INFO: not using any hashes in /data/userland-archives/hashes for openssh-9.3p1.tar.gz (overridden with --hash) Source /data/userland-archives/openssh-9.3p1.tar.gz... not found, skipping file copy Source https://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-9.3p1.tar.gz... downloading... ok validating signature... checking local signature... not found signature validation failed validating hash... ok patching file Makefile.in patching file servconf.c Hunk #1 succeeded at 280 (offset 2 lines). Hunk #2 succeeded at 1403 (offset 65 lines). patching file sshd_config.5 Hunk #1 succeeded at 1568 (offset 83 lines). Hunk #2 succeeded at 2074 (offset 110 lines). patching file configure.ac Hunk #1 succeeded at 1151 (offset 21 lines). patching file gss-serv-krb5.c patching file gss-serv.c patching file servconf.c Hunk #1 succeeded at 605 (offset 11 lines). patching file sshd.c Hunk #1 succeeded at 2291 (offset 11 lines). patching file Makefile.in patching file sftp-server.c patching file sftp64.d patching file sftp_provider.d patching file sftp_provider_impl.h patching file readconf.c Hunk #1 succeeded at 163 (offset -1 lines). Hunk #3 succeeded at 928 (offset 1 line). Hunk #4 succeeded at 2205 (offset 7 lines). Hunk #5 succeeded at 2448 (offset 8 lines). Hunk #6 succeeded at 2652 (offset 9 lines). patching file readconf.h Hunk #1 succeeded at 181 with fuzz 1 (offset 2 lines). Hunk #2 succeeded at 224 (offset 2 lines). patching file ssh_config.5 patching file sshconnect2.c Hunk #1 succeeded at 84 (offset -1 lines). Hunk #2 succeeded at 589 (offset -18 lines). patching file auth-pam.c Hunk #1 succeeded at 1279 (offset 11 lines). Hunk #2 succeeded at 1307 (offset 11 lines). Hunk #3 succeeded at 1361 (offset 11 lines). Hunk #4 succeeded at 1384 (offset 11 lines). Hunk #5 succeeded at 1404 (offset 11 lines). patching file auth-pam.c Hunk #1 succeeded at 687 (offset 5 lines). Hunk #2 succeeded at 760 (offset 5 lines). patching file auth.h patching file auth2.c Hunk #1 succeeded at 294 (offset -3 lines). Hunk #2 succeeded at 339 (offset -3 lines). Hunk #3 succeeded at 376 (offset -3 lines). Hunk #4 succeeded at 403 (offset -3 lines). Hunk #5 succeeded at 439 (offset -3 lines). patching file monitor.c patching file monitor.h patching file monitor_wrap.c patching file servconf.c Hunk #1 succeeded at 198 (offset -1 lines). Hunk #2 succeeded at 449 (offset -1 lines). Hunk #3 succeeded at 546 (offset -1 lines). Hunk #4 succeeded at 700 (offset -1 lines). Hunk #5 succeeded at 2594 (offset -1 lines). patching file servconf.h patching file sshd.8 Hunk #1 succeeded at 1017 (offset 14 lines). patching file sshd_config.5 Hunk #1 succeeded at 1359 (offset 12 lines). Hunk #2 succeeded at 1923 (offset 12 lines). patching file servconf.c Hunk #1 succeeded at 704 (offset 40 lines). patching file INSTALL patching file Makefile.in patching file README.platform patching file audit-bsm.c patching file audit-linux.c patching file audit-solaris.c patching file audit.c patching file audit.h patching file configure.ac Hunk #1 succeeded at 1751 (offset 21 lines). Hunk #2 succeeded at 1788 (offset 21 lines). patching file defines.h patching file sshd.c Hunk #1 succeeded at 2197 (offset 11 lines). Hunk #2 succeeded at 2286 (offset 11 lines). Hunk #3 succeeded at 2318 (offset 11 lines). patching file auth-pam.c Hunk #1 succeeded at 1211 (offset 11 lines). patching file auth-pam.h patching file auth.h patching file auth2-hostbased.c Hunk #1 succeeded at 80 (offset -1 lines). Hunk #2 succeeded at 154 (offset -7 lines). patching file auth2.c Hunk #1 succeeded at 402 (offset -3 lines). patching file monitor.c patching file auth-pam.c Hunk #1 succeeded at 1244 (offset 11 lines). Hunk #2 succeeded at 1352 (offset 11 lines). patching file platform.c patching file session.c Hunk #2 succeeded at 132 (offset -1 lines). Hunk #3 succeeded at 1107 (offset -1 lines). Hunk #4 succeeded at 2014 (offset 4 lines). Hunk #5 succeeded at 2033 (offset 4 lines). Hunk #6 succeeded at 2384 (offset 9 lines). Hunk #7 succeeded at 2569 (offset 9 lines). Hunk #8 succeeded at 2827 (offset 11 lines). patching file session.h patching file auth2-pubkey.c Hunk #4 succeeded at 757 (offset -6 lines). Hunk #5 succeeded at 920 (offset -6 lines). patching file servconf.c Hunk #1 succeeded at 210 (offset -1 lines). Hunk #2 succeeded at 559 (offset -1 lines). Hunk #3 succeeded at 749 (offset 22 lines). Hunk #4 succeeded at 2651 (offset 22 lines). patching file servconf.h patching file servconf.c Hunk #1 succeeded at 954 (offset 31 lines). patching file sshd.c Hunk #1 succeeded at 1980 (offset 15 lines). patching file configure.ac Hunk #1 succeeded at 4732 (offset 40 lines). Hunk #2 succeeded at 4778 (offset 40 lines). patching file pathnames.h patching file servconf.c Hunk #2 succeeded at 221 (offset 2 lines). Hunk #3 succeeded at 359 (offset 2 lines). patching file sshd_config.5 Hunk #1 succeeded at 1321 (offset 83 lines). Hunk #2 succeeded at 1403 (offset 83 lines). patching file compat.c patching file servconf.c Hunk #1 succeeded at 174 (offset -1 lines). Hunk #2 succeeded at 489 (offset 2 lines). Hunk #3 succeeded at 2257 (offset 101 lines). Hunk #4 succeeded at 2957 (offset 136 lines). patching file session.c Hunk #1 succeeded at 842 (offset -1 lines). Hunk #2 succeeded at 1037 (offset -1 lines). Hunk #3 succeeded at 1090 (offset -1 lines). patching file sshd_config patching file sshd_config.5 patching file configure.ac Hunk #1 succeeded at 1646 (offset 21 lines). Hunk #2 succeeded at 5700 (offset 40 lines). patching file sshd.8 Hunk #1 succeeded at 924 (offset 16 lines). Hunk #2 succeeded at 1059 (offset 16 lines). patching file sshd.c Hunk #1 succeeded at 128 (offset -1 lines). Hunk #2 succeeded at 2229 (offset 11 lines). patching file contrib/ssh-copy-id Hunk #1 succeeded at 1 with fuzz 2. patching file regress/misc/sk-dummy/sk-dummy.c checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /usr/gcc/10/bin/gcc accepts -g... yes checking for /usr/gcc/10/bin/gcc option to enable C11 features... none needed checking if /usr/gcc/10/bin/gcc supports C99-style variadic macros... yes checking build system type... x86_64-pc-solaris2.11 checking host system type... x86_64-pc-solaris2.11 checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking whether byte ordering is bigendian... no checking for gawk... gawk checking how to run the C preprocessor... /usr/gcc/10/bin/gcc -E checking for ranlib... ranlib checking for a BSD-compatible install... /usr/bin/ginstall -c checking for grep that handles long lines and -e... /usr/bin/ggrep checking for egrep... /usr/bin/ggrep -E checking for a race-free mkdir -p... /usr/bin/gmkdir -p checking for ar... ar checking for cat... /usr/bin/cat checking for kill... /usr/bin/kill checking for sed... /usr/bin/sed checking for bash... /usr/bin/bash checking for ksh... (cached) /usr/bin/bash checking for sh... (cached) /usr/bin/bash checking for bash... /usr/bin/bash checking for ksh... (cached) /usr/bin/bash checking for sh... (cached) /usr/bin/bash checking for groff... /usr/bin/groff checking for nroff... /usr/bin/nroff checking for mandoc... /usr/bin/mandoc checking for pkg-config... /usr/bin/amd64/pkg-config checking for groupadd... /usr/sbin/groupadd checking for useradd... /usr/sbin/useradd checking for pkgmk... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for passwd... /usr/bin/passwd checking for inline... inline checking for /usr/gcc/10/bin/gcc options needed to detect all undeclared functions... none needed checking whether LLONG_MAX is declared... yes checking whether LONG_LONG_MAX is declared... no checking whether SYSTR_POLICY_KILL is declared... no checking whether RLIMIT_NPROC is declared... no checking whether PR_SET_NO_NEW_PRIVS is declared... no checking whether OpenSSL will be used for cryptography... yes checking if /usr/gcc/10/bin/gcc supports -Werror... yes checking gcc version... 