# Makefile.in generated by automake 1.16.5 from Makefile.am.
# Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994-2021 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# $Id$

# $Id$

# $Id$
VPATH = /jenkins/jobs/oi-userland/workspace/components/library/heimdal/heimdal-7.8.0
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/heimdal
pkgincludedir = $(includedir)/heimdal
pkglibdir = $(libdir)/heimdal
pkglibexecdir = $(libexecdir)/heimdal
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-pc-solaris2.11
host_triplet = x86_64-pc-solaris2.11
am__append_1 = doc
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/cf/aix.m4 \
	$(top_srcdir)/cf/auth-modules.m4 \
	$(top_srcdir)/cf/broken-glob.m4 \
	$(top_srcdir)/cf/broken-realloc.m4 \
	$(top_srcdir)/cf/broken-snprintf.m4 $(top_srcdir)/cf/broken.m4 \
	$(top_srcdir)/cf/broken2.m4 $(top_srcdir)/cf/c-attribute.m4 \
	$(top_srcdir)/cf/capabilities.m4 \
	$(top_srcdir)/cf/check-compile-et.m4 \
	$(top_srcdir)/cf/check-getpwnam_r-posix.m4 \
	$(top_srcdir)/cf/check-man.m4 \
	$(top_srcdir)/cf/check-netinet-ip-and-tcp.m4 \
	$(top_srcdir)/cf/check-type-extra.m4 \
	$(top_srcdir)/cf/check-var.m4 $(top_srcdir)/cf/crypto.m4 \
	$(top_srcdir)/cf/db.m4 $(top_srcdir)/cf/destdirs.m4 \
	$(top_srcdir)/cf/dispatch.m4 $(top_srcdir)/cf/dlopen.m4 \
	$(top_srcdir)/cf/find-func-no-libs.m4 \
	$(top_srcdir)/cf/find-func-no-libs2.m4 \
	$(top_srcdir)/cf/find-func.m4 \
	$(top_srcdir)/cf/find-if-not-broken.m4 \
	$(top_srcdir)/cf/framework-security.m4 \
	$(top_srcdir)/cf/have-struct-field.m4 \
	$(top_srcdir)/cf/have-type.m4 $(top_srcdir)/cf/irix.m4 \
	$(top_srcdir)/cf/krb-bigendian.m4 \
	$(top_srcdir)/cf/krb-func-getlogin.m4 \
	$(top_srcdir)/cf/krb-ipv6.m4 $(top_srcdir)/cf/krb-prog-ln-s.m4 \
	$(top_srcdir)/cf/krb-prog-perl.m4 \
	$(top_srcdir)/cf/krb-readline.m4 \
	$(top_srcdir)/cf/krb-struct-spwd.m4 \
	$(top_srcdir)/cf/krb-struct-winsize.m4 \
	$(top_srcdir)/cf/largefile.m4 $(top_srcdir)/cf/libtool.m4 \
	$(top_srcdir)/cf/ltoptions.m4 $(top_srcdir)/cf/ltsugar.m4 \
	$(top_srcdir)/cf/ltversion.m4 $(top_srcdir)/cf/lt~obsolete.m4 \
	$(top_srcdir)/cf/mips-abi.m4 $(top_srcdir)/cf/misc.m4 \
	$(top_srcdir)/cf/need-proto.m4 $(top_srcdir)/cf/osfc2.m4 \
	$(top_srcdir)/cf/otp.m4 $(top_srcdir)/cf/pkg.m4 \
	$(top_srcdir)/cf/proto-compat.m4 $(top_srcdir)/cf/pthreads.m4 \
	$(top_srcdir)/cf/resolv.m4 $(top_srcdir)/cf/retsigtype.m4 \
	$(top_srcdir)/cf/roken-frag.m4 \
	$(top_srcdir)/cf/socket-wrapper.m4 $(top_srcdir)/cf/sunos.m4 \
	$(top_srcdir)/cf/telnet.m4 $(top_srcdir)/cf/test-package.m4 \
	$(top_srcdir)/cf/version-script.m4 $(top_srcdir)/cf/wflags.m4 \
	$(top_srcdir)/cf/win32.m4 $(top_srcdir)/cf/with-all.m4 \
	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/include/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	cscope distdir distdir-am dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
DIST_SUBDIRS = include lib kuser kdc admin kadmin kpasswd kcm appl \
