# Makefile.in generated by automake 1.16.2 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2020 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# libEtPan! -- a mail stuff library
#
# Copyright (C) 2007 g10 Code GmbH
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
# 3. Neither the name of the libEtPan! project nor the names of its
#    contributors may be used to endorse or promote products derived
#    from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.

# libEtPan! -- a mail stuff library
#
# Copyright (C) 2007 g10 Code GmbH
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
# 3. Neither the name of the libEtPan! project nor the names of its
#    contributors may be used to endorse or promote products derived
#    from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.

# Description of the build system
# ===============================

# The build system uses automake and autoconf mostly in the usual way.
# A typical work flow for working with the SVN version would be:

# $ autoreconf
# $ ./configure --enable-maintainer-mode
# $ make

# All Makefile.am files must contain:

# include $(top_srcdir)/rules.mk

# If BUILT_SOURCES are desired, they need to be defined *after* the
# above include by a += directive, for example:

# BUILT_SOURCES += foo.h

# This is because rules.mk defines BUILT_SOURCES for its own purposes.

# Header Link Farm
# ================

# The public header files of libetpan are scattered throughout the
# source tree and defined by libetpaninclude_HEADERS automake variables.
# (The corresponding libetpanincludedir is defined in rules.mk).  Before
# building anything else in the project, we prepare a header link farm
# in include/libetpan (this directory will be created).  The header link
# farm is generated automatically when any Makefile (or other
# configure-generated file) is modified, for example by editing
# Makefile.am in maintainer mode.  This ensures that all modifications
# to libetpaninclude_HEADERS variables are picked up properly.

# The header link farm is built using the BUILT_SOURCES mechanism of
# automake, which means that it will only be built by "make all", "make
# check" and "make install".  This means that eithr of these commands
# needs to be used before targeting individual project files works.  If
# the header link farm should be generated or updated manually, the
# following command can be used in the *top-level build directory*:

