packets will be authenticated and deciphered with this Secure RTP master shared secret key. This must be a 32-character-long hexadecimal string.€ srtp-saltSRTP salt (hexadecimal)kSecure RTP requires a (non-secret) master salt value. This must be a 28-character-long hexadecimal string.@ rtp-max-srcMaximum RTP sources<How many distinct active RTP sources are allowed at a time.џ@ rtp-timeoutRTP source timeout (sec)<How long to wait for any packet before a source is expired.€џџџџџџџ@rtp-max-dropout$Maximum RTP sequence number dropout‚RTP packets will be discarded if they are too much ahead (i.e. in the future) by this many packets from the last received packet.И џ@rtp-max-misorder(Maximum RTP sequence number misordering€RTP packets will be discarded if they are too far behind (i.e. in the past) by this many packets from the last received packet.dџ€rtp-dynamic-pt0RTP payload format assumed for dynamic payloads—This payload format will be assumed for dynamic payload types (between 96 and 127) if it can't be determined otherwise with out-of-band mappings (SDP)theoraTheora Encoded Video.libs/librtp_plugin.so“ыiирHotkeysHotkeys management interfacehotkeysOpenClose interfaceh.libs/libhotkeys_plugin.so “ыiјЌ%MPEG audio layer I/II/III packetizer mpegaudioOpenClose packetizer •(.libs/libpacketizer_mpegaudio_plugin.soё’ыiWFPS ConverterFPS conversion video filterfpsfpsOpenClose video filter/€fps-fps Frame rate Frame rate.libs/libfps_plugin.so“ыiЈ7File keystore (plaintext)4Secrets are stored on a file without any encryptionfilefile_plaintextOpenClose keystoreZkeystore-file!.libs/libfile_keystore_plugin.so “ыi№[Edge detectionEdge detection video filter9Detects edges in the frame and highlights them in white.edgedetectionOpenClose video filter/!.libs/libedgedetection_plugin.so“ыi№FStatsStats encoder functionstatsstats OpenEncoderNULLencoderStatsStats demux functionstatsstats OpenDemux CloseDemuxdemuxStatsStats decoder functionstatsstats OpenDecoderNULL spu decoderStatsStats decoder functionstatsstats OpenDecoderNULLaudio decoderStatsStats decoder functionstatsstats OpenDecoderNULLvideo decoderStats decoderStats decoderStats decoder Stats demux.libs/libstats_plugin.so “ыixJ)MPEG I/II video decoder (using libmpeg2) libmpeg2 libmpeg2 OpenDecoder CloseDecodervideo decoder2”.libs/liblibmpeg2_plugin.soT’ыi@Magnify&Magnify/Zoom interactive video filtermagnifyCreateDestroy video filter/.libs/libmagnify_plugin.so“ыi`WRaw video encoder for RTP rtpvideo rtpvideo OpenEncoderNULLencoder2”.libs/librtpvideo_plugin.soT’ыi`3DVDV (Digital Video) demuxerrawdvrawdvOpenClosedemux“`rawdv-hurry-up Hurry upNThe demuxer will advance timestamps if the input can't keep up with the rate.€џџџџџџџ.libs/librawdv_plugin.soY’ыiаHUDPUDP stream outputudpudpOpenClose sout accessј@sout-udp-cachingCaching value (ms)ZDefault caching value for outbound UDP streams. This value should be set in milliseconds.,€џџџџџџџ@sout-udp-groupGroup packetsТPackets can be sent one by one at the right time or by groups. You can choose the number of packets that will be sent at a time. It helps reducing the scheduling load on heavily-loaded systems.€џџџџџџџ%.libs/libaccess_output_udp_plugin.so“ыiЈ^SVCD subtitles$Philips OGT (SVCD subtitle) decodersvcdsub DecoderOpen DecoderClose spu decoder2SVCD subtitles'Philips OGT (SVCD subtitle) packetizersvcdsubPacketizerOpen DecoderClose packetizer2–@svcdsub-debug€џџџџџџџ.libs/libsvcdsub_plugin.soV’ыiШGDelayDelay a streamdelaydelayOpenClose sout stream2і@sout-delay-idElementary Stream ID9Specify an identifier integer for this elementary stream€џџџџџџџ@sout-delay-delayDelay of the ES (ms)eSpecify a delay (in ms) for this elementary stream. Positive means delay and negative means advance.€џџџџџџџ$.libs/libstream_out_delay_plugin.so “ыiШ6 MPEG VideoMPEG-I/II video packetizer mpegvideoOpenClose packetizer2љ`!packetizer-mpegvideo-sync-iframeSync on Intra Frame‡Normally the packetizer would sync on the next full frame. This flags instructs the packetizer to sync on the first Intra Frame found.€џџџџџџџ(.libs/libpacketizer_mpegvideo_plugin.so№’ыi(ŠDolby Surround decoder2Simple decoder for Dolby Surround encoded streamsdolbyCreateDestroyaudio converter•*.libs/libdolby_surround_decoder_plugin.so“ыiаM Console logConsole loggerconsoleOpenNULLlogger Z`qquiet Be quiet&Turn off all messages on the console.€џџџџџџџ".libs/libconsole_logger_plugin.so “ыi7MLP/TrueHD parsermlpOpenClose packetizer2љ".libs/libpacketizer_mlp_plugin.soё’ыiˆ BlendbenchBlending benchmark filter blendbenchCreateDestroy video filter / Benchmarking@blendbench-loopsNumber of time to blend/The number of time the blend will be performedш€џџџџџџџ@blendbench-alphaAlpha of the blended image,Alpha with which the blend image is blended€џ Base imageŒblendbench-base-imageImage to be blended onto+The image which will be used to blend onto€blendbench-base-chromaChroma for the base image.Chroma which the base image will be loaded inI420 Blend imageŒblendbench-blend-imageImage which will be blended&The image blended onto the base image€blendbench-blend-chromaChroma for the blend image/Chroma which the blend image will be loaded inYUVA.libs/libblendbench_plugin.so“ыipKSCTE-27SCTE-27 decoderscte27OpenClose spu decoder3–.libs/libscte27_plugin.soU’ыiјv LuaLua interpreterlualuaintf Open_LuaIntfClose_LuaIntf interfaceLuaLua interpreterluavlc_sd_probe_OpenNULLservices probedLuaLua SD Modulelualuasd Open_LuaSD Close_LuaSDservices_discoveryLua ExtensionLua Extensionlua luaextensionOpen_ExtensionClose_Extension extensionLua Art Fetch artwork using lua scriptsluaFindArtNULL art finder Lua PlaylistLua Playlist Parser Interfacelua luaplaylistImport_LuaPlaylistClose_LuaPlayliststream_filterLua Meta Reader!Read meta data using lua scriptslua ReadMetaNULL meta reader Lua Meta Fetcher"Fetch meta data using lua scriptslua FetchMetaNULL meta fetcher Lua Lua Telnetlua luatelnettelnetOpen_LuaTelnetClose_LuaIntf interfaceLuaCommand-line interfacelualuacliluarcclirc Open_LuaCLIClose_LuaIntf interfaceLua Lua HTTPlualuahttphttp Open_LuaHTTPClose_LuaIntf interfacef€ lua-intfLua interfaceLua interface module to loaddummy€ lua-configLua interface configurationpLua interface configuration string. Format is: '[""] = {