	tools tests packages etc po doc
am__DIST_COMMON = $(srcdir)/Makefile.in \
	$(top_srcdir)/Makefile.am.common \
	$(top_srcdir)/cf/Makefile.am.common ChangeLog NEWS README TODO \
	compile config.guess config.sub install-sh ltmain.sh missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
      && rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
DIST_TARGETS = dist-gzip
# Exists only to be overridden by the user if desired.
AM_DISTCHECK_DVI_TARGET = dvi
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = ${SHELL} '/jenkins/jobs/oi-userland/workspace/components/library/heimdal/heimdal-7.8.0/missing' aclocal-1.16
AIX_EXTRA_KAFS = 
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 1
AR = ar
AS = as
ASN1_COMPILE = $(top_builddir)/lib/asn1/asn1_compile$(EXEEXT)
ASN1_COMPILE_DEP = $(ASN1_COMPILE)
AUTOCONF = ${SHELL} '/jenkins/jobs/oi-userland/workspace/components/library/heimdal/heimdal-7.8.0/missing' autoconf
AUTOHEADER = ${SHELL} '/jenkins/jobs/oi-userland/workspace/components/library/heimdal/heimdal-7.8.0/missing' autoheader
AUTOMAKE = ${SHELL} '/jenkins/jobs/oi-userland/workspace/components/library/heimdal/heimdal-7.8.0/missing' automake-1.16
AWK = gawk
CANONICAL_HOST = x86_64-pc-solaris2.11
CAPNG_CFLAGS = 
CAPNG_LIBS = 
CATMAN = /usr/bin/groff -Tascii -mdoc $< > $@
CATMANEXT = $$section
CC = /usr/gcc/14/bin/gcc 
CCDEPMODE = depmode=gcc3
CFLAGS = -m64 -O3  -Wno-error=implicit-function-declaration -D_REENTRANT -D_TS_ERRNO
CLANG_FORMAT = clang-format
COMPILE_ET = compile_et
CPP = /usr/gcc/14/bin/gcc -E
CPPFLAGS = -I/usr/include/et  -D_LARGE_FILES=
CSCOPE = cscope
CTAGS = ctags
CYGPATH_W = echo
DB1LIB =  
DB3LIB =  -ldb-5
DBHEADER = 
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DIR_com_err = 
DIR_hdbdir = /var/heimdal
DIR_roken = roken
DLLTOOL = false
DSYMUTIL = 
DUMPBIN = 
ECHO_C = \c
ECHO_N = 
ECHO_T = 
EGREP = /usr/bin/ggrep -E
ENABLE_AFS_STRING_TO_KEY = 1
ETAGS = etags
EXEEXT = 
FGREP = /usr/bin/ggrep -F
FILECMD = file
GCD_MIG = no
GREP = /usr/bin/ggrep
GROFF = /usr/bin/groff
INCLUDES_roken = -I$(top_builddir)/lib/roken -I$(top_srcdir)/lib/roken
INCLUDE_libedit = 
INCLUDE_libintl = 
INCLUDE_openldap = 
INCLUDE_openssl_crypto = -I/usr/include
INCLUDE_readline = -I/usr/include/readline
INCLUDE_sqlite3 = -I/usr/include
INSTALL = /usr/bin/ginstall -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = /usr/bin/ld -64
LDFLAGS = -m64
LDFLAGS_VERSION_SCRIPT = 
LEX = flex
LEXLIB = -ll 
LEX_OUTPUT_ROOT = lex.yy
LIBADD_roken = $(top_builddir)/lib/roken/libroken.la $(LIB_crypt) $(LIB_dbopen)
LIBOBJS =  ${LIBOBJDIR}getcap$U.o ${LIBOBJDIR}copyhostent$U.o ${LIBOBJDIR}ecalloc$U.o ${LIBOBJDIR}emalloc$U.o ${LIBOBJDIR}erealloc$U.o ${LIBOBJDIR}estrdup$U.o ${LIBOBJDIR}iruserok$U.o ${LIBOBJDIR}strlwr$U.o ${LIBOBJDIR}strsep_copy$U.o ${LIBOBJDIR}strupr$U.o
LIBS = -lresolv -lnsl -lsocket -lpthread 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIB_AUTH_SUBDIRS = 