# $ rm stamp-prepare; make stamp-prepare

VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
noinst_PROGRAMS = smime$(EXEEXT) decrypt$(EXEEXT) pgp$(EXEEXT) \
	frm$(EXEEXT) frm-tree$(EXEEXT) frm-simple$(EXEEXT) \
	readmsg-simple$(EXEEXT) fetch-attachment$(EXEEXT) \
	smtpsend$(EXEEXT) readmsg-uid$(EXEEXT) readmsg$(EXEEXT) \
	compose-msg$(EXEEXT) imap-sample$(EXEEXT) mime-create$(EXEEXT) \
	mime-parse$(EXEEXT) pop-sample$(EXEEXT)
subdir = tests
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
PROGRAMS = $(noinst_PROGRAMS)
compose_msg_SOURCES = compose-msg.c
compose_msg_OBJECTS = compose-msg.$(OBJEXT)
compose_msg_LDADD = $(LDADD)
compose_msg_DEPENDENCIES = ../src/libetpan.la
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 = 
decrypt_SOURCES = decrypt.c
decrypt_OBJECTS = decrypt.$(OBJEXT)
decrypt_LDADD = $(LDADD)
decrypt_DEPENDENCIES = ../src/libetpan.la
am__objects_1 = readmsg-common.$(OBJEXT) option-parser.$(OBJEXT)
am_fetch_attachment_OBJECTS = $(am__objects_1) \
	fetch-attachment.$(OBJEXT)
fetch_attachment_OBJECTS = $(am_fetch_attachment_OBJECTS)
fetch_attachment_LDADD = $(LDADD)
fetch_attachment_DEPENDENCIES = ../src/libetpan.la
am__objects_2 = frm-common.$(OBJEXT) option-parser.$(OBJEXT)
am_frm_OBJECTS = $(am__objects_2) frm.$(OBJEXT)
frm_OBJECTS = $(am_frm_OBJECTS)
frm_LDADD = $(LDADD)
frm_DEPENDENCIES = ../src/libetpan.la
am_frm_simple_OBJECTS = $(am__objects_2) frm-simple.$(OBJEXT)
frm_simple_OBJECTS = $(am_frm_simple_OBJECTS)
frm_simple_LDADD = $(LDADD)
frm_simple_DEPENDENCIES = ../src/libetpan.la
am_frm_tree_OBJECTS = $(am__objects_2) frm-tree.$(OBJEXT)
frm_tree_OBJECTS = $(am_frm_tree_OBJECTS)
frm_tree_LDADD = $(LDADD)
frm_tree_DEPENDENCIES = ../src/libetpan.la
imap_sample_SOURCES = imap-sample.c
imap_sample_OBJECTS = imap-sample.$(OBJEXT)
imap_sample_LDADD = $(LDADD)
imap_sample_DEPENDENCIES = ../src/libetpan.la
mime_create_SOURCES = mime-create.c
mime_create_OBJECTS = mime-create.$(OBJEXT)
mime_create_LDADD = $(LDADD)
mime_create_DEPENDENCIES = ../src/libetpan.la
mime_parse_SOURCES = mime-parse.c
mime_parse_OBJECTS = mime-parse.$(OBJEXT)
mime_parse_LDADD = $(LDADD)
mime_parse_DEPENDENCIES = ../src/libetpan.la
pgp_SOURCES = pgp.c
pgp_OBJECTS = pgp.$(OBJEXT)
pgp_LDADD = $(LDADD)
pgp_DEPENDENCIES = ../src/libetpan.la
pop_sample_SOURCES = pop-sample.c
pop_sample_OBJECTS = pop-sample.$(OBJEXT)
pop_sample_LDADD = $(LDADD)
pop_sample_DEPENDENCIES = ../src/libetpan.la
am_readmsg_OBJECTS = $(am__objects_1) readmsg.$(OBJEXT)
readmsg_OBJECTS = $(am_readmsg_OBJECTS)
readmsg_LDADD = $(LDADD)
readmsg_DEPENDENCIES = ../src/libetpan.la
am_readmsg_simple_OBJECTS = $(am__objects_1) readmsg-simple.$(OBJEXT)
readmsg_simple_OBJECTS = $(am_readmsg_simple_OBJECTS)
readmsg_simple_LDADD = $(LDADD)
readmsg_simple_DEPENDENCIES = ../src/libetpan.la
am_readmsg_uid_OBJECTS = $(am__objects_1) readmsg-uid.$(OBJEXT)
readmsg_uid_OBJECTS = $(am_readmsg_uid_OBJECTS)
readmsg_uid_LDADD = $(LDADD)
readmsg_uid_DEPENDENCIES = ../src/libetpan.la
smime_SOURCES = smime.c
smime_OBJECTS = smime.$(OBJEXT)
smime_LDADD = $(LDADD)
smime_DEPENDENCIES = ../src/libetpan.la
smtpsend_SOURCES = smtpsend.c
smtpsend_OBJECTS = smtpsend.$(OBJEXT)
smtpsend_LDADD = $(LDADD)
smtpsend_DEPENDENCIES = ../src/libetpan.la
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__maybe_remake_depfiles = depfiles
am__depfiles_remade = ./$(DEPDIR)/compose-msg.Po \
	./$(DEPDIR)/decrypt.Po ./$(DEPDIR)/fetch-attachment.Po \
	./$(DEPDIR)/frm-common.Po ./$(DEPDIR)/frm-simple.Po \
	./$(DEPDIR)/frm-tree.Po ./$(DEPDIR)/frm.Po \
	./$(DEPDIR)/imap-sample.Po ./$(DEPDIR)/mime-create.Po \
	./$(DEPDIR)/mime-parse.Po ./$(DEPDIR)/option-parser.Po \
	./$(DEPDIR)/pgp.Po ./$(DEPDIR)/pop-sample.Po \
	./$(DEPDIR)/readmsg-common.Po ./$(DEPDIR)/readmsg-simple.Po \
	./$(DEPDIR)/readmsg-uid.Po ./$(DEPDIR)/readmsg.Po \
	./$(DEPDIR)/smime.Po ./$(DEPDIR)/smtpsend.Po
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo "  CC      " $@;
am__v_CC_1 = 
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo "  CCLD    " $@;
am__v_CCLD_1 = 
SOURCES = compose-msg.c decrypt.c $(fetch_attachment_SOURCES) \
	$(frm_SOURCES) $(frm_simple_SOURCES) $(frm_tree_SOURCES) \
	imap-sample.c mime-create.c mime-parse.c pgp.c pop-sample.c \
	$(readmsg_SOURCES) $(readmsg_simple_SOURCES) \
	$(readmsg_uid_SOURCES) smime.c smtpsend.c
DIST_SOURCES = compose-msg.c decrypt.c $(fetch_attachment_SOURCES) \
	$(frm_SOURCES) $(frm_simple_SOURCES) $(frm_tree_SOURCES) \
	imap-sample.c mime-create.c mime-parse.c pgp.c pop-sample.c \
	$(readmsg_SOURCES) $(readmsg_simple_SOURCES) \
	$(readmsg_uid_SOURCES) smime.c smtpsend.c
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp \
	$(top_srcdir)/rules.mk README
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
API_COMPATIBILITY = @API_COMPATIBILITY@
API_CURRENT = @API_CURRENT@
API_REVISION = @API_REVISION@
API_VERSION = @API_VERSION@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BUILD_FILEVERSION = @BUILD_FILEVERSION@
BUILD_REVISION = @BUILD_REVISION@
BUILD_TIMESTAMP = @BUILD_TIMESTAMP@
CC = @CC@
CCDEPMODE = @CCDEPMODE@