10.4.0 checking clang version... checking if /usr/gcc/10/bin/gcc supports compile flag -pipe... yes checking if /usr/gcc/10/bin/gcc supports compile flag -Wunknown-warning-option... no checking if /usr/gcc/10/bin/gcc supports compile flag -Wno-error=format-truncation... yes checking if /usr/gcc/10/bin/gcc supports compile flag -Qunused-arguments... no checking if /usr/gcc/10/bin/gcc supports compile flag -Wall... yes checking if /usr/gcc/10/bin/gcc supports compile flag -Wextra... no checking if /usr/gcc/10/bin/gcc supports compile flag -Wpointer-arith... yes checking if /usr/gcc/10/bin/gcc supports compile flag -Wuninitialized... yes checking if /usr/gcc/10/bin/gcc supports compile flag -Wsign-compare... yes checking if /usr/gcc/10/bin/gcc supports compile flag -Wformat-security... yes checking if /usr/gcc/10/bin/gcc supports compile flag -Wsizeof-pointer-memaccess... yes checking if /usr/gcc/10/bin/gcc supports compile flag -Wpointer-sign... yes checking if /usr/gcc/10/bin/gcc supports compile flag -Wunused-parameter... no checking if /usr/gcc/10/bin/gcc supports compile flag -Wunused-result... yes checking if /usr/gcc/10/bin/gcc supports compile flag -Wimplicit-fallthrough... yes checking if /usr/gcc/10/bin/gcc supports compile flag -Wmisleading-indentation... yes checking if /usr/gcc/10/bin/gcc supports compile flag -Wbitwise-instead-of-logical... no checking if /usr/gcc/10/bin/gcc supports compile flag -fno-strict-aliasing... yes checking if /usr/gcc/10/bin/gcc supports compile flag -mretpoline... no checking if /usr/gcc/10/bin/gcc supports link flag -Wl,-z,retpolineplt... no checking if /usr/gcc/10/bin/gcc supports compile flag -D_FORTIFY_SOURCE=2... yes checking if /usr/gcc/10/bin/gcc supports link flag -Wl,-z,relro... no checking if /usr/gcc/10/bin/gcc supports link flag -Wl,-z,now... yes checking if /usr/gcc/10/bin/gcc supports link flag -Wl,-z,noexecstack... no checking if /usr/gcc/10/bin/gcc supports compile flag -ftrapv and linking succeeds... yes checking if /usr/gcc/10/bin/gcc supports compile flag -fzero-call-used-regs=all... no checking if /usr/gcc/10/bin/gcc supports compile flag -ftrivial-auto-var-init=zero... no checking if /usr/gcc/10/bin/gcc accepts -fno-builtin-memset... yes checking if /usr/gcc/10/bin/gcc supports -fstack-protector-strong... yes checking if -fstack-protector-strong works... yes checking if compiler allows __attribute__ on return types... yes checking if compiler allows __attribute__ prototype args... yes checking if compiler supports variable length arrays... yes checking if compiler accepts variable declarations after code... yes checking for blf.h... no checking for bstring.h... no checking for crypt.h... yes checking for crypto/sha2.h... no checking for dirent.h... yes checking for endian.h... yes checking for elf.h... yes checking for err.h... yes checking for features.h... no checking for fcntl.h... yes checking for floatingpoint.h... yes checking for fnmatch.h... yes checking for getopt.h... yes checking for glob.h... yes checking for ia.h... no checking for iaf.h... no checking for ifaddrs.h... yes checking for inttypes.h... (cached) yes checking for langinfo.h... yes checking for limits.h... yes checking for locale.h... yes checking for login.h... no checking for maillock.h... yes checking for ndir.h... no checking for net/if_tun.h... yes checking for netdb.h... yes checking for netgroup.h... no checking for pam/pam_appl.h... no checking for paths.h... yes checking for poll.h... yes checking for pty.h... no checking for readpassphrase.h... no checking for rpc/types.h... yes checking for security/pam_appl.h... yes checking for sha2.h... yes checking for shadow.h... yes checking for stddef.h... yes checking for stdint.h... (cached) yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking for sys/bitypes.h... no checking for sys/byteorder.h... yes checking for sys/bsdtty.h... no checking for sys/cdefs.h... no checking for sys/dir.h... no checking for sys/file.h... yes checking for sys/mman.h... yes checking for sys/label.h... no checking for sys/ndir.h... no checking for sys/param.h... yes checking for sys/poll.h... yes checking for sys/prctl.h... no checking for sys/procctl.h... no checking for sys/pstat.h... no checking for sys/ptrace.h... no checking for sys/random.h... yes checking for sys/select.h... yes checking for sys/stream.h... yes checking for sys/stropts.h... yes checking for sys/strtio.h... no checking for sys/statvfs.h... yes checking for sys/sysmacros.h... yes checking for sys/time.h... yes checking for sys/timers.h... no checking for sys/vfs.h... yes checking for time.h... yes checking for tmpdir.h... no checking for ttyent.h... no checking for ucred.h... yes checking for unistd.h... (cached) yes checking for usersec.h... no checking for util.h... no checking for utime.h... yes checking for utmp.h... yes checking for utmpx.h... yes checking for vis.h... no checking for wchar.h... yes checking for sys/audit.h... no checking for sys/capsicum.h... no checking for capsicum_helpers.h... no checking for caph_cache_tzdata... no checking for net/route.h... yes checking for sys/sysctl.h... no checking for lastlog.h... yes checking for sys/ptms.h... yes checking for login_cap.h... no checking for sys/mount.h... yes checking for sys/un.h... yes checking for obsolete utmp and wtmp in solaris2.x... yes checking for setpflags... yes checking for setppriv... yes checking for priv_basicset... yes checking for priv.h... yes checking for ct_tmpl_activate in -lcontract... yes checking for setproject in -lproject... yes checking for Solaris/Illumos privilege support... found checking compiler and flags for sanity... yes checking for setsockopt... no checking for setsockopt in -lsocket... yes checking for dirname... yes checking for libgen.h... yes checking for getspnam... yes checking for library containing basename... none required checking for zlib... yes checking for zlib.h... yes checking for deflate in -lz... yes checking for possibly buggy zlib... no checking for strcasecmp... yes checking for utimes... yes checking for bsd/libutil.h... no checking for libutil.h... no checking for library containing fmt_scaled... no checking for library containing scan_scaled... no checking for library containing login... no checking for library containing logout... no checking for library containing logwtmp... no checking for library containing openpty... no checking for library containing updwtmp... none required checking for fmt_scaled... no checking for scan_scaled... no checking for login... no checking for logout... no checking for openpty... no checking for updwtmp... yes checking for logwtmp... no checking for library containing inet_ntop... none required checking for library containing gethostbyname... -lnsl checking for library containing SHA256Update... -lmd checking for strftime... yes checking for GNU libc compatible malloc... yes checking for GNU libc compatible realloc... (cached) yes checking if calloc(0, N) returns non-null... yes checking for GLOB_ALTDIRFUNC support... yes checking for gl_matchc field in glob_t... yes checking for gl_statv and GLOB_KEEPSTAT extensions for glob... yes checking whether GLOB_NOMATCH is declared... yes checking whether VIS_ALL is declared... no checking whether struct dirent allocates space for d_name... no checking for /proc/pid/fd directory... yes checking for libwrap... yes checking if /usr/bin/amd64/pkg-config knows about libedit... yes checking for el_init in -ledit... yes checking if libedit version is compatible... yes checking for supported audit module... solaris checking for bsm/adt.h... yes checking whether -fPIC is accepted... yes checking for Blowfish_initstate... no checking for Blowfish_expandstate... no checking for Blowfish_expand0state... no checking for Blowfish_stream2word... no checking for SHA256Update... yes checking for SHA384Update... yes checking for SHA512Update... yes checking for asprintf... yes checking for b64_ntop... no checking for __b64_ntop... no checking for b64_pton... no