LIB_bswap16 = 
LIB_bswap32 = 
LIB_bswap64 = 
LIB_com_err = -lcom_err
LIB_com_err_a = 
LIB_com_err_so = 
LIB_crypt = 
LIB_db_create = -ldb-5
LIB_dbm_firstkey = -ldb-5
LIB_dbopen = 
LIB_dispatch_async_f = 
LIB_dladdr = 
LIB_dlopen = 
LIB_dn_expand = 
LIB_dns_search = 
LIB_door_create = 
LIB_freeaddrinfo = 
LIB_gai_strerror = 
LIB_getaddrinfo = 
LIB_gethostbyname = -lnsl
LIB_gethostbyname2 = 
LIB_getnameinfo = 
LIB_getpwnam_r = 
LIB_getsockopt = 
LIB_hcrypto = $(top_builddir)/lib/hcrypto/libhcrypto.la
LIB_hcrypto_a = $(top_builddir)/lib/hcrypto/.libs/libhcrypto.a
LIB_hcrypto_appl = -lhcrypto
LIB_hcrypto_so = $(top_builddir)/lib/hcrypto/.libs/libhcrypto.so
LIB_hstrerror = 
LIB_kdb = 
LIB_libedit = 
LIB_libintl = 
LIB_loadquery = 
LIB_logout = 
LIB_logwtmp = 
LIB_openldap = 
LIB_openpty = 
LIB_openssl_crypto =  -lcrypto
LIB_otp = 
LIB_pidfile = 
LIB_readline = -L/usr/lib -lreadline 
LIB_res_ndestroy = 
LIB_res_nsearch = 
LIB_res_search = -lresolv
LIB_roken = $(top_builddir)/lib/vers/libvers.la $(top_builddir)/lib/roken/libroken.la $(LIB_crypt) $(LIB_dbopen)
LIB_security = 
LIB_setsockopt = 
LIB_socket = -lsocket
LIB_sqlite3 = -L/usr/lib -lsqlite3 
LIB_syslog = 
LIB_tgetent = -ltermcap
LIPO = 
LMDBLIB =  -llmdb
LN_S = ln -s
LTLIBOBJS =  ${LIBOBJDIR}getcap$U.lo ${LIBOBJDIR}copyhostent$U.lo ${LIBOBJDIR}ecalloc$U.lo ${LIBOBJDIR}emalloc$U.lo ${LIBOBJDIR}erealloc$U.lo ${LIBOBJDIR}estrdup$U.lo ${LIBOBJDIR}iruserok$U.lo ${LIBOBJDIR}strlwr$U.lo ${LIBOBJDIR}strsep_copy$U.lo ${LIBOBJDIR}strupr$U.lo
LT_SYS_LIBRARY_PATH = 
MAINT = #
MAKEINFO = ${SHELL} '/jenkins/jobs/oi-userland/workspace/components/library/heimdal/heimdal-7.8.0/missing' makeinfo
MANIFEST_TOOL = :
MKDIR_P = /usr/bin/gmkdir -p
NDBMLIB = -ldb-5
NM = /usr/bin/amd64/nm -p
NMEDIT = 
NO_AFS = 1
NROFF = /usr/bin/nroff
OBJDUMP = objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = heimdal
PACKAGE_BUGREPORT = https://github.com/heimdal/heimdal/issues
PACKAGE_NAME = Heimdal
PACKAGE_STRING = Heimdal 7.8.0
PACKAGE_TARNAME = heimdal
PACKAGE_URL = 
PACKAGE_VERSION = 7.8.0
PATH_SEPARATOR = :
PERL = 
PKG_CONFIG = /usr/bin/amd64/pkg-config
PTHREAD_CFLAGS = -D_REENTRANT -D_TS_ERRNO
PTHREAD_LDADD = 
PTHREAD_LIBADD = -lpthread
PYTHON = /usr/bin/python
PYTHON_EXEC_PREFIX = ${exec_prefix}
PYTHON_PLATFORM = sunos5
PYTHON_PREFIX = ${prefix}
PYTHON_VERSION = 3.9
RANLIB = ranlib
SED = /usr/bin/gsed
SET_MAKE = 
SHELL = /bin/bash
SLC = $(top_builddir)/lib/sl/slc
SLC_DEP = $(SLC)
STRIP = strip
VERSION = 7.8.0
VERSIONING = 
WFLAGS = -Wall -Wextra -Wno-sign-compare -Wno-unused-parameter -Wmissing-prototypes -Wpointer-arith -Wbad-function-cast -Wmissing-declarations -Wnested-externs -Wshadow 
WFLAGS_LITE = -Wno-extra -Wno-missing-field-initializers -Wno-strict-aliasing -Wno-shadow
YACC = bison -y
YFLAGS = 
abs_builddir = /jenkins/jobs/oi-userland/workspace/components/library/heimdal/build/amd64