# For W32, reverse the -DLIBETPAN_DLL.  Unfortunately, CFLAGS comes
# after AM_CPPFLAGS, so we have to frob CFLAGS.
CFLAGS = @CFLAGS@ -ULIBETPAN_DLL
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DBLIB = @DBLIB@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GNUTLSLIB = @GNUTLSLIB@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSUFFIX = @LIBSUFFIX@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
RC = @RC@
REENTRANT = @REENTRANT@
SASLLIBS = @SASLLIBS@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SSLLIBS = @SSLLIBS@
STRIP = @STRIP@
VERSION = @VERSION@
VERSION_MAJOR = @VERSION_MAJOR@
VERSION_MINOR = @VERSION_MINOR@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
cfg_files = @cfg_files@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libcurlconfig = @libcurlconfig@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@

# Public header files are defined by libetpaninclude_HEADERS variables.
etpanincludedir = $(includedir)/libetpan

# We add a recursive target "prepare" which creates the desired links
# in include/libetpan from libetpan include files scattered throughout
# the source.  See also README.rules.

# We hook into the BUILT_SOURCES mechanism of automake, see Section
# "Built sources" in the automake manual for details.
BUILT_SOURCES = $(top_builddir)/stamp-prepare
EXTRA_DIST = README
AM_CPPFLAGS = -I$(top_builddir)/include
LDADD = ../src/libetpan.la
FRMCOMMON = frm-common.h frm-common.c option-parser.h option-parser.c
frm_SOURCES = $(FRMCOMMON) frm.c
frm_tree_SOURCES = $(FRMCOMMON) frm-tree.c
frm_simple_SOURCES = $(FRMCOMMON) frm-simple.c
READMSGCOMMON = readmsg-common.h readmsg-common.c option-parser.h	\
	option-parser.c

readmsg_SOURCES = $(READMSGCOMMON) readmsg.c
readmsg_simple_SOURCES = $(READMSGCOMMON) readmsg-simple.c
readmsg_uid_SOURCES = $(READMSGCOMMON) readmsg-uid.c
fetch_attachment_SOURCES = $(READMSGCOMMON) fetch-attachment.c
all: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) all-am