checking for __b64_pton... no checking for bcopy... yes checking for bcrypt_pbkdf... no checking for bindresvport_sa... no checking for blf_enc... no checking for bzero... yes checking for cap_rights_limit... no checking for clock... yes checking for closefrom... yes checking for close_range... no checking for dirfd... yes checking for endgrent... yes checking for err... yes checking for errx... yes checking for explicit_bzero... yes checking for explicit_memset... no checking for fchmod... yes checking for fchmodat... yes checking for fchown... yes checking for fchownat... yes checking for flock... yes checking for fnmatch... yes checking for freeaddrinfo... yes checking for freezero... yes checking for fstatfs... yes checking for fstatvfs... yes checking for futimes... yes checking for getaddrinfo... yes checking for getcwd... yes checking for getentropy... yes checking for getgrouplist... yes checking for getline... yes checking for getnameinfo... yes checking for getopt... yes checking for getpagesize... yes checking for getpeereid... no checking for getpeerucred... yes checking for getpgid... yes checking for _getpty... no checking for getrlimit... yes checking for getrandom... yes checking for getsid... yes checking for getttyent... no checking for glob... yes checking for group_from_gid... no checking for inet_aton... yes checking for inet_ntoa... yes checking for inet_ntop... yes checking for innetgr... yes checking for killpg... yes checking for llabs... yes checking for localtime_r... yes checking for login_getcapbool... no checking for login_getpwclass... no checking for memmem... yes checking for memmove... yes checking for memset_s... yes checking for mkdtemp... yes checking for ngetaddrinfo... no checking for nsleep... no checking for ogetaddrinfo... no checking for openlog_r... no checking for pledge... no checking for poll... yes checking for ppoll... yes checking for prctl... no checking for procctl... no checking for pselect... yes checking for pstat... no checking for raise... yes checking for readpassphrase... no checking for reallocarray... yes checking for realpath... yes checking for recvmsg... yes checking for recallocarray... yes checking for rresvport_af... yes checking for sendmsg... yes checking for setdtablesize... no checking for setegid... yes checking for setenv... yes checking for seteuid... yes checking for setgroupent... no checking for setgroups... yes checking for setlinebuf... yes checking for setlogin... no checking for setpassent... no checking for setpcred... no checking for setproctitle... no checking for setregid... yes checking for setreuid... yes checking for setrlimit... yes checking for setsid... yes checking for setvbuf... yes checking for sigaction... yes checking for sigvec... no checking for snprintf... yes checking for socketpair... yes checking for statfs... yes checking for statvfs... yes checking for strcasestr... yes checking for strdup... yes checking for strerror... yes checking for strlcat... yes checking for strlcpy... yes checking for strmode... no checking for strndup... yes checking for strnlen... yes checking for strnvis... no checking for strptime... yes checking for strsignal... yes checking for strtonum... yes checking for strtoll... yes checking for strtoul... yes checking for strtoull... yes checking for swap32... no checking for sysconf... yes checking for tcgetpgrp... yes checking for timegm... yes checking for timingsafe_bcmp... no checking for truncate... yes checking for unsetenv... yes checking for updwtmpx... yes checking for utimensat... yes checking for user_from_uid... no checking for usleep... yes checking for vasprintf... yes checking for vsnprintf... yes checking for waitpid... yes checking for warn... yes checking whether bzero is declared... yes checking whether memmem is declared... yes checking for mblen... yes checking for mbtowc... yes checking for nl_langinfo... yes checking for wcwidth... yes checking for utf8 locale support... yes checking for library containing dlopen... none required checking for dlopen... yes checking whether RTLD_NOW is declared... yes checking for gai_strerror... yes checking for library containing nanosleep... none required checking for library containing clock_gettime... none required checking whether localtime_r is declared... yes checking whether strsep is declared... yes checking for strsep... yes checking whether tcsendbreak is declared... yes checking whether h_errno is declared... yes checking whether SHUT_RD is declared... yes checking whether getpeereid is declared... no checking whether O_NONBLOCK is declared... yes checking whether ftruncate is declared... yes checking whether getentropy is declared... yes checking whether readv is declared... yes checking whether writev is declared... yes checking whether MAXSYMLINKS is declared... yes checking whether offsetof is declared... yes checking whether howmany is declared... yes checking whether NFDBITS is declared... yes checking for fd_mask... yes checking for setresuid... no checking for setresgid... no checking for working fflush(NULL)... yes checking for gettimeofday... yes checking for time... yes checking for endutent... yes checking for getutent... yes checking for getutid... yes checking for getutline... yes checking for pututline... yes checking for setutent... yes checking for utmpname... yes checking for endutxent... yes checking for getutxent... yes checking for getutxid... yes checking for getutxline... yes checking for getutxuser... no checking for pututxline... yes checking for setutxdb... no checking for setutxent... yes checking for utmpxname... yes checking for getlastlogxbyname... no checking for daemon... yes checking for getpagesize... (cached) yes checking whether snprintf correctly terminates long strings... yes checking whether snprintf understands %zu... yes checking whether vsnprintf returns correct values on overflow... yes checking whether snprintf can declare const char *fmt... yes checking whether AI_NUMERICSERV is declared... yes checking if SA_RESTARTed signals interrupt select()... yes checking for getpgrp... yes checking if getpgrp accepts zero args... yes checking for openssl... /usr/openssl/1.1/bin/openssl checking for openssl/opensslv.h... yes checking OpenSSL header version... 1010114f (OpenSSL 1.1.1t 7 Feb 2023) checking for OpenSSL_version... yes checking for OpenSSL_version_num... yes checking OpenSSL library version... 1010114f (OpenSSL 1.1.1t 7 Feb 2023) checking whether OpenSSL's headers match the library... yes checking if programs using OpenSSL functions will link... yes checking for BN_is_prime_ex... yes checking for DES_crypt... yes checking for DSA_generate_parameters_ex... yes checking for EVP_DigestFinal_ex... yes checking for EVP_DigestInit_ex... yes checking for EVP_MD_CTX_cleanup... no checking for EVP_MD_CTX_copy_ex... yes checking for EVP_MD_CTX_init... no checking for HMAC_CTX_init... no checking for RSA_generate_key_ex... yes checking for RSA_get_default_method... yes checking for OpenSSL_add_all_algorithms... no checking whether OpenSSL_add_all_algorithms is declared... yes checking for OPENSSL_init_crypto... yes checking for DH_get0_key... yes checking for DH_get0_pqg... yes checking for DH_set0_key... yes checking for DH_set_length... yes checking for DH_set0_pqg... yes checking for DSA_get0_key... yes checking for DSA_get0_pqg... yes checking for DSA_set0_key... yes checking for DSA_set0_pqg... yes checking for DSA_SIG_get0... yes checking for DSA_SIG_set0... yes checking for ECDSA_SIG_get0... yes checking for ECDSA_SIG_set0... yes checking for EVP_CIPHER_CTX_iv... yes checking for EVP_CIPHER_CTX_iv_noconst... yes checking for EVP_CIPHER_CTX_get_iv... no checking for EVP_CIPHER_CTX_get_updated_iv... no checking for EVP_CIPHER_CTX_set_iv... no checking for RSA_get0_crt_params... yes checking for RSA_get0_factors... yes checking for RSA_get0_key... yes checking for RSA_set0_crt_params... yes checking for RSA_set0_factors... yes checking for RSA_set0_key... yes checking for RSA_meth_free... yes checking for RSA_meth_dup... yes checking for RSA_meth_set1_name... yes checking for RSA_meth_get_finish... yes checking for RSA_meth_set_priv_enc... yes checking for RSA_meth_set_priv_dec... yes checking for RSA_meth_set_finish... yes checking for EVP_PKEY_get0_RSA... yes checking for EVP_MD_CTX_new... yes checking for EVP_MD_CTX_free... yes checking for EVP_chacha20... yes checking for OpenSSL ENGINE support... yes checking whether OpenSSL has crippled AES support... no checking if EVP_DigestUpdate returns an int... yes checking for EVP_sha256... yes checking for EVP_sha384... yes checking for EVP_sha512... yes checking whether OpenSSL has NID_X9_62_prime256v1... yes checking whether OpenSSL has NID_secp384r1... yes checking whether OpenSSL has NID_secp521r1... yes checking if OpenSSL's NID_secp521r1 is functional... yes checking for EC_KEY_METHOD_new... yes checking whether to enable PKCS11... yes checking whether to enable U2F... yes checking if /usr/bin/amd64/pkg-config knows about libfido2... no checking for fido_init in -lfido2... no checking for fido.h... no checking for fido/credman.h... no checking for usable libfido2 installation... missing fido/credman.h from libfido2 checking for arc4random... yes checking for arc4random_buf... yes checking for arc4random_stir... no checking for arc4random_uniform... yes checking whether OpenSSL's PRNG is internally seeded... yes checking for ia_openinfo in -liaf... no checking for crypt in -lcrypt... yes checking for crypt... yes checking for dlopen in -ldl... yes checking for pam_set_item in -lpam... yes checking for pam_getenvlist... yes checking for pam_putenv... yes checking whether pam_strerror takes only one argument... no checking for struct pollfd.fd... yes checking for nfds_t... yes checking if select and/or poll works with descriptor rlimit... no checking if setrlimit(RLIMIT_NOFILE,{0,0}) works... yes checking if setrlimit RLIMIT_FSIZE works... yes checking for long long... yes checking for unsigned long long... yes checking for long double... yes checking size of short int... 2 checking size of int... 4 checking size of long int... 8 checking size of long long int... 8 checking size of time_t... 8 checking whether UINT32_MAX is declared... yes checking for u_int type... yes checking for intXX_t types... yes checking for int64_t type... yes checking for u_intXX_t types... no checking for u_intXX_t types in sys/socket.h... no checking for u_int64_t types... no checking for uintXX_t types... yes checking for uintXX_t types in stdint.h... yes checking for uintXX_t types in inttypes.h... yes checking for u_char... yes checking for intmax_t... yes checking for uintmax_t... yes checking for socklen_t... yes checking for sig_atomic_t... yes checking for sighandler_t... no checking for fsblkcnt_t... yes checking for fsfilcnt_t... yes checking for struct statfs.f_files... no checking for struct statfs.f_flags... no checking for in_addr_t... yes checking for in_port_t... yes checking for size_t... yes checking for ssize_t... yes checking for clock_t... yes checking for sa_family_t... yes checking for pid_t... yes checking for mode_t... yes checking for struct sockaddr_storage... yes checking for struct sockaddr_in6... yes checking for struct in6_addr... yes checking for struct sockaddr_in6.sin6_scope_id... yes checking for struct addrinfo... yes checking for struct timeval... yes checking for struct timespec... yes checking for ut_host field in utmp.h... no checking for ut_host field in utmpx.h... yes checking for syslen field in utmpx.h... yes checking for ut_pid field in utmp.h... yes checking for ut_type field in utmp.h... yes checking for ut_type field in utmpx.h... yes checking for ut_tv field in utmp.h... no checking for ut_id field in utmp.h... yes checking for ut_id field in utmpx.h... yes checking for ut_addr field in utmp.h... no checking for ut_addr field in utmpx.h... no checking for ut_addr_v6 field in utmp.h... no checking for ut_addr_v6 field in utmpx.h... no checking for ut_exit field in utmp.h... yes checking for ut_time field in utmp.h... yes checking for ut_time field in utmpx.h... yes checking for ut_tv field in utmpx.h... yes checking for ut_ss field in utmpx.h... no checking for struct stat.st_blksize... yes checking for struct stat.st_mtim... yes checking for struct stat.st_mtime... yes checking for struct passwd.pw_gecos... yes checking for struct passwd.pw_class... no checking for struct passwd.pw_change... no checking for struct passwd.pw_expire... no checking for struct __res_state.retrans... yes checking for struct sockaddr_in.sin_len... no checking for ss_family field in struct sockaddr_storage... yes checking for __ss_family field in struct sockaddr_storage... no checking for msg_accrights field in struct msghdr... yes checking if struct statvfs.f_fsid is integral type... yes checking for msg_control field in struct msghdr... no checking if libc defines __progname... yes checking whether /usr/gcc/10/bin/gcc implements __FUNCTION__... yes checking whether /usr/gcc/10/bin/gcc implements __func__... yes checking whether va_copy exists... yes checking whether __va_copy exists... yes checking whether getopt has optreset support... no checking if libc defines sys_errlist... no checking if libc defines sys_nerr... no checking for library containing getrrsetbyname... no checking for library containing res_query... -lresolv checking for library containing dn_expand... none required checking if res_query will link... yes checking for _getshort... yes checking for _getlong... yes checking whether _getshort is declared... no checking whether _getlong is declared... no checking for HEADER.ad... no checking if struct __res_state _res is an extern... yes checking if /usr/bin/amd64/pkg-config knows about kerberos5... no checking for krb5-config... /usr/bin/krb5-config SunOS 5.11 checking whether we are using Heimdal... no checking for library containing dn_expand... (cached) none required checking for gss_init_sec_context in -lgssapi_krb5... no checking for gss_init_sec_context in -lgssapi... no checking for gss_init_sec_context in -lgss... yes checking for gssapi.h... no checking for gssapi.h... no configure: WARNING: Cannot find any suitable gss-api header - build may fail checking for gssapi_krb5.h... no checking for gssapi.h... (cached) no checking for gssapi/gssapi.h... yes checking for gssapi_krb5.h... (cached) no checking for gssapi/gssapi_krb5.h... no checking for gssapi_generic.h... no checking for gssapi/gssapi_generic.h... no checking for library containing k_hasafs... no checking whether GSS_C_NT_HOSTBASED_SERVICE is declared... yes checking for krb5_cc_new_unique... no checking for krb5_get_error_message... yes checking for krb5_free_error_message... yes checking Discovering system mail directory... Using: /var/mail from _PATH_MAILDIR checking for "/dev/ptmx"... yes checking for "/dev/ptc"... no checking if the systems has expire shadow information... yes checking for "/etc/default/login"... yes configure: WARNING: If PATH is defined in /etc/default/login, ensure the path to scp is included, otherwise scp will not work. checking if we need to convert IPv4 in IPv6-mapped addresses... yes checking if your system defines LASTLOG_FILE... no checking if your system defines _PATH_LASTLOG... no checking if your system defines UTMP_FILE... yes checking if your system defines WTMP_FILE... yes checking if your system defines WTMPX_FILE... yes checking for struct lastlog.ll_line... yes checking for struct utmp.ut_line... yes checking whether BROKEN_GETADDRINFO is declared... no configure: creating ./config.status config.status: creating Makefile config.status: creating buildpkg.sh config.status: creating opensshd.init config.status: creating openssh.xml config.status: creating openbsd-compat/Makefile config.status: creating openbsd-compat/regress/Makefile