abs_srcdir = /jenkins/jobs/oi-userland/workspace/components/library/heimdal/heimdal-7.8.0
abs_top_builddir = /jenkins/jobs/oi-userland/workspace/components/library/heimdal/build/amd64
abs_top_srcdir = /jenkins/jobs/oi-userland/workspace/components/library/heimdal/heimdal-7.8.0
ac_ct_AR = ar
ac_ct_CC = /usr/gcc/14/bin/gcc
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = $${TAR-tar} chof - "$$tardir"
am__untar = $${TAR-tar} xf -
bindir = /usr/heimdal/bin
build = x86_64-pc-solaris2.11
build_alias = 
build_cpu = x86_64
build_os = solaris2.11
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
db_type = lmdb
db_type_preference = lmdb db3 db1 sqlite
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dpagaix_cflags = -D_THREAD_SAFE -D_AIX_PTHREADS_D7 -D_AIX32_THREADS=1 -D_AES_SOURCE -D_AIX41 -I/usr/include/dce
dpagaix_ldadd = -L/usr/lib/threads -ldcelibc_r -ldcepthreads -lpthreads_compat lpthreads -lc_r
dpagaix_ldflags = -Wl,-bI:dfspag.exp
dvidir = ${docdir}
exec_prefix = ${prefix}
host = x86_64-pc-solaris2.11
host_alias = 
host_cpu = x86_64
host_os = solaris2.11
host_vendor = pc
htmldir = ${docdir}
includedir = /usr/heimdal/include
infodir = /usr/heimdal/share/info
install_sh = ${SHELL} /jenkins/jobs/oi-userland/workspace/components/library/heimdal/heimdal-7.8.0/install-sh
libdir = /usr/heimdal/lib/amd64
libexecdir = /usr/heimdal/libexec
localedir = /usr/share/locale
localstatedir = /var
mandir = /usr/heimdal/share/man
mkdir_p = $(MKDIR_P)
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgpyexecdir = ${pyexecdir}/heimdal
pkgpythondir = ${pythondir}/heimdal
prefix = /usr
program_transform_name = s,x,x,
psdir = ${docdir}
pyexecdir = ${PYTHON_EXEC_PREFIX}/lib/python3.9/site-packages
pythondir = ${PYTHON_PREFIX}/lib/python3.9/site-packages
runstatedir = ${localstatedir}/run
sbindir = /usr/heimdal/sbin
sharedstatedir = ${prefix}/com
srcdir = /jenkins/jobs/oi-userland/workspace/components/library/heimdal/heimdal-7.8.0
subdirs =  lib/libedit
sysconfdir = /etc/hemidal
target_alias = 
top_build_prefix = 
top_builddir = .
top_srcdir = /jenkins/jobs/oi-userland/workspace/components/library/heimdal/heimdal-7.8.0
SUFFIXES = .et .h .pc.in .pc .x .z .hx .1 .3 .5 .7 .8 .cat1 .cat3 \
	.cat5 .cat7 .cat8
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -I$(top_srcdir)/include
AM_CPPFLAGS = $(INCLUDES_roken)
ROKEN_RENAME = -DROKEN_RENAME
AM_CFLAGS = $(WFLAGS)
CP = cp
buildinclude = $(top_builddir)/include
LIB_XauReadAuth = @LIB_XauReadAuth@
LIB_el_init = @LIB_el_init@
LIB_getattr = @LIB_getattr@
LIB_getpwent_r = @LIB_getpwent_r@
LIB_odm_initialize = @LIB_odm_initialize@
LIB_setpcred = @LIB_setpcred@
INCLUDE_krb4 = @INCLUDE_krb4@
LIB_krb4 = @LIB_krb4@
libexec_heimdaldir = $(libexecdir)/heimdal
NROFF_MAN = groff -mandoc -Tascii
#LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS)
LIB_kafs = 
LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \
	$(top_builddir)/lib/asn1/libasn1.la

LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la
LIB_heimbase = $(top_builddir)/lib/base/libheimbase.la
#LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la

#silent-rules
heim_verbose = $(heim_verbose_$(V))
heim_verbose_ = $(heim_verbose_$(AM_DEFAULT_VERBOSITY))
heim_verbose_0 = @echo "  GEN    "$@;
kcm_dir = kcm
SUBDIRS = include lib kuser kdc admin kadmin kpasswd $(kcm_dir) appl \
	tools tests packages etc po $(am__append_1)
ACLOCAL_AMFLAGS = -I cf
EXTRA_DIST = \
	NTMakefile \
	windows \
	TODO \
	LICENSE \
	README \
	ChangeLog \
	ChangeLog.1998 \
	ChangeLog.1999 \
	ChangeLog.2000 \
	ChangeLog.2001 \
	ChangeLog.2002 \
	ChangeLog.2003 \
	ChangeLog.2004 \
	ChangeLog.2005 \
	ChangeLog.2006 \
	Makefile.am.common \
	autogen.sh \
	krb5.conf \
	cf/make-proto.pl \
	cf/roken-h-process.pl \
	cf/install-catman.sh \
	cf/ChangeLog \
	cf/c-function.m4 \
	cf/ChangeLog \
	cf/have-pragma-weak.m4 \
	cf/have-types.m4 \
	cf/krb-func-getcwd-broken.m4 \
	cf/krb-prog-ranlib.m4 \
	cf/krb-prog-yacc.m4 \
	cf/krb-sys-aix.m4 \
	cf/krb-sys-nextstep.m4 \
	cf/krb-version.m4 \
	cf/roken.m4 \
	cf/valgrind-suppressions \
	cf/maybe-valgrind.sh \
	cf/symbol-version.py \
	cf/w32-check-exported-symbols.pl \
	cf/w32-def-from-dll.pl \
	cf/w32-detect-vc-version.pl \
	cf/w32-hh-toc-from-info.pl \
	cf/w32-list-externs-from-objs.pl \
	cf/vararray.m4

all: all-recursive

.SUFFIXES:
.SUFFIXES: .et .h .pc.in .pc .x .z .hx .1 .3 .5 .7 .8 .cat1 .cat3 .cat5 .cat7 .cat8 .c
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
	esac;
$(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(am__empty):

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: # $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
	$(am__post_remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__post_remove_distdir)

dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

dist-zstd: distdir
	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
	$(am__post_remove_distdir)

dist-tarZ: distdir
	@echo WARNING: "Support for distribution archives compressed with" \
		       "legacy program 'compress' is deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

dist-shar: distdir
	@echo WARNING: "Support for shar distribution archives is" \
	               "deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	*.tar.zst*) \
	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
	esac
	chmod -R a-w $(distdir)
	chmod u+w $(distdir)
	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build/sub \
	  && ../../configure \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	    --srcdir=../.. --prefix="$$dc_install_base" \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-local
check: check-recursive
all-am: Makefile all-local
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-exec-local

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
.MAKE: $(am__recursive_targets) check-am install-am install-data-am \
	install-strip uninstall-am

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
	am--refresh check check-am check-local clean clean-cscope \
	clean-generic clean-libtool cscope cscopelist-am ctags \
	ctags-am dist dist-all dist-bzip2 dist-gzip dist-hook \
	dist-lzip dist-shar dist-tarZ dist-xz dist-zip dist-zstd \
	distcheck distclean distclean-generic distclean-libtool \
	distclean-tags distcleancheck distdir distuninstallcheck dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-data-hook install-dvi \
	install-dvi-am install-exec install-exec-am install-exec-local \
	install-html install-html-am install-info install-info-am \
	install-man install-pdf install-pdf-am install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
	uninstall-am uninstall-hook

.PRECIOUS: Makefile


install-suid-programs:
	@foo='$(bin_SUIDS)'; \
	for file in $$foo; do \
		x=$(DESTDIR)$(bindir)/$$file; \
		if chown 0:0 $$x && chmod u+s $$x; then :; else \
			echo "*"; \
			echo "* Failed to install $$x setuid root"; \
			echo "*"; \
		fi; \
	done

install-exec-local: install-suid-programs

codesign-all:
	@if [ X"$$CODE_SIGN_IDENTITY" != X ] ; then \
		foo='$(bin_PROGRAMS) $(sbin_PROGRAMS) $(libexec_PROGRAMS)' ; \
		for file in $$foo ; do \
			echo "CODESIGN $$file" ; \
			codesign -f -s "$$CODE_SIGN_IDENTITY" $$file || exit 1 ; \
		done ; \
	fi

all-local: codesign-all

install-build-headers:: $(include_HEADERS) $(dist_include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ) $(nobase_include_HEADERS) $(noinst_HEADERS)
	@foo='$(include_HEADERS) $(dist_include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ) $(noinst_HEADERS)'; \
	for f in $$foo; do \
		f=`basename $$f`; \
		if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \
		else file="$$f"; fi; \
		if cmp -s  $$file $(buildinclude)/$$f 2> /dev/null ; then \
		: ; else \
			echo " $(CP) $$file $(buildinclude)/$$f"; \
			$(CP) $$file $(buildinclude)/$$f || true; \
		fi ; \
	done ; \
	foo='$(nobase_include_HEADERS)'; \
	for f in $$foo; do \
		if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \
		else file="$$f"; fi; \
		$(mkdir_p) $(buildinclude)/`dirname $$f` ; \
		if cmp -s  $$file $(buildinclude)/$$f 2> /dev/null ; then \
		: ; else \
			echo " $(CP) $$file $(buildinclude)/$$f"; \
			$(CP) $$file $(buildinclude)/$$f; \
		fi ; \
	done

all-local: install-build-headers

check-local::
	@if test '$(CHECK_LOCAL)' = "no-check-local"; then \
	  foo=''; elif test '$(CHECK_LOCAL)'; then \
	  foo='$(CHECK_LOCAL)'; else \
	  foo='$(PROGRAMS)'; fi; \
	  if test "$$foo"; then \
	  failed=0; all=0; \
	  for i in $$foo; do \
	    all=`expr $$all + 1`; \
	    if (./$$i --version && ./$$i --help) > /dev/null 2>&1; then \
	      echo "PASS: $$i"; \
	    else \
	      echo "FAIL: $$i"; \
	      failed=`expr $$failed + 1`; \
	    fi; \
	  done; \
	  if test "$$failed" -eq 0; then \
	    banner="All $$all tests passed"; \
	  else \
	    banner="$$failed of $$all tests failed"; \
	  fi; \
	  dashes=`echo "$$banner" | sed s/./=/g`; \
	  echo "$$dashes"; \
	  echo "$$banner"; \
	  echo "$$dashes"; \
	  test "$$failed" -eq 0 || exit 1; \
	fi

# It's useful for debugging to format generated sources.  The default for all
# clang-format styles is to sort includes, but in many cases in-tree we really
# don't want to do that.
.x.c:
	@if [ -z "$(CLANG_FORMAT)" ]; then \
	    cmp -s $< $@ 2> /dev/null || cp $< $@; \
	else \
	    cp $< $@.tmp.c; \
            $(CLANG_FORMAT) -style='{BasedOnStyle: Chromium, SortIncludes: false}' -i $@.tmp.c; \
	    cmp -s $@.tmp.c $@ 2> /dev/null || mv $@.tmp.c $@; \
	fi

.hx.h:
	@cmp -s $< $@ 2> /dev/null || cp $< $@;
#NROFF_MAN = nroff -man
.1.cat1:
	$(NROFF_MAN) $< > $@
.3.cat3:
	$(NROFF_MAN) $< > $@
.5.cat5:
	$(NROFF_MAN) $< > $@
.7.cat7:
	$(NROFF_MAN) $< > $@
.8.cat8:
	$(NROFF_MAN) $< > $@

dist-cat1-mans:
	@foo='$(man1_MANS)'; \
	bar='$(man_MANS)'; \
	for i in $$bar; do \
	case $$i in \
	*.1) foo="$$foo $$i";; \
	esac; done ;\
	for i in $$foo; do \
		x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \
		echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \
		$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \
	done

dist-cat3-mans:
	@foo='$(man3_MANS)'; \
	bar='$(man_MANS)'; \
	for i in $$bar; do \
	case $$i in \
	*.3) foo="$$foo $$i";; \
	esac; done ;\
	for i in $$foo; do \
		x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \
		echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \
		$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \
	done

dist-cat5-mans:
	@foo='$(man5_MANS)'; \
	bar='$(man_MANS)'; \
	for i in $$bar; do \
	case $$i in \
	*.5) foo="$$foo $$i";; \
	esac; done ;\
	for i in $$foo; do \
		x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \
		echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \
		$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \
	done

dist-cat7-mans:
	@foo='$(man7_MANS)'; \
	bar='$(man_MANS)'; \
	for i in $$bar; do \
	case $$i in \
	*.7) foo="$$foo $$i";; \
	esac; done ;\
	for i in $$foo; do \
		x=`echo $$i | sed 's/\.[^.]*$$/.cat7/'`; \
		echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \
		$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \
	done

dist-cat8-mans:
	@foo='$(man8_MANS)'; \
	bar='$(man_MANS)'; \
	for i in $$bar; do \
	case $$i in \
	*.8) foo="$$foo $$i";; \
	esac; done ;\
	for i in $$foo; do \
		x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \
		echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \
		$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \
	done

dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat7-mans dist-cat8-mans

install-cat-mans:
	$(SHELL) $(top_srcdir)/cf/install-catman.sh install "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man7_MANS) $(man8_MANS)

uninstall-cat-mans:
	$(SHELL) $(top_srcdir)/cf/install-catman.sh uninstall "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man7_MANS) $(man8_MANS)

install-data-hook: install-cat-mans
uninstall-hook: uninstall-cat-mans

.et.h:
	$(COMPILE_ET) $<
.et.c:
	$(COMPILE_ET) $<

#
# Useful target for debugging
#

check-valgrind:
	tobjdir=`cd $(top_builddir) && pwd` ; \
	tsrcdir=`cd $(top_srcdir) && pwd` ; \
	env TESTS_ENVIRONMENT="$${tsrcdir}/cf/maybe-valgrind.sh -s $${tsrcdir} -o $${tobjdir}" make check

#
# Target to please samba build farm, builds distfiles in-tree.
# Will break when automake changes...
#

distdir-in-tree: $(DISTFILES) $(INFO_DEPS)
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" != .; then \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) distdir-in-tree) ; \
	  fi ; \
	done

print-distdir:
	@echo $(distdir)

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