.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/rules.mk $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign tests/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
	esac;
$(top_srcdir)/rules.mk $(am__empty):

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

clean-noinstPROGRAMS:
	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list

compose-msg$(EXEEXT): $(compose_msg_OBJECTS) $(compose_msg_DEPENDENCIES) $(EXTRA_compose_msg_DEPENDENCIES) 
	@rm -f compose-msg$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(compose_msg_OBJECTS) $(compose_msg_LDADD) $(LIBS)

decrypt$(EXEEXT): $(decrypt_OBJECTS) $(decrypt_DEPENDENCIES) $(EXTRA_decrypt_DEPENDENCIES) 
	@rm -f decrypt$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(decrypt_OBJECTS) $(decrypt_LDADD) $(LIBS)

fetch-attachment$(EXEEXT): $(fetch_attachment_OBJECTS) $(fetch_attachment_DEPENDENCIES) $(EXTRA_fetch_attachment_DEPENDENCIES) 
	@rm -f fetch-attachment$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(fetch_attachment_OBJECTS) $(fetch_attachment_LDADD) $(LIBS)

frm$(EXEEXT): $(frm_OBJECTS) $(frm_DEPENDENCIES) $(EXTRA_frm_DEPENDENCIES) 
	@rm -f frm$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(frm_OBJECTS) $(frm_LDADD) $(LIBS)

frm-simple$(EXEEXT): $(frm_simple_OBJECTS) $(frm_simple_DEPENDENCIES) $(EXTRA_frm_simple_DEPENDENCIES) 
	@rm -f frm-simple$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(frm_simple_OBJECTS) $(frm_simple_LDADD) $(LIBS)

frm-tree$(EXEEXT): $(frm_tree_OBJECTS) $(frm_tree_DEPENDENCIES) $(EXTRA_frm_tree_DEPENDENCIES) 
	@rm -f frm-tree$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(frm_tree_OBJECTS) $(frm_tree_LDADD) $(LIBS)

imap-sample$(EXEEXT): $(imap_sample_OBJECTS) $(imap_sample_DEPENDENCIES) $(EXTRA_imap_sample_DEPENDENCIES) 
	@rm -f imap-sample$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(imap_sample_OBJECTS) $(imap_sample_LDADD) $(LIBS)

mime-create$(EXEEXT): $(mime_create_OBJECTS) $(mime_create_DEPENDENCIES) $(EXTRA_mime_create_DEPENDENCIES) 
	@rm -f mime-create$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(mime_create_OBJECTS) $(mime_create_LDADD) $(LIBS)

mime-parse$(EXEEXT): $(mime_parse_OBJECTS) $(mime_parse_DEPENDENCIES) $(EXTRA_mime_parse_DEPENDENCIES) 
	@rm -f mime-parse$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(mime_parse_OBJECTS) $(mime_parse_LDADD) $(LIBS)

pgp$(EXEEXT): $(pgp_OBJECTS) $(pgp_DEPENDENCIES) $(EXTRA_pgp_DEPENDENCIES) 
	@rm -f pgp$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(pgp_OBJECTS) $(pgp_LDADD) $(LIBS)

pop-sample$(EXEEXT): $(pop_sample_OBJECTS) $(pop_sample_DEPENDENCIES) $(EXTRA_pop_sample_DEPENDENCIES) 
	@rm -f pop-sample$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(pop_sample_OBJECTS) $(pop_sample_LDADD) $(LIBS)

readmsg$(EXEEXT): $(readmsg_OBJECTS) $(readmsg_DEPENDENCIES) $(EXTRA_readmsg_DEPENDENCIES) 
	@rm -f readmsg$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(readmsg_OBJECTS) $(readmsg_LDADD) $(LIBS)