config.status: creating survey.sh config.status: creating config.h OpenSSH has been configured with the following options: User binaries: /usr/bin System binaries: /usr/lib/ssh Configuration files: /etc/ssh Askpass program: /usr/lib/ssh/ssh-askpass Manual pages: /usr/share/man/manX PID file: /var/run Privilege separation chroot path: /var/empty sshd default user PATH: /usr/ccs/bin:/usr/bin:/bin:/usr/sbin:/sbin (If PATH is set in /etc/default/login it will be used instead. If used, ensure the path to scp is present, otherwise scp will not work.) Manpage format: doc PAM support: yes OSF SIA support: no KerberosV support: yes SELinux support: no TCP Wrappers support: yes libedit support: yes libldns support: no Solaris process contract support: yes Solaris project support: yes Solaris privilege support: yes IP address in $DISPLAY hack: no Translate v4 in v6 hack: yes BSD Auth support: no Random number source: OpenSSL internal ONLY Privsep sandbox style: solaris PKCS#11 support: yes U2F/FIDO support: yes Host: x86_64-pc-solaris2.11 Compiler: /usr/gcc/10/bin/gcc Compiler flags: -m64 -O3 -DSET_USE_PAM -DPAM_ENHANCEMENT -DPAM_BUGFIX -DDTRACE_SFTP -I/usr/include/kerberosv5/ -DKRB5_BUILD_FIX -DDISABLE_BANNER -DDEPRECATE_SUNSSH_OPT -DOPTION_DEFAULT_VALUE -DSANDBOX_SOLARIS -DPER_SESSION_XAUTHFILE -I/usr/openssl/1.1/include -pipe -Wno-error=format-truncation -Wall -Wpointer-arith -Wuninitialized -Wsign-compare -Wformat-security -Wsizeof-pointer-memaccess -Wno-pointer-sign -Wno-unused-result -Wimplicit-fallthrough -Wmisleading-indentation -fno-strict-aliasing -D_FORTIFY_SOURCE=2 -ftrapv -fno-builtin-memset -fstack-protector-strong Preprocessor flags: -I/usr/openssl/1.1/lib/64 -I/usr/include/editline -I/usr/local/include -I/usr/local/include/gssapi Linker flags: -L/usr/openssl/1.1/lib/64 -m64 -B direct -z nolazyload -Wl,-z,now -fstack-protector-strong -L/usr/local/lib Libraries: -lresolv -lmd -lnsl -lsocket -lcontract -lproject +for channels: -lcrypto -lz +for sshd: -lcrypt -lwrap -lbsm -lpam -ldl SVR4 style packages are supported with "make package" PAM is enabled. You may need to install a PAM control file for sshd, otherwise password authentication may fail. Example PAM control files can be found in the contrib/ subdirectory make[3]: warning: -j8 forced in submake: resetting jobserver mode. Makefile:715: warning: ignoring prerequisites on suffix rule definition /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/channels.c: In function 'channel_handle_wfd': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/channels.c:2137:17: warning: unused variable 'tio' [-Wunused-variable] 2137 | struct termios tio; | ^~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/openbsd-compat/bsd-getpeereid.c: In function 'getpeereid': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/openbsd-compat/bsd-getpeereid.c:53:37: warning: comparison of integer expressions of different signedness: 'uid_t' {aka 'unsigned int'} and 'int' [-Wsign-compare] 53 | if ((*euid = ucred_geteuid(ucred)) == -1) | ^~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/openbsd-compat/bsd-getpeereid.c:55:36: warning: comparison of integer expressions of different signedness: 'gid_t' {aka 'unsigned int'} and 'int' [-Wsign-compare] 55 | if ((*gid = ucred_getrgid(ucred)) == -1) | ^~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/compat.c: In function 'append_proposal': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/compat.c:156:11: warning: implicit declaration of function 'sshbuf_new' [-Wimplicit-function-declaration] 156 | if ((b = sshbuf_new()) == NULL) | ^~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/compat.c:156:9: warning: assignment to 'struct sshbuf *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 156 | if ((b = sshbuf_new()) == NULL) | ^ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/compat.c:158:2: warning: implicit declaration of function 'sshbuf_put'; did you mean 'sshpkt_put'? [-Wimplicit-function-declaration] 158 | sshbuf_put(b, proposal, strlen(proposal)); | ^~~~~~~~~~ | sshpkt_put /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/compat.c:159:6: warning: implicit declaration of function 'sshbuf_len' [-Wimplicit-function-declaration] 159 | if (sshbuf_len(b) > 0) | ^~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/compat.c:163:13: warning: implicit declaration of function 'sshbuf_dup_string'; did you mean 'sshpkt_put_string'? [-Wimplicit-function-declaration] 163 | fix_prop = sshbuf_dup_string(b); | ^~~~~~~~~~~~~~~~~ | sshpkt_put_string /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/compat.c:163:11: warning: assignment to 'char *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 163 | fix_prop = sshbuf_dup_string(b); | ^ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/compat.c:164:2: warning: implicit declaration of function 'sshbuf_free' [-Wimplicit-function-declaration] 164 | sshbuf_free(b); | ^~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/compat.c: In function 'compat_kex_proposal': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/compat.c:187:23: warning: passing argument 1 of 'append_proposal' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 187 | p = append_proposal(p, "diffie-hellman-group14-sha1"); | ^ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/compat.c:149:23: note: expected 'char *' but argument is of type 'const char *' 149 | append_proposal(char *proposal, const char *append) | ~~~~~~^~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/compat.c:188:23: warning: passing argument 1 of 'append_proposal' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 188 | p = append_proposal(p, "diffie-hellman-group1-sha1"); | ^ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/compat.c:149:23: note: expected 'char *' but argument is of type 'const char *' 149 | append_proposal(char *proposal, const char *append) | ~~~~~~^~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/log.c: In function 'do_log': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/log.c:395:39: warning: ': ' directive output may be truncated writing 2 bytes into a region of size between 1 and 1024 [-Wformat-truncation=] 395 | snprintf(fmtbuf, sizeof(fmtbuf), "%s: %s", msgbuf, suffix); | ^~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/log.c:395:3: note: 'snprintf' output 3 or more bytes (assuming 1026) into a destination of size 1024 395 | snprintf(fmtbuf, sizeof(fmtbuf), "%s: %s", msgbuf, suffix); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/log.c:407:44: warning: ' ' directive output may be truncated writing 2 bytes into a region of size between 1 and 1024 [-Wformat-truncation=] 407 | snprintf(msgbuf, sizeof msgbuf, "%s%s%.*s\r\n", | ^~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/log.c:407:3: note: 'snprintf' output between 3 and 1026 bytes into a destination of size 1024 407 | snprintf(msgbuf, sizeof msgbuf, "%s%s%.*s\r\n", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 408 | (log_on_stderr > 1) ? progname : "", | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 409 | (log_on_stderr > 1) ? ": " : "", | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 410 | (int)sizeof msgbuf - 3, fmtbuf); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/openbsd-compat/fmt_scaled.c: In function 'fmt_scaled': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/openbsd-compat/fmt_scaled.c:278:47: warning: '%lld' directive output may be truncated writing between 1 and 20 bytes into a region of size 7 [-Wformat-truncation=] 278 | (void)snprintf(result, FMT_SCALED_STRSIZE, "%lld.%1lld%c", | ^~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/openbsd-compat/fmt_scaled.c:278:46: note: directive argument in the range [-9223372036854775807, 9223372036854775807] 278 | (void)snprintf(result, FMT_SCALED_STRSIZE, "%lld.%1lld%c", | ^~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/openbsd-compat/fmt_scaled.c:278:46: note: directive argument in the range [-9007199254740991, 9] /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/openbsd-compat/fmt_scaled.c:278:9: note: 'snprintf' output between 5 and 40 bytes into a destination of size 7 278 | (void)snprintf(result, FMT_SCALED_STRSIZE, "%lld.%1lld%c", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 279 | number, fract, scale_chars[unit]); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/misc.c: In function 'fmt_timeframe': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/misc.c:651:26: warning: '%02llu' directive output may be truncated writing between 2 and 14 bytes into a region of size 9 [-Wformat-truncation=] 651 | snprintf(buf, TF_LEN, "%02lluw%01ud%02uh", week, day, hrs); | ^~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/misc.c:651:25: note: directive argument in the range [0, 30500568904943] 651 | snprintf(buf, TF_LEN, "%02lluw%01ud%02uh", week, day, hrs); | ^~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/misc.c:651:25: note: directive argument in the range [0, 6] /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/misc.c:651:25: note: directive argument in the range [0, 23] /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/misc.c:651:3: note: 'snprintf' output between 9 and 21 bytes into a destination of size 9 651 | snprintf(buf, TF_LEN, "%02lluw%01ud%02uh", week, day, hrs); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/openbsd-compat/port-solaris.c:31: /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/openbsd-compat/port-solaris.c: In function 'solaris_contract_post_fork_parent': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/openbsd-compat/port-solaris.c:169:9: warning: format '%ld' expects argument of type 'long int', but argument 9 has type 'ctid_t' {aka 'int'} [-Wformat=] 169 | debug2("%s: abandoning contract id %ld", __func__, ctid); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~ | | | ctid_t {aka int} /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/openbsd-compat/../log.h:89:89: note: in definition of macro 'debug2' 89 | #define debug2(...) sshlog(__FILE__, __func__, __LINE__, 0, SYSLOG_LEVEL_DEBUG2, NULL, __VA_ARGS__) | ^~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/openbsd-compat/port-solaris.c:169:39: note: format string is defined here 169 | debug2("%s: abandoning contract id %ld", __func__, ctid); | ~~^ | | | long int | %d ar: creating libopenbsd-compat.a ar: writing libopenbsd-compat.a a - bsd-asprintf.o a - bsd-closefrom.o a - bsd-cygwin_util.o a - bsd-err.o a - bsd-flock.o a - bsd-getentropy.o a - bsd-getline.o a - bsd-getpagesize.o a - bsd-getpeereid.o a - bsd-malloc.o a - bsd-misc.o a - bsd-nextstep.o a - bsd-openpty.o a - bsd-poll.o a - bsd-pselect.o a - bsd-setres_id.o a - bsd-signal.o a - bsd-snprintf.o a - bsd-statvfs.o a - bsd-timegm.o a - bsd-waitpid.o a - fake-rfc2553.o a - getrrsetbyname-ldns.o a - kludge-fd_set.o a - openssl-compat.o a - libressl-api-compat.o a - xcrypt.o a - arc4random.o a - arc4random_uniform.o a - base64.o a - basename.o a - bcrypt_pbkdf.o a - bindresvport.o a - blowfish.o a - daemon.o a - dirname.o a - explicit_bzero.o a - fmt_scaled.o a - freezero.o a - fnmatch.o a - getcwd.o a - getgrouplist.o a - getopt_long.o a - getrrsetbyname.o a - glob.o a - inet_aton.o a - inet_ntoa.o a - inet_ntop.o a - md5.o a - memmem.o a - mktemp.o a - pwcache.o a - readpassphrase.o a - reallocarray.o a - recallocarray.o a - rresvport.o a - setenv.o a - setproctitle.o a - sha1.o a - sha2.o a - sigact.o a - strcasestr.o a - strlcat.o a - strlcpy.o a - strmode.o a - strndup.o a - strnlen.o a - strptime.o a - strsep.o a - strtoll.o a - strtonum.o a - strtoull.o a - strtoul.o a - timingsafe_bcmp.o a - vis.o a - port-aix.o a - port-irix.o a - port-linux.o a - port-prngd.o a - port-solaris.o a - port-net.o a - port-uw.o /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c: In function 'fill_default_server_options': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:492:30: warning: comparison of integer expressions of different signedness: 'u_int' {aka 'unsigned int'} and 'int' [-Wsign-compare] 492 | if (options->num_accept_env == -1) { | ^~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c: In function 'process_server_config_line_depth': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2260:32: warning: comparison of integer expressions of different signedness: 'u_int' {aka 'unsigned int'} and 'int' [-Wsign-compare] 2260 | if (options->num_accept_env == -1) | ^~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c: In function 'copy_set_server_options': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2960:36: warning: comparison of integer expressions of different signedness: 'u_int' {aka 'unsigned int'} and 'int' [-Wsign-compare] 2960 | if (src->num_s != 0 && src->num_s != -1) { \ | ^~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.h:296:3: note: in expansion of macro 'M_CP_STRARRAYOPT' 296 | M_CP_STRARRAYOPT(authorized_keys_files, num_authkeys_files); \ | ^~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2972:2: note: in expansion of macro 'COPY_MATCH_STRING_OPTS' 2972 | COPY_MATCH_STRING_OPTS(); | ^~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2960:36: warning: comparison of integer expressions of different signedness: 'u_int' {aka 'unsigned int'} and 'int' [-Wsign-compare] 2960 | if (src->num_s != 0 && src->num_s != -1) { \ | ^~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.h:297:3: note: in expansion of macro 'M_CP_STRARRAYOPT' 297 | M_CP_STRARRAYOPT(allow_users, num_allow_users); \ | ^~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2972:2: note: in expansion of macro 'COPY_MATCH_STRING_OPTS' 2972 | COPY_MATCH_STRING_OPTS(); | ^~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2960:36: warning: comparison of integer expressions of different signedness: 'u_int' {aka 'unsigned int'} and 'int' [-Wsign-compare] 2960 | if (src->num_s != 0 && src->num_s != -1) { \ | ^~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.h:298:3: note: in expansion of macro 'M_CP_STRARRAYOPT' 298 | M_CP_STRARRAYOPT(deny_users, num_deny_users); \ | ^~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2972:2: note: in expansion of macro 'COPY_MATCH_STRING_OPTS' 2972 | COPY_MATCH_STRING_OPTS(); | ^~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2960:36: warning: comparison of integer expressions of different signedness: 'u_int' {aka 'unsigned int'} and 'int' [-Wsign-compare] 2960 | if (src->num_s != 0 && src->num_s != -1) { \ | ^~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.h:299:3: note: in expansion of macro 'M_CP_STRARRAYOPT' 299 | M_CP_STRARRAYOPT(allow_groups, num_allow_groups); \ | ^~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2972:2: note: in expansion of macro 'COPY_MATCH_STRING_OPTS' 2972 | COPY_MATCH_STRING_OPTS(); | ^~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2960:36: warning: comparison of integer expressions of different signedness: 'u_int' {aka 'unsigned int'} and 'int' [-Wsign-compare] 2960 | if (src->num_s != 0 && src->num_s != -1) { \ | ^~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.h:300:3: note: in expansion of macro 'M_CP_STRARRAYOPT' 300 | M_CP_STRARRAYOPT(deny_groups, num_deny_groups); \ | ^~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2972:2: note: in expansion of macro 'COPY_MATCH_STRING_OPTS' 2972 | COPY_MATCH_STRING_OPTS(); | ^~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2960:36: warning: comparison of integer expressions of different signedness: 'u_int' {aka 'unsigned int'} and 'int' [-Wsign-compare] 2960 | if (src->num_s != 0 && src->num_s != -1) { \ | ^~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.h:301:3: note: in expansion of macro 'M_CP_STRARRAYOPT' 301 | M_CP_STRARRAYOPT(accept_env, num_accept_env); \ | ^~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2972:2: note: in expansion of macro 'COPY_MATCH_STRING_OPTS' 2972 | COPY_MATCH_STRING_OPTS(); | ^~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2960:36: warning: comparison of integer expressions of different signedness: 'u_int' {aka 'unsigned int'} and 'int' [-Wsign-compare] 2960 | if (src->num_s != 0 && src->num_s != -1) { \ | ^~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.h:302:3: note: in expansion of macro 'M_CP_STRARRAYOPT' 302 | M_CP_STRARRAYOPT(setenv, num_setenv); \ | ^~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2972:2: note: in expansion of macro 'COPY_MATCH_STRING_OPTS' 2972 | COPY_MATCH_STRING_OPTS(); | ^~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2960:36: warning: comparison of integer expressions of different signedness: 'u_int' {aka 'unsigned int'} and 'int' [-Wsign-compare] 2960 | if (src->num_s != 0 && src->num_s != -1) { \ | ^~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.h:303:3: note: in expansion of macro 'M_CP_STRARRAYOPT' 303 | M_CP_STRARRAYOPT(auth_methods, num_auth_methods); \ | ^~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2972:2: note: in expansion of macro 'COPY_MATCH_STRING_OPTS' 2972 | COPY_MATCH_STRING_OPTS(); | ^~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2960:36: warning: comparison of integer expressions of different signedness: 'u_int' {aka 'unsigned int'} and 'int' [-Wsign-compare] 2960 | if (src->num_s != 0 && src->num_s != -1) { \ | ^~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.h:304:3: note: in expansion of macro 'M_CP_STRARRAYOPT' 304 | M_CP_STRARRAYOPT(permitted_opens, num_permitted_opens); \ | ^~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2972:2: note: in expansion of macro 'COPY_MATCH_STRING_OPTS' 2972 | COPY_MATCH_STRING_OPTS(); | ^~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2960:36: warning: comparison of integer expressions of different signedness: 'u_int' {aka 'unsigned int'} and 'int' [-Wsign-compare] 2960 | if (src->num_s != 0 && src->num_s != -1) { \ | ^~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.h:305:3: note: in expansion of macro 'M_CP_STRARRAYOPT' 305 | M_CP_STRARRAYOPT(permitted_listens, num_permitted_listens); \ | ^~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2972:2: note: in expansion of macro 'COPY_MATCH_STRING_OPTS' 2972 | COPY_MATCH_STRING_OPTS(); | ^~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2960:36: warning: comparison of integer expressions of different signedness: 'u_int' {aka 'unsigned int'} and 'int' [-Wsign-compare] 2960 | if (src->num_s != 0 && src->num_s != -1) { \ | ^~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.h:306:3: note: in expansion of macro 'M_CP_STRARRAYOPT' 306 | M_CP_STRARRAYOPT(channel_timeouts, num_channel_timeouts); \ | ^~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2972:2: note: in expansion of macro 'COPY_MATCH_STRING_OPTS' 2972 | COPY_MATCH_STRING_OPTS(); | ^~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2960:36: warning: comparison of integer expressions of different signedness: 'u_int' {aka 'unsigned int'} and 'int' [-Wsign-compare] 2960 | if (src->num_s != 0 && src->num_s != -1) { \ | ^~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.h:307:3: note: in expansion of macro 'M_CP_STRARRAYOPT' 307 | M_CP_STRARRAYOPT(log_verbose, num_log_verbose); \ | ^~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/servconf.c:2972:2: note: in expansion of macro 'COPY_MATCH_STRING_OPTS' 2972 | COPY_MATCH_STRING_OPTS(); | ^~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/auth2.c: In function 'input_userauth_request': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/auth2.c:350:5: warning: implicit declaration of function 'mm_inform_authmethod'; did you mean 'mm_inform_authserv'? [-Wimplicit-function-declaration] 350 | mm_inform_authmethod(method); | ^~~~~~~~~~~~~~~~~~~~ | mm_inform_authserv In file included from /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/auth2.c:58: /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/auth2.c:351:22: warning: passing argument 1 of 'mm_start_pam' from incompatible pointer type [-Wincompatible-pointer-types] 351 | PRIVSEP(start_pam(authctxt)); | ^~~~~~~~ | | | Authctxt * /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/monitor_wrap.h:32:40: note: in definition of macro 'PRIVSEP' 32 | #define PRIVSEP(x) (use_privsep ? mm_##x : x) | ^ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/monitor_wrap.h:73:31: note: expected 'struct ssh *' but argument is of type 'Authctxt *' 73 | void mm_start_pam(struct ssh *ssh); | ~~~~~~~~~~~~^~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/auth2.c:351:22: warning: passing argument 1 of 'start_pam' from incompatible pointer type [-Wincompatible-pointer-types] 351 | PRIVSEP(start_pam(authctxt)); | ^~~~~~~~ | | | Authctxt * /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/monitor_wrap.h:32:44: note: in definition of macro 'PRIVSEP' 32 | #define PRIVSEP(x) (use_privsep ? mm_##x : x) | ^ In file included from /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/auth.h:172, from /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/auth2.c:51: /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/auth-pam.h:30:16: note: expected 'struct ssh *' but argument is of type 'Authctxt *' 30 | void start_pam(struct ssh *); | ^~~~~~~~~~~~ In file included from /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/auth2-pubkey.c:58: In function 'user_key_allowed_from_plugin', inlined from 'user_key_allowed' at /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/auth2-pubkey.c:923:12: /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/log.h:91:23: warning: '%s' directive argument is null [-Wformat-overflow=] 91 | #define verbose(...) sshlog(__FILE__, __func__, __LINE__, 0, SYSLOG_LEVEL_VERBOSE, NULL, __VA_ARGS__) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/auth2-pubkey.c:868:3: note: in expansion of macro 'verbose' 868 | verbose("Found matching %s key: %s", sshkey_type(key), fp); | ^~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/auth2-pubkey.c: In function 'user_key_allowed': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/auth2-pubkey.c:868:35: note: format string is defined here 868 | verbose("Found matching %s key: %s", sshkey_type(key), fp); | ^~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/gss-serv.c: In function 'ssh_gssapi_storecreds': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/gss-serv.c:354:12: warning: implicit declaration of function 'sshbuf_new'; did you mean 'sshkey_new'? [-Wimplicit-function-declaration] 354 | if ((b = sshbuf_new()) == NULL) fatal("malloc"); | ^~~~~~~~~~ | sshkey_new /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/gss-serv.c:354:10: warning: assignment to 'struct sshbuf *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 354 | if ((b = sshbuf_new()) == NULL) fatal("malloc"); | ^ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/gss-serv.c:359:4: warning: implicit declaration of function 'sshbuf_put' [-Wimplicit-function-declaration] 359 | sshbuf_put(b, msg.value, msg.length); | ^~~~~~~~~~ In file included from /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/gss-serv.c:42: /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/gss-serv.c:373:7: warning: implicit declaration of function 'sshbuf_ptr' [-Wimplicit-function-declaration] 373 | sshbuf_ptr(b)); | ^~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/log.h:93:87: note: in definition of macro 'error' 93 | #define error(...) sshlog(__FILE__, __func__, __LINE__, 0, SYSLOG_LEVEL_ERROR, NULL, __VA_ARGS__) | ^~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/gss-serv.c:372:9: warning: format '%s' expects argument of type 'char *', but argument 8 has type 'int' [-Wformat=] 372 | error("GSS-API error while storing delegated credentials: %s", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 373 | sshbuf_ptr(b)); | ~~~~~~~~~~~~~ | | | int /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/log.h:93:87: note: in definition of macro 'error' 93 | #define error(...) sshlog(__FILE__, __func__, __LINE__, 0, SYSLOG_LEVEL_ERROR, NULL, __VA_ARGS__) | ^~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/gss-serv.c:372:62: note: format string is defined here 372 | error("GSS-API error while storing delegated credentials: %s", | ~^ | | | char * | %d /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/gss-serv.c:374:3: warning: implicit declaration of function 'sshbuf_free'; did you mean 'sshkey_free'? [-Wimplicit-function-declaration] 374 | sshbuf_free(b); | ^~~~~~~~~~~ | sshkey_free In function 'line_abbrevname', inlined from 'construct_utmpx' at /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/loginrec.c:750:2: /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/loginrec.c:622:3: warning: 'strncpy' output may be truncated copying 4 bytes from a string of length 63 [-Wstringop-truncation] 622 | strncpy(dst, src, (size_t)dstsize); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/loginrec.c: In function 'construct_utmpx': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/loginrec.c:767:2: warning: 'strncpy' output may be truncated copying 32 bytes from a string of length 511 [-Wstringop-truncation] 767 | strncpy(utx->ut_user, li->username, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 768 | MIN_SIZEOF(utx->ut_user, li->username)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'line_abbrevname', inlined from 'utmpx_perform_logout' at /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/loginrec.c:1052:2: /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/loginrec.c:622:3: warning: 'strncpy' output may be truncated copying 4 bytes from a string of length 63 [-Wstringop-truncation] 622 | strncpy(dst, src, (size_t)dstsize); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/ssh-keygen.c: In function 'do_convert_to': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/ssh-keygen.c:361:34: warning: '%s' directive output may be truncated writing up to 1024 bytes into a region of size 39 [-Wformat-truncation=] 361 | "%u-bit %s, converted by %s@%s from OpenSSH", | ^~ 362 | sshkey_size(k), sshkey_type(k), 363 | pw->pw_name, hostname); | ~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/ssh-keygen.c:360:2: note: 'snprintf' output 36 or more bytes (assuming 1060) into a destination of size 61 360 | snprintf(comment, sizeof(comment), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 361 | "%u-bit %s, converted by %s@%s from OpenSSH", | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 362 | sshkey_size(k), sshkey_type(k), | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 363 | pw->pw_name, hostname); | ~~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/scp.c: In function 'rsource': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/scp.c:1511:47: warning: '%.1024s' directive output may be truncated writing up to 1024 bytes into a region of size 1016 [-Wformat-truncation=] 1511 | (void) snprintf(path, sizeof path, "D%04o %d %.1024s\n", | ^~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/scp.c:1511:9: note: 'snprintf' output between 10 and 1034 bytes into a destination of size 1024 1511 | (void) snprintf(path, sizeof path, "D%04o %d %.1024s\n", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1512 | (u_int) (statp->st_mode & FILEMODEMASK), 0, last); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/ssh-keygen.c: In function 'do_gen_all_hostkeys': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/ssh-keygen.c:1120:41: warning: '%s' directive output may be truncated writing up to 1024 bytes into a region of size 1023 [-Wformat-truncation=] 1120 | snprintf(comment, sizeof comment, "%s@%s", pw->pw_name, | ^~ 1121 | hostname); | ~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/ssh-keygen.c:1120:3: note: 'snprintf' output 2 or more bytes (assuming 1026) into a destination of size 1024 1120 | snprintf(comment, sizeof comment, "%s@%s", pw->pw_name, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1121 | hostname); | ~~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/ssh-keygen.c: In function 'main': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/ssh-keygen.c:3901:41: warning: '%s' directive output may be truncated writing up to 1024 bytes into a region of size 1023 [-Wformat-truncation=] 3901 | snprintf(comment, sizeof comment, "%s@%s", pw->pw_name, hostname); | ^~ ~~~~~~~~ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/ssh-keygen.c:3901:3: note: 'snprintf' output 2 or more bytes (assuming 1026) into a destination of size 1024 3901 | snprintf(comment, sizeof comment, "%s@%s", pw->pw_name, hostname); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/sftp-server.c:60: /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/sftp-server.c: In function 'process_read': /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/sftp_provider_impl.h:51:23: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized] 51 | (proto)->sftp_nbytes = (len); \ | ^ /jenkins/jobs/oi-userland/workspace/components/network/openssh/openssh-9.3p1/sftp-server.c:807:21: note: 'ret' was declared here 807 | int r, handle, fd, ret, status = SSH2_FX_FAILURE; | ^~~ ar: creating libssh.a ar: writing libssh.a a - ssh_api.o a - ssherr.o a - sshbuf.o a - sshkey.o a - sshbuf-getput-basic.o a - sshbuf-misc.o a - sshbuf-getput-crypto.o a - krl.o a - bitmap.o a - ssh-xmss.o a - sshkey-xmss.o a - xmss_commons.o a - xmss_fast.o a - xmss_hash.o a - xmss_hash_address.o a - xmss_wots.o a - authfd.o a - authfile.o a - canohost.o a - channels.o a - cipher.o a - cipher-aes.o a - cipher-aesctr.o a - cleanup.o a - compat.o a - fatal.o a - hostfile.o a - log.o a - match.o a - moduli.o a - nchan.o a - packet.o a - readpass.o a - ttymodes.o a - xmalloc.o a - addr.o a - addrmatch.o a - atomicio.o a - dispatch.o a - mac.o a - misc.o a - utf8.o a - monitor_fdpass.o a - rijndael.o a - ssh-dss.o a - ssh-ecdsa.o a - ssh-ecdsa-sk.o a - ssh-ed25519-sk.o a - ssh-rsa.o a - dh.o a - msg.o a - progressmeter.o a - dns.o a - entropy.o a - gss-genr.o a - umac.o a - umac128.o a - sftp_provider.o a - ssh-pkcs11.o a - smult_curve25519_ref.o a - poly1305.o a - chacha.o a - cipher-chachapoly.o a - cipher-chachapoly-libcrypto.o a - ssh-ed25519.o a - digest-openssl.o a - digest-libc.o a - hmac.o a - ed25519.o a - hash.o a - kex.o a - kexdh.o a - kexgex.o a - kexecdh.o a - kexc25519.o a - kexgexc.o a - kexgexs.o a - kexsntrup761x25519.o a - sntrup761.o a - kexgen.o a - sftp-realpath.o a - platform-pledge.o a - platform-tracing.o a - platform-misc.o a - sshbuf-io.o Makefile:715: warning: ignoring prerequisites on suffix rule definition Oracle Solaris: skipping check-config VALIDATING MANIFEST CONTENT: /jenkins/jobs/oi-userland/workspace/components/network/openssh/build/manifest-i386-ssh-service.depend.res /jenkins/jobs/oi-userland/workspace/components/network/openssh/build/manifest-i386-ssh.depend.res /jenkins/jobs/oi-userland/workspace/components/network/openssh/build/manifest-i386-network---openssh.depend.res /jenkins/jobs/oi-userland/workspace/components/network/openssh/build/manifest-i386-network---ssh---ssh-key.depend.res /jenkins/jobs/oi-userland/workspace/components/network/openssh/build/manifest-i386-service---network---ssh-common.depend.res NEW PACKAGE CONTENTS ARE LOCALLY VALIDATED AND READY TO GO NEW PACKAGE CONTENTS ARE LOCALLY VALIDATED AND READY TO GO NEW PACKAGE CONTENTS ARE LOCALLY VALIDATED AND READY TO GO NEW PACKAGE CONTENTS ARE LOCALLY VALIDATED AND READY TO GO NEW PACKAGE CONTENTS ARE LOCALLY VALIDATED AND READY TO GO generating metadata: network/openssh pkg://openindiana.org/service/network/ssh@9.3.0.1,5.11-2023.0.0.0:20230326T140129Z PUBLISHED pkg://openindiana.org/network/ssh@9.3.0.1,5.11-2023.0.0.0:20230326T140150Z PUBLISHED pkg://openindiana.org/network/openssh@7.2.0.2,5.11-2016.0.0.1:20230326T140211Z PUBLISHED pkg://openindiana.org/network/ssh/ssh-key@7.2.0.2,5.11-2016.0.0.1:20230326T140230Z PUBLISHED pkg://openindiana.org/service/network/ssh-common@7.2.0.2,5.11-2016.0.0.1:20230326T140249Z PUBLISHED