readmsg-simple$(EXEEXT): $(readmsg_simple_OBJECTS) $(readmsg_simple_DEPENDENCIES) $(EXTRA_readmsg_simple_DEPENDENCIES) 
	@rm -f readmsg-simple$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(readmsg_simple_OBJECTS) $(readmsg_simple_LDADD) $(LIBS)

readmsg-uid$(EXEEXT): $(readmsg_uid_OBJECTS) $(readmsg_uid_DEPENDENCIES) $(EXTRA_readmsg_uid_DEPENDENCIES) 
	@rm -f readmsg-uid$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(readmsg_uid_OBJECTS) $(readmsg_uid_LDADD) $(LIBS)

smime$(EXEEXT): $(smime_OBJECTS) $(smime_DEPENDENCIES) $(EXTRA_smime_DEPENDENCIES) 
	@rm -f smime$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(smime_OBJECTS) $(smime_LDADD) $(LIBS)

smtpsend$(EXEEXT): $(smtpsend_OBJECTS) $(smtpsend_DEPENDENCIES) $(EXTRA_smtpsend_DEPENDENCIES) 
	@rm -f smtpsend$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(smtpsend_OBJECTS) $(smtpsend_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/compose-msg.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/decrypt.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fetch-attachment.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/frm-common.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/frm-simple.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/frm-tree.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/frm.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/imap-sample.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mime-create.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mime-parse.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/option-parser.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pgp.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pop-sample.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/readmsg-common.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/readmsg-simple.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/readmsg-uid.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/readmsg.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smime.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smtpsend.Po@am__quote@ # am--include-marker

$(am__depfiles_remade):
	@$(MKDIR_P) $(@D)
	@echo '# dummy' >$@-t && $(am__mv) $@-t $@

am--depfiles: $(am__depfiles_remade)

.c.o:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<

.c.obj:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.c.lo:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-am

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-am

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-am
all-am: Makefile $(PROGRAMS)
installdirs:
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-am

clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \
	mostlyclean-am

distclean: distclean-am
		-rm -f ./$(DEPDIR)/compose-msg.Po
	-rm -f ./$(DEPDIR)/decrypt.Po
	-rm -f ./$(DEPDIR)/fetch-attachment.Po
	-rm -f ./$(DEPDIR)/frm-common.Po
	-rm -f ./$(DEPDIR)/frm-simple.Po
	-rm -f ./$(DEPDIR)/frm-tree.Po
	-rm -f ./$(DEPDIR)/frm.Po
	-rm -f ./$(DEPDIR)/imap-sample.Po
	-rm -f ./$(DEPDIR)/mime-create.Po
	-rm -f ./$(DEPDIR)/mime-parse.Po
	-rm -f ./$(DEPDIR)/option-parser.Po
	-rm -f ./$(DEPDIR)/pgp.Po
	-rm -f ./$(DEPDIR)/pop-sample.Po
	-rm -f ./$(DEPDIR)/readmsg-common.Po
	-rm -f ./$(DEPDIR)/readmsg-simple.Po
	-rm -f ./$(DEPDIR)/readmsg-uid.Po
	-rm -f ./$(DEPDIR)/readmsg.Po
	-rm -f ./$(DEPDIR)/smime.Po
	-rm -f ./$(DEPDIR)/smtpsend.Po
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
		-rm -f ./$(DEPDIR)/compose-msg.Po
	-rm -f ./$(DEPDIR)/decrypt.Po
	-rm -f ./$(DEPDIR)/fetch-attachment.Po
	-rm -f ./$(DEPDIR)/frm-common.Po
	-rm -f ./$(DEPDIR)/frm-simple.Po
	-rm -f ./$(DEPDIR)/frm-tree.Po
	-rm -f ./$(DEPDIR)/frm.Po
	-rm -f ./$(DEPDIR)/imap-sample.Po
	-rm -f ./$(DEPDIR)/mime-create.Po
	-rm -f ./$(DEPDIR)/mime-parse.Po
	-rm -f ./$(DEPDIR)/option-parser.Po
	-rm -f ./$(DEPDIR)/pgp.Po
	-rm -f ./$(DEPDIR)/pop-sample.Po
	-rm -f ./$(DEPDIR)/readmsg-common.Po
	-rm -f ./$(DEPDIR)/readmsg-simple.Po
	-rm -f ./$(DEPDIR)/readmsg-uid.Po
	-rm -f ./$(DEPDIR)/readmsg.Po
	-rm -f ./$(DEPDIR)/smime.Po
	-rm -f ./$(DEPDIR)/smtpsend.Po
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am:

.MAKE: all check install install-am install-strip

.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
	clean-generic clean-libtool clean-noinstPROGRAMS cscopelist-am \
	ctags ctags-am distclean distclean-compile distclean-generic \
	distclean-libtool distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-pdf install-pdf-am \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags tags-am uninstall uninstall-am

.PRECIOUS: Makefile


# The stamp file depends on all files generated by configure.  This
# naturally includes all Makefiles which define
# libetpaninclude_HEADERS variables for public header files, which are
# the files we want.  There are some more files in this list, but we
# don't mind regenerating the header link farm a bit more often than
# necessary.  Usually you won't notice a difference as
# configure-generated files are updated very rarely.
$(top_builddir)/stamp-prepare: $(cfg_files)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) stamp-prepare-target
	touch $(top_builddir)/stamp-prepare

# This target should only be invoked in the top level directory (ie
# indirectly through $(top_builddir)/stamp-prepare).  It is
# responsible for updating the header link farm.  First, the header
# link farm is deleted by invoking the clean target in the include
# directory.  Then the header link farm is (re-)generated by
# exploiting the recursive targets mechanism provided by automake.
# Note that this is exploiting automake internals (automake currently
# provides no official hooks for recursive targets).
stamp-prepare-target: $(cfg_files)
	cd include && $(MAKE) $(AM_MAKEFLAGS) clean
	$(MAKE) $(AM_MAKEFLAGS) RECURSIVE_TARGETS=prepare-recursive prepare
	touch stamp-prepare

# Leaf directories (without SUBDIRS) do not have a target
# $(RECURSIVE_TARGETS), so we need to terminate prepare-recursive for
# them here.
prepare-recursive:

# The standard prepare target first recurses, and then calls the
# individual rules.
prepare: prepare-recursive prepare-am

# The local prepare rules are first rules internal to this file
# rules.mk, and second rules local to a single Makefile.am file.  The
# internal rules here create symbolic links for each installed public
# header file of libetpan under $(top_builddir)/include/libetpan/.
prepare-am: prepare-local
	@if test "$(etpaninclude_HEADERS)" != ""; then \
          echo "$(mkinstalldirs) $(top_builddir)/include/libetpan/"; \
          $(mkinstalldirs) $(top_builddir)/include/libetpan/;\
	  echo "cd $(top_builddir)/include/libetpan/"; \
	  cd $(top_builddir)/include/libetpan/ \
	  && for hdr in $(etpaninclude_HEADERS) list_end; do \
           if test $${hdr} != list_end; then \
	         if test -e ../../$(subdir)/$${hdr}; then \
	           echo "$(LN_S) -f ../../$(subdir)/$${hdr} ."; \
	           $(LN_S) -f ../../$(subdir)/$${hdr} .; \
             else \
	           echo "$(LN_S) -f $(srcdir)/$${hdr} ."; \
	           $(LN_S) -f $(srcdir)/$${hdr} .; \
             fi; \
           fi; \
	     done; \
	fi

# Use this target to extend the prepare rules in a single Makefile.am.
prepare-local:

#  Copyright 2007 g10 Code GmbH

#  This file is free software; as a special exception the author gives
#  unlimited permission to copy and/or distribute it, with or without
#  modifications, as long as this notice is preserved.

#  This file is distributed in the hope that it will be useful, but
#  WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
